Careful when adjusting air levels lower than 50%. Lower levels will cause compressor to over cycle and possibly dump separator tank oil into your air filters.
Hi buddy what level are you talking about is that the air flow or air pressures? i experience blowing up the air filter/ separator. thank for your comment
@@noelrevil7623 Air Level. With this type of machine and size of the separator tank/compressor 50% air should be somewhere around 3 bar pressure. Anything lower than that will cause the compressor to over cycle and send hydraulic oil in the separator tank to go places it shouldn't.
Careful when adjusting air levels lower than 50%. Lower levels will cause compressor to over cycle and possibly dump separator tank oil into your air filters.
Hi buddy what level are you talking about is that the air flow or air pressures? i experience blowing up the air filter/ separator. thank for your comment
@@noelrevil7623 Air Level. With this type of machine and size of the separator tank/compressor 50% air should be somewhere around 3 bar pressure. Anything lower than that will cause the compressor to over cycle and send hydraulic oil in the separator tank to go places it shouldn't.
If the problem of oil getting dumped into your air intake persists look into replacing the "anti rumble valve".
Belo equipamento,e boa produtividade ela tem.
Sir sanvik dii 550 drill machine ka review
I am also drilling operter am also using power rock t 35 I have 10 year experience about of this machine so is there any opportunity for me plz
Like it
Hola desde panamá
Gostaria de saber se poderia traduzir pq sou brasileiro é sou sondador e quero te conhecimento
HOLE SIZE?
The rig will drill anything between 76mm-127mm, you can go larger, but it's not really designed for it.
Drill mining components
Drilling machine components