it would be possible to ensure that with the three buttons below those for selecting pages from 1 to 5 it would be possible to change between wing 0,1,2 or better yet to ensure that perhaps with the first one it would be possible to select the core fader page and bwing 1 , with the second button fwing1 and bwing 1 and with the third fwing 2 and bwing 2? sorry for my english
@@Towmooo I understand what you want to achieve - but as I mentioned, it is not possible with the F-wing. By default, I set it up so that the page switching only affects the B-wing, meaning the executors themselves - the faders always work on one page because they are not mechanical. In this case, I recommend disabling Global Auto Fix, because each executor page is available to you separately and does not display the active executors from other pages. Of course, you can enable the page switching mode for both executors and faders, but in this case, you need to have the Auto Fix function enabled, because after switching the page for the fader, you need to lower it completely to deactivate the cue from the other page, and then you can control that cue on the current page. Unfortunately, this Auto Fix option does not switch between F-wing 1 and F-wing 2, so it does not make sense at all. My first code that I created for the APC had a functionality of switching between wings, but then I created something akin to virtual faders on the buttons. However, it was impractical and caused problems, so I will say it again - it is not possible to switch between wings during operation. Of course, you could switch between B-wing 1 and B-wing 2, but since you have several pages, it is unnecessary as well. You can always connect a second controller and use both simultaneously, which I also practice myself. If you want to switch between F-wing 1 and F-wing 2, I recommend using the BCF2000 controller. If, for example, you want to switch between B-wing 1 and B-wing 2, you can use my code for the Elgato Stream Deck! Moreover, the option of recognizing executor names used there has been utilized to display custom images, making it a very pleasant solution.
@@KrzysztofKorzeniowski Thank you very much for the more than exhaustive response. Indeed, I hadn’t considered some things. In any case, I want to compliment you on the work you’ve done and for responding to my comment despite the video being old.
I tried to explain it as simply as possible: You download my code - the entire package from GitHub. You download and install the specified version of Node.js. Then, you open the directory with my code and choose node.exe as the default program to run the .js file. After launching Dot2 and enabling the web remote, you run my code by double-clicking on the green icon. If you still have trouble with this, contact me through my Facebook page - I'll help you remotely.
@@virtualgamer2766 When it comes to button colors, you have two options. The first is, of course, the automatically generated color palette on page 5. Simply select your devices/device groups and save the corresponding color calls on executors in Dot2 on page 5. The second method - after saving the executor - change its name to the color name (my code recognizes the names of basic colors from the MA palette - remember that the case is important - lowercase or uppercase). For example, Fern Green, Red, or White. If my code recognizes the color name, the color on the MIDI controller will also change.
I also recommend disabling the Global Autofix option. Thanks to this, running executors on one page will not highlight on other pages. This way, you will have 5 pages of executors.
Yo tengo un problema mucho peor, ni siquiera lo pude ejecutar al cmd me da un error de version, no se si es porque tengo windows 10 pero no me funcion, ya escribi en facebook y aun no me responden, solo me dijeron que siga los pasos, lo hice pero aun asi no me funciona
Logré contactarlo en Facebook y ya está funcionando. Se descargó una versión anterior del código, que se generó para una versión anterior de nodejs, y se seleccionó akai en la configuración de salida midi.
En mi código, en la configuración del archivo que ejecutas, hay una variable llamada brightnes - puedes seleccionar cualquier nivel de brillo. Si estás usando otro programa para iluminar las teclas, debes enviar una nota en un canal MIDI más alto. Los primeros 5 o 6 corresponden a los niveles de brillo, luego vienen los efectos de parpadeo y otros.
Hello, yes - I've created such a solution for MA2 - it's available at this address: github.com/ArtGateOne/ma2apcmini Unfortunately, for MA3, there won't be such a solution - because the web remote in MA3 is a video stream. The only reasonable solution is OSC.
Tienes dos opciones: la página cinco tiene colores preasignados (paleta). También es posible cambiar el color de la tecla, si el Executor tiene un nombre de color asignado, por ejemplo, Rojo (Red), Verde (Green), Amarillo (Yellow).
@@elisadistefano3434 En el lado derecho del controlador MIDI, tienes botones que seleccionan las páginas, que van desde la página 1 hasta la página 5. He configurado la página 5 como ejemplo, en la que ya se muestran los colores definidos en mi código. En dot2 no existe un control de colores para los executors como en MA2. Por lo tanto, he encontrado una manera, y si cambias el nombre del executor por el nombre de un color, mi código leerá esos nombres y, si encuentra un nombre definido como "Orange" por ejemplo, enviará un código MIDI y el control cambiará de color. Para cambiar el nombre del executor, presiona "Label" y luego selecciona el executor y cambia el nombre a algún color. Recuerda que la cantidad de colores está limitada a la paleta MA y los nombres deben comenzar con mayúscula.
it would be possible to ensure that with the three buttons below those for selecting pages from 1 to 5 it would be possible to change between wing 0,1,2 or better yet to ensure that perhaps with the first one it would be possible to select the core fader page and bwing 1 , with the second button fwing1 and bwing 1 and with the third fwing 2 and bwing 2? sorry for my english
unfortunately no, because the faders are not motorized. this option is available in the bcf2000 version
@@KrzysztofKorzeniowski
but changing pages is the same thing, it could be convenient to have control of the entire console only with the APC MKII
@@Towmooo I understand what you want to achieve - but as I mentioned, it is not possible with the F-wing.
