I have been a Contractor for what feels like 100 years. I have watched DIY shows and videos for ever and this is the best and most complete instructional video I have ever seen. Trade secret: those of us that are plumbers and electricians are prima donnas. We don't like to share everything so that people keep hiring us. Congratulations! You are the man! Great Job
A couple of pointers first I am a plumber and I do not recommend the copper compression system they have a greater chance of failure. For some reason the copper over time seems to lose its compression. It's rare but I have seen it. I dont know if it's because copper is a soft metal etc or how its installed. I've had to open up a few walls to find it leaking. I normally cut the copper ring and replace it with a stainless viega style compression. The stainless ring seems to works better. I really prefer uponor system but that's another thing entirely. Secondly I would of siliconed around the tube spout nipple, screws for the wand, wand water supply and even the shower spout. Especially the tub spout nipple for some reason I have found water follow the spout back and leak into the wall. Again it's rare but when I install it I dont want to chance a call back. Really good work I enjoyed the video.
Jeff your channel is great! Im 23 and bought my first home which is a fixxer upper. Your videos have saved, and are going to save me thousands! My father is a retired contractor of 30 years so he is a big help, but he doesnt touch plumbing! Lol. You have made my life so much easier. Detailed and easy to follow instructions. Hope to see you on HGTV one day!
My 10 year old daughter compared you to Bob Ross because your so calm, positive and encouraging! (She's been watching with us for researching our bathroom redo). Thank you for sharing your knowledge :)
A 10-year old that knows who Bob Ross is in this day and age... Now that is encouraging to know that kids are getting good role models and appreciate art.
@@hyperflexharrington5 Fortunately, Bob Ross has been immortalized on the internet. Everyone knows who he is at this point, even if they were born after he died
As a professional red seal plumber and contrary to some things ive seen on your other videos you did a good job on the plumbing by actually soldering and using crimp adapters. Thats the best way for homeowners and contractors to do it. Have you seen the pex by copper stub outs for sinks and toilets? They work great for a tub spout if you wanna save soldering in the wall and want a quick and easy way to mount a slip fit tub spout. Used one in my friends cabin and it worked great
I just paused this to comment. I have a good deal of DIY experience, and usually, I research the crap out of things before I do them. I am disappointed that RUclips didn't start sooner and also that you hadn't come into view until recently. I like your approach and since I am not at it everyday you best me on ideas and ways to do things lol. But really thanks man, I know your job is hard enough and long enough without talking to the camera all the time. We really appreciate your efforts and keep it up! I really like the combination vids like shower instal methods. It is really good to have all things in one. What I would recommend is grouping together similar issues. Like Bsmt waterproofing, flooring, exterior finishes, driveways etc. You give good content and I think people would like to know the good better best as you present it. Oh I loved the sound proofing too.
Thanks for supporting our channel by using our Amazon link amzn.to/2ySCGMO. If you can't find plumbing fixtures you are looking for then please visit any Fergusons or Wolseley or other plumbing wholesale suppliers. Avoid the box stores at all cost . they do not sell pex ready plumbing as yet! Cheers!
We just did our bathroom and we used a 6 way diverter with a separate temp adjusting mixing valve. We used all Pex: shower head, tub spout, wand. The brand we used was delta for the valves. Interestingly delta said their 6 way valve is not designed for a tub spout as one of the legs but we went ahead and did it anyway. It works great. I would say that we used Pex A instead of B as Pex A has expansion fittings. Therefore when you make connections, the inner diameter isn’t made smaller by the fitting so it should help with potential pressure issues. The fittings with Pex B are also what cause that dribbling from the shower head when installing a system with a tub spout diverter. Great video. Awesome way to install a shower system.
you can use pex a with a crimp if it has the proper certification. I know uponor aquapex meets the certification for using crimp as well as expansion. You cannot however use this shower kit with the expander, as the diameter of the fitting isn't large enough, and does not meet the requirements.
Jeff, all of your videos and your knowledge is top notch! You are one of the reasons I have saved so much money in labor on my house flips. I am 25 and continue to advance my skills in every trade. I appreciate all of your tips and experience. Thank you sir!