By default, I set it up so that the page switching only affects the B-wing, meaning the executors themselves - the faders always work on one page because they are not mechanical. In this case, I recommend disabling Global Auto Fix, because each executor page is available to you separately and does not display the active executors from other pages.
Of course, you can enable the page switching mode for both executors and faders, but in this case, you need to have the Auto Fix function enabled, because after switching the page for the fader, you need to lower it completely to deactivate the cue from the other page, and then you can control that cue on the current page.
Unfortunately, this Auto Fix option does not switch between F-wing 1 and F-wing 2, so it does not make sense at all.
My first code that I created for the APC had a functionality of switching between wings, but then I created something akin to virtual faders on the buttons. However, it was impractical and caused problems, so I will say it again - it is not possible to switch between wings during operation.
Of course, you could switch between B-wing 1 and B-wing 2, but since you have several pages, it is unnecessary as well.
You can always connect a second controller and use both simultaneously, which I also practice myself.
If you want to switch between F-wing 1 and F-wing 2, I recommend using the BCF2000 controller.
If, for example, you want to switch between B-wing 1 and B-wing 2, you can use my code for the Elgato Stream Deck! Moreover, the option of recognizing executor names used there has been utilized to display custom images, making it a very pleasant solution.
@@KrzysztofKorzeniowski Thank you very much for the more than exhaustive response. Indeed, I hadn’t considered some things. In any case, I want to compliment you on the work you’ve done and for responding to my comment despite the video being old.
Can you please make a step by step tutorial because I don’t get your Programm working. I really want to use it.
I tried to explain it as simply as possible:
You download my code - the entire package from GitHub.
You download and install the specified version of Node.js.
Then, you open the directory with my code and choose node.exe as the default program to run the .js file.
After launching Dot2 and enabling the web remote, you run my code by double-clicking on the green icon.
If you still have trouble with this, contact me through my Facebook page - I'll help you remotely.
Now it’s working, but I’m having a last question. What do I need to patch on your „colorpicker“ pad. Because I can’t get it to work.
@@virtualgamer2766 When it comes to button colors, you have two options.
The first is, of course, the automatically generated color palette on page 5. Simply select your devices/device groups and save the corresponding color calls on executors in Dot2 on page 5.
The second method - after saving the executor - change its name to the color name (my code recognizes the names of basic colors from the MA palette - remember that the case is important - lowercase or uppercase). For example, Fern Green, Red, or White.
If my code recognizes the color name, the color on the MIDI controller will also change.
And how do I get the executors to stop when I activate an other Color?
I also recommend disabling the Global Autofix option.
Thanks to this, running executors on one page will not highlight on other pages. This way, you will have 5 pages of executors.
Yo tengo un problema mucho peor, ni siquiera lo pude ejecutar al cmd me da un error de version, no se si es porque tengo windows 10
pero no me funcion, ya escribi en facebook y aun no me responden, solo me dijeron que siga los pasos, lo hice pero aun asi no me funciona
Logré contactarlo en Facebook y ya está funcionando.
Se descargó una versión anterior del código, que se generó para una versión anterior de nodejs, y se seleccionó akai en la configuración de salida midi.
Hola hermano sabes como puedo hacer que enciendan más los pads
Que tengan más brillo
En mi código, en la configuración del archivo que ejecutas, hay una variable llamada brightnes - puedes seleccionar cualquier nivel de brillo.
Si estás usando otro programa para iluminar las teclas, debes enviar una nota en un canal MIDI más alto. Los primeros 5 o 6 corresponden a los niveles de brillo, luego vienen los efectos de parpadeo y otros.
Hello, I have akai apc40 mk2, is there any possibility to work with dot2 on pc?
I'm very sorry - but I don't have access to such a controller so I can't help. Try Show Cocpit .
This is an APC Mini MK3. Will this work with Grandma2 or Grandma3?
Hello, yes - I've created such a solution for MA2 - it's available at this address: github.com/ArtGateOne/ma2apcmini
Unfortunately, for MA3, there won't be such a solution - because the web remote in MA3 is a video stream. The only reasonable solution is OSC.
Hola!!
Como hago para poner color a las teclas?
Tienes dos opciones: la página cinco tiene colores preasignados (paleta).
También es posible cambiar el color de la tecla, si el Executor tiene un nombre de color asignado, por ejemplo, Rojo (Red), Verde (Green), Amarillo (Yellow).
no entendi! no tendras un video como tutorial@@KrzysztofKorzeniowski
@@elisadistefano3434 En el lado derecho del controlador MIDI, tienes botones que seleccionan las páginas, que van desde la página 1 hasta la página 5.
He configurado la página 5 como ejemplo, en la que ya se muestran los colores definidos en mi código.
En dot2 no existe un control de colores para los executors como en MA2. Por lo tanto, he encontrado una manera, y si cambias el nombre del executor por el nombre de un color, mi código leerá esos nombres y, si encuentra un nombre definido como "Orange" por ejemplo, enviará un código MIDI y el control cambiará de color.
Para cambiar el nombre del executor, presiona "Label" y luego selecciona el executor y cambia el nombre a algún color. Recuerda que la cantidad de colores está limitada a la paleta MA y los nombres deben comenzar con mayúscula.
'Black', 'White', 'Red', 'Orange', 'Yellow', 'Fern Green', 'Green', 'Sea Green', 'Cyan', 'Lavender', 'Blue', 'Violet', 'Magenta', 'Pink', 'CTO', 'CTB', 'Grey', 'Deep Red'
Ok. muchas gracias amigo! lo voy a probar y despues te comento@@KrzysztofKorzeniowski