Good video Jeff. Very informative .I forwarded this video and some of your other pex and shower videos to my brother-in-law. He wants two remodel his bathroom by himself. I told him good for you..... if you get in trouble call me. I have used a couple different brands of tub spouts and trim kits from Europe. The trim plate has a backing with a gasket like yours. But the tub spout also had a silicone gasket and o-ring as well. When I use a regular plastic or metal threading in the tub spout I lay a thick bead of clear silicone caulk on the inside just a 1/16 inside the back rim of the spout. Let it dry until the next, day, maybe two. Then i use clear silicone caulk and run a bead of caulk onto the caulk outside shoulder that I had put in the day before. I embed a large o-ring sized to fit into the new caulk, tighten up the spout and then I have a water tight seal. I’ve done this dozens of times and have yet to have water get behind the spout and leak into the wall. It takes a bit of planning and your need the correct size o-ring but it works pretty good. Hope my explanation was not too confusing! Ron
I wish HGTV would hire you to do a show.. you've got the personality and know-how that would be kick butt!....My Wife and I just bought our first house and its a fixer upper! You are the BEST! Thanks so mush for taking the time to explain everything! Keep up the good work!
I am just about to close up my wall on my shower project and now have to rethink how deep my drop ear is relative to the studs. I imagine that there are multiple lengths of pipe nipples available so if mounted too deep you could solve that issue with a longer pipe nipple but if it protrudes out too far then it would be a bigger issue. Glad I watched and learned (a few) things.
Awesome job. Was wondering if you have links for the products you used, most importantly the complete riobel kit your used. Also the waterproofing as well.
Just a public service announcement. Do not use pex from the mixer to the tub spout. The inside diameter of the barb, or sharkbite fittings is 3/8" and will restrict the flow of water enough that the shower head will drip while filling the tub. It doesn't sound like a problem to some but the drips will hit the tub spout and splash onto the floor. Plus a dripping shower head is not correct. To correctly install use copper pipe from the mixer to the drop ear and from the drop ear to the tub spout. If you don't want to solder copper you can use sharkbite and REMOVE the white plastic insert. You do not need this insert if you're using copper or cpvc. I am a new home owner and just remodeled my bathroom following this video series and it turned out great except for the dripping shower head. It caused me a lot of headaches but after reading several forums I ran copper with true 1/2" inside diameter fittings from the mixer to the tub spout and it's now working correctly.
Jeff, why is it that, every time I watch one of your videos, I always feel like I've known you all my life, and we've barbecued, fished, and drank beer together on numerous occasions? Have you ever been to Fairbanks, AK?
Aren’t lasers just so great & helpful for many projects(tile, cabinets, framing, electric work, etc etc etc...); think about the "good ole days" when lasers weren’t being used in construction work😰, boy do I love progress & technology 😍 Absolutely love the look & build of this bathroom/shower remodel. Looks clean, simple, & modern....just beautiful! Looking forward to your next new project. Cheers👍🏻
Gosh your videos are so well done for us DIY and as you stated a lot of videos are made to scare us DIY folks into calling a contractor who over charges and at that even if they even bother to show up...thanks so much!
Each 90 elbow is equivalent to 9 ft of pipe friction. That being said, you are correct. The modern valves are ridiculously restricted and with most homes with 30 to 50 lbs of water pressure this friction will not amount to a hill of beans!
Great channel! Got me super motivated. Your videos are thorough and common "sensical". Where can I purchase the Riobel kit you installed in this video? Its exactly what I would need in my bathroom. Also, which parts not included in the kit would I need? I would only need a two way system.
I'm a newbie to your channel and goodness sakes am I ever glad I found your site. I have learned so much and am still learning. This was a great tutorial. Thank you so much for your hard work and the time you spend creating these lessons. I watched your lesson on drywall and I was amazed watching you work as you tried to complete the install in 5 hours. The weather let you down but to me I would have bought your round of golf ... because you sure deserved it!😀✌
You make it look easy enough for me to do and I haven't done any plumbing or remodeling. That has always been my husband's cup of tea. Question: We are about to remodel our bathroom. We are getting rid of the tub and putting in a tiled shower with handicap access. We can't make the window smaller or remove it all together (that gets into repairing and re-siding a 1960's house with original painted Masonite siding. That comes at a later date). So about 3 inches of the window will be in the back of the shower. We will be replacing the wood window with a vinyl one. But how do we make it waterproof?
Keep it sexy buddy! I like your videos - they actually show how to do the projects start to end without glossing over steps or having things magically work out - you keep it real and mention things that may go wrong and how it avoid or correct them. Plus you're a fellow Canadian so that makes you awesome AND I know I can definitely get the products you use here in Ontario. Keep up the great videos!
Another great video, I really look forward each one. I agree that PEX is awesome to replace copper, I've used it for several of our rental remodels. So much easier and more flexible to install in older properties where you don't have the advantage of perfect access. I've also found your videos on drywall to be very helpful. Thanks for doing these.
I'm looking to do a master bathroom shower, bathtub renovation. I know I can't do the work myself, but by watching your videos, it let's me know what questions to ask and if the people I hire, know what they're talking about.
In my framing days I would tack backing to the nearest stud to spare the plumber the chore. Reasoning being that they wouldn't be asking to borrow my saw. Plus it is nice to be nice
Its more like higher expectations since his son is...well, *his* son. When you are seen a proffesional worldwide and people say you know what you are doing, its puts alot more expectations on your kids if they decide to join you. Jeff also has more expirience than his son who is younger and has his dad to teach him so he can afford to make more mistakes. He sounds like a really good man and father but maybe he does expect more from his son than he probably should (as do many others honestly).
Don't know about your valve but the ones I've installed require copper on the tub spout because the pex fittings are just a bit smaller than 1/2'' required and so the water comes out the shower at the same time as the tub. I learned this the hard way. Check the manufacture specifications.
@@HomeRenoVisionDIY what is the model of the shower fixture set you used? I love the look and install simplicity. Ant help would be great. Awesome channel by the way.
A trick I like with pex is if you are having trouble getting everything in place the ring where it needs to be, keeping it there, and getting the crimper in there. You can, by hand, make the ring slightly oval shaped which will hold it n place while you get the crimper in.
I would advise you not to loop your pex I am a licensed plumbing contractor in south Carolina. With 26 years experience, the one down side to looping is it puts stress on the pipes and will cause it to leak down the road the best way to run pex is to use elbows. For one it takes the stress off the pipe and it looks more professional now this is my personal opinion and just that but what do you think the customer would rather see someone who took the time to make things look nice and neat ir someone who took the easy way
Jeff you really know how to lay some pipe! Please note out of respect for your one sensitive viewer I did not characterize your pipe laying as sexy. Great video!
Great video. I gotta tell you, I got a good laugh outta hearing you thump your melon on the shower head pipe when you mentioned a viewer saying you shouldn't say the word "SEXY." LMAO. Seriously though, loved the video
Very Helpful video. Thanks for taking the time to explain each step. I am about to renovate my bath and this is all I need to get the job done. Thanks again.
Have been watching your videos and have successfully plumbed an addon basement bathroom and replumbed quite a few other lines in my home. Really appreciate your great videos. Many thanks! Next I learn drywall!!
Hi Jeff. This is a pretty old video but I'm just watching it now. I'm not sure if it was already asked in the comments, if it has, I apologize. I'm wondering where you got the three way valve. I've looked around online and all I seem to find are for copper. I can't seem to find one that is all pex.
Thanks for the videos helped me a ton many times but I’m concerned about your breathing seems shallow and unnatural might want to see a doc just Incase! Us diyers need ya around lol
Jeff...first, a million thanks for sharing your vast knowledge in a comprehensive and clear manner. A true master teacher. Do you have a link to the system you installed for purchase?
Hi there! I recently came across your channel while searching plumbing videos, it was the one with you and your son replacing a water heater. I just wanted to say thank you for sharing your knowledge! As my Journeyman says, plumbing IS sexy and there's no shame in saying that 😊
Hey I watched you tile that restroom on another video. Am doing new plumbing and tilting a walk in shower haven't done this work like in 10 years so am a little rusty but found your video and it all came back to me.
Thanks for all you do for us in your videos! You are our family’s go to for all DIY projects. What are your thoughts on shark bite fittings behind a tiled shower wall? We changed the shower fittings during our shower remodel, and we used shark bite fittings. This was before I saw this video. Would you recommend redoing it so we don’t have a hidden shark bite connectors? Thanks for your time and expertise!
You are lagging behind. Just did this last week 😄 I watched the whole video anyway. Very well done as always! Reality programming without the fake drama 😂
I did remodels for a few years, but whenever I take on a new project in my house, which is 100 years old, so there's a lot to do, I check to see if you have done a video on it, extremely helpful.
I can’t make out what the name of the 3 way valve in shower renovation. What brand is it as well as the shower head and hose type. Thanks! Love this site
I have been a Contractor for what feels like 100 years. I have watched DIY shows and videos for ever and this is the best and most complete instructional video I have ever seen. Trade secret: those of us that are plumbers and electricians are prima donnas. We don't like to share everything so that people keep hiring us. Congratulations! You are the man! Great Job
A couple of pointers first I am a plumber and I do not recommend the copper compression system they have a greater chance of failure. For some reason the copper over time seems to lose its compression. It's rare but I have seen it. I dont know if it's because copper is a soft metal etc or how its installed. I've had to open up a few walls to find it leaking. I normally cut the copper ring and replace it with a stainless viega style compression. The stainless ring seems to works better. I really prefer uponor system but that's another thing entirely. Secondly I would of siliconed around the tube spout nipple, screws for the wand, wand water supply and even the shower spout. Especially the tub spout nipple for some reason I have found water follow the spout back and leak into the wall. Again it's rare but when I install it I dont want to chance a call back. Really good work I enjoyed the video.
Jeff your channel is great! Im 23 and bought my first home which is a fixxer upper. Your videos have saved, and are going to save me thousands! My father is a retired contractor of 30 years so he is a big help, but he doesnt touch plumbing! Lol. You have made my life so much easier. Detailed and easy to follow instructions. Hope to see you on HGTV one day!
My 10 year old daughter compared you to Bob Ross because your so calm, positive and encouraging! (She's been watching with us for researching our bathroom redo). Thank you for sharing your knowledge :)
A 10-year old that knows who Bob Ross is in this day and age... Now that is encouraging to know that kids are getting good role models and appreciate art.
@@hyperflexharrington5 Fortunately, Bob Ross has been immortalized on the internet. Everyone knows who he is at this point, even if they were born after he died
As a professional red seal plumber and contrary to some things ive seen on your other videos you did a good job on the plumbing by actually soldering and using crimp adapters. Thats the best way for homeowners and contractors to do it. Have you seen the pex by copper stub outs for sinks and toilets? They work great for a tub spout if you wanna save soldering in the wall and want a quick and easy way to mount a slip fit tub spout. Used one in my friends cabin and it worked great
I just paused this to comment. I have a good deal of DIY experience, and usually, I research the crap out of things before I do them. I am disappointed that RUclips didn't start sooner and also that you hadn't come into view until recently.
I like your approach and since I am not at it everyday you best me on ideas and ways to do things lol.
But really thanks man, I know your job is hard enough and long enough without talking to the camera all the time. We really appreciate your efforts and keep it up! I really like the combination vids like shower instal methods. It is really good to have all things in one.
What I would recommend is grouping together similar issues. Like Bsmt waterproofing, flooring, exterior finishes, driveways etc. You give good content and I think people would like to know the good better best as you present it. Oh I loved the sound proofing too.
Thanks GTA we are always working on making better content. cheers!
I’ve been in the trades for 36 years, I am always impressed with your videos, keep up the good work
He's no Mike Holmes but his videos are great!
Love it thank you so much. I am a sixty five year old woman. Your video made a lot of the anxiety out of adding a new bath in my daughter's basement
Thanks for supporting our channel by using our Amazon link amzn.to/2ySCGMO. If you can't find plumbing fixtures you are looking for then please visit any Fergusons or Wolseley or other plumbing wholesale suppliers. Avoid the box stores at all cost . they do not sell pex ready plumbing as yet! Cheers!
Matt Risinger did a 14,000 PSI test on how much pressure it would take to bust a fitting off.
fitting never came off the pipe failed first.
I need to see that.
@@ImTrans-Former Go ahead and test it...done exactly the same and pipes went boom but not the fittings
We just did our bathroom and we used a 6 way diverter with a separate temp adjusting mixing valve. We used all Pex: shower head, tub spout, wand. The brand we used was delta for the valves. Interestingly delta said their 6 way valve is not designed for a tub spout as one of the legs but we went ahead and did it anyway. It works great. I would say that we used Pex A instead of B as Pex A has expansion fittings. Therefore when you make connections, the inner diameter isn’t made smaller by the fitting so it should help with potential pressure issues. The fittings with Pex B are also what cause that dribbling from the shower head when installing a system with a tub spout diverter. Great video. Awesome way to install a shower system.
very cool. the valve i used has a positive stop so you can use pex b as shown and have no issue with the tub spout. Cheers!
you can use pex a with a crimp if it has the proper certification. I know uponor aquapex meets the certification for using crimp as well as expansion. You cannot however use this shower kit with the expander, as the diameter of the fitting isn't large enough, and does not meet the requirements.
correct. the fitting has to be copper ring at the valve.
Jeff, all of your videos and your knowledge is top notch! You are one of the reasons I have saved so much money in labor on my house flips. I am 25 and continue to advance my skills in every trade. I appreciate all of your tips and experience. Thank you sir!
Glad to share my experience. Cheers!
You are the most rounded general builder on RUclips. Great vid as always. Cheers
Thanks, we try to be practical. Cheers!
Where do you buy that shower kit or the 3 way diverter / mixer?
Thank you Jeff. You just saved me thousands of dollars. God bless you.
Absolutely love the Copper to Pex idea. I would have never known how to do this without your videos.
glad to help!
Remodeling an old house which I was born in. Your videos really inspire me. Thanks great videos.
I'm a pipe fitter in Ky and I love all your video's! I love all the tile ones! I've Learned sooooooo much!
Good video Jeff. Very informative .I forwarded this video and some of your other pex and shower videos to my brother-in-law. He wants two remodel his bathroom by himself. I told him good for you..... if you get in trouble call me.
I have used a couple different brands of tub spouts and trim kits from Europe. The trim plate has a backing with a gasket like yours. But the tub spout also had a silicone gasket and o-ring as well.
When I use a regular plastic or metal threading in the tub spout I lay a thick bead of clear silicone caulk on the inside just a 1/16 inside the back rim of the spout. Let it dry until the next, day, maybe two. Then i use clear silicone caulk and run a bead of caulk onto the caulk outside shoulder that I had put in the day before. I embed a large o-ring sized to fit into the new caulk, tighten up the spout and then I have a water tight seal. I’ve done this dozens of times and have yet to have water get behind the spout and leak into the wall. It takes a bit of planning and your need the correct size o-ring but it works pretty good. Hope my explanation was not too confusing!
Ron
I wish HGTV would hire you to do a show.. you've got the personality and know-how that would be kick butt!....My Wife and I just bought our first house and its a fixer upper! You are the BEST! Thanks so mush for taking the time to explain everything! Keep up the good work!
No Thanks, then |i would be a talking head like every other actor on there. Cheers!
Love it. We did our kids bathroom in 16. Our shower fixture is also riobel. We made the right choice.
Another request for the name/model of that shower head system... my wife will love it. Learning and re-learning so much with these vids... thanks!
I'm a new homeowner and this channel is gold! Thank you so very much Jeff - I'm very grateful.
Getting ready to change my tub to a walk in shower. I have always done copper, but going with the pex system this time. Great info!
I am just about to close up my wall on my shower project and now have to rethink how deep my drop ear is relative to the studs. I imagine that there are multiple lengths of pipe nipples available so if mounted too deep you could solve that issue with a longer pipe nipple but if it protrudes out too far then it would be a bigger issue. Glad I watched and learned (a few) things.
Awesome job. Was wondering if you have links for the products you used, most importantly the complete riobel kit your used. Also the waterproofing as well.
Just a public service announcement. Do not use pex from the mixer to the tub spout. The inside diameter of the barb, or sharkbite fittings is 3/8" and will restrict the flow of water enough that the shower head will drip while filling the tub. It doesn't sound like a problem to some but the drips will hit the tub spout and splash onto the floor. Plus a dripping shower head is not correct. To correctly install use copper pipe from the mixer to the drop ear and from the drop ear to the tub spout. If you don't want to solder copper you can use sharkbite and REMOVE the white plastic insert. You do not need this insert if you're using copper or cpvc. I am a new home owner and just remodeled my bathroom following this video series and it turned out great except for the dripping shower head. It caused me a lot of headaches but after reading several forums I ran copper with true 1/2" inside diameter fittings from the mixer to the tub spout and it's now working correctly.
Hi Jeff, thank you for sharing.
Keep up the good work.
Greetings from France 🇫🇷.
I had one of those installed when I was living in Egypt 🇪🇬. I loved it.
Jeff, why is it that, every time I watch one of your videos, I always feel like I've known you all my life, and we've barbecued, fished, and drank beer together on numerous occasions?
Have you ever been to Fairbanks, AK?
Not yet, but sounds like my kind of fun. Cheers!
Aren’t lasers just so great & helpful for many projects(tile, cabinets, framing, electric work, etc etc etc...); think about the "good ole days" when lasers weren’t being used in construction work😰, boy do I love progress & technology 😍
Absolutely love the look & build of this bathroom/shower remodel. Looks clean, simple, & modern....just beautiful!
Looking forward to your next new project. Cheers👍🏻
Thanks dude, not bad for cheap home depot tile. Cheers!
Awesome channel!!!! I have watched "This old house" and other HGTV shows and your channel is on par and better than most.
Gosh your videos are so well done for us DIY and as you stated a lot of videos are made to scare us DIY folks into calling a contractor who over charges and at that even if they even bother to show up...thanks so much!
Literally looking for this exact same setup. Can you tell me where to find? Love the channel.
Yeah, me too. He said roibel pro, but can't seem to find the set. I want to do full oex setup
Ready to do my bathroom and you have given me the confidence of trying yo go diy. That and the 10k quote a contractor gave me.
Great video with lots of tips. My favorite is how to make sure you're not cross treading the treads.
That trick will save you a lifetime of aggravation. Cheers!
I could watch these videos all day!
Wow. Thank you for step by step tutorial. Love this site
Thank you Sheila, glad to help! Cheers|!
Each 90 elbow is equivalent to 9 ft of pipe friction. That being said, you are correct. The modern valves are ridiculously restricted and with most homes with 30 to 50 lbs of water pressure this friction will not amount to a hill of beans!
Jeff, these videos are great, keep up the good work. Thank you for down to earth explanations and long format.
plumbing a valve can't be taught in 5 minutes, that is for sure. cheers!
Great video!!. Do they provide a complete kit for the shower fixtures installed?
Great channel! Got me super motivated. Your videos are thorough and common "sensical".
Where can I purchase the Riobel kit you installed in this video? Its exactly what I would need in my bathroom. Also, which parts not included in the kit would I need? I would only need a two way system.
best to talk to the counter sales guy at your local fergusons or wolseley plumbing outlet. Cheers!
I'm a newbie to your channel and goodness sakes am I ever glad I found your site. I have learned so much and am still learning. This was a great tutorial. Thank you so much for your hard work and the time you spend creating these lessons. I watched your lesson on drywall and I was amazed watching you work as you tried to complete the install in 5 hours. The weather let you down but to me I would have bought your round of golf ... because you sure deserved it!😀✌
I’m so glad to have found your channel! 😊
Thank you. Cheers Christina!
You make it look easy enough for me to do and I haven't done any plumbing or remodeling. That has always been my husband's cup of tea.
Question: We are about to remodel our bathroom. We are getting rid of the tub and putting in a tiled shower with handicap access. We can't make the window smaller or remove it all together (that gets into repairing and re-siding a 1960's house with original painted Masonite siding. That comes at a later date). So about 3 inches of the window will be in the back of the shower. We will be replacing the wood window with a vinyl one. But how do we make it waterproof?
use kerdi membrane to wrap around the frame right up to the vinyl. Use kerdi fix to seal the membrane to the window. and tile. Cheers!
Keep it sexy buddy! I like your videos - they actually show how to do the projects start to end without glossing over steps or having things magically work out - you keep it real and mention things that may go wrong and how it avoid or correct them. Plus you're a fellow Canadian so that makes you awesome AND I know I can definitely get the products you use here in Ontario. Keep up the great videos!
Thanks Bob glad to be helpful. Cheers!
These videos are a life saver...I am finishing my basement and have been huge help!!!
Another great video, I really look forward each one. I agree that PEX is awesome to replace copper, I've used it for several of our rental remodels. So much easier and more flexible to install in older properties where you don't have the advantage of perfect access. I've also found your videos on drywall to be very helpful. Thanks for doing these.
Cheers brian, glad to help!
I'm looking to do a master bathroom shower, bathtub renovation. I know I can't do the work myself, but by watching your videos, it let's me know what questions to ask and if the people I hire, know what they're talking about.
“Ask your comments in the questions below “ LOL
45:07
my tongue got in the way of my brain.
My wife caught that. LMBO
@@HomeRenoVisionDIY It happens... at 0:02 you almost sound like you're drunk! haha
You are amazing! Best tutorial video out there!!! You need your own HGTV show!
Fantastic. If only every installation was that simple
If you know the end form the beginning it usually is. Cheers!
What is the end was not formed properly?
Great fan of your work, and your no-nonsense approach to construction methodologies. Thank you.
Thank you and Cheers!
Why didn't you just take off the copper tube to the shower when you had the drywall off?
In my framing days I would tack backing to the nearest stud to spare the plumber the chore. Reasoning being that they wouldn't be asking to borrow my saw. Plus it is nice to be nice
Addicted to these vids. Don’t feel confident to do any of this myself though!! 😂
I like that style of tub/shower valve. Great installation.
loving the 3 way!Cheers!
Go easy on your boy. He seems like he's got his act together for the most part.
Its more like higher expectations since his son is...well, *his* son.
When you are seen a proffesional worldwide and people say you know what you are doing, its puts alot more expectations on your kids if they decide to join you.
Jeff also has more expirience than his son who is younger and has his dad to teach him so he can afford to make more mistakes. He sounds like a really good man and father but maybe he does expect more from his son than he probably should (as do many others honestly).
You need to replace the dull cutting wheel. I use the compact tubing cutter for refrigeration tubing and pipe. Great video!
Don't know about your valve but the ones I've installed require copper on the tub spout because the pex fittings are just a bit smaller than 1/2'' required and so the water comes out the shower at the same time as the tub. I learned this the hard way. Check the manufacture specifications.
Hi Don, this valve has a positive stop position for the tub and does not need a mechanical diverter so that problem does not exist.. Cheers!
@@HomeRenoVisionDIY what is the model of the shower fixture set you used? I love the look and install simplicity. Ant help would be great. Awesome channel by the way.
I just learned everything I needed from this guy ❤ why couldn't I have him for my school teacher in middle school 😢
"...won't ever fail"
Famous last words
A trick I like with pex is if you are having trouble getting everything in place the ring where it needs to be, keeping it there, and getting the crimper in there. You can, by hand, make the ring slightly oval shaped which will hold it n place while you get the crimper in.
I have started doing this recently. cheers works like a charm.
Great idea. thanks!
I would advise you not to loop your pex I am a licensed plumbing contractor in south Carolina. With 26 years experience, the one down side to looping is it puts stress on the pipes and will cause it to leak down the road the best way to run pex is to use elbows. For one it takes the stress off the pipe and it looks more professional now this is my personal opinion and just that but what do you think the customer would rather see someone who took the time to make things look nice and neat ir someone who took the easy way
Very informative and detailed. Good camera placement which not all presenters do.
Jeff you really know how to lay some pipe! Please note out of respect for your one sensitive viewer I did not characterize your pipe laying as sexy.
Great video!
LOL< not sure what to say to that but thanks for the laugh!
Excellent and very thorough install video. Your original PEX shower video inspired me to do my own basement bathroom.
glad to help inspire. Cheers!
Great video. I gotta tell you, I got a good laugh outta hearing you thump your melon on the shower head pipe when you mentioned a viewer saying you shouldn't say the word "SEXY." LMAO. Seriously though, loved the video
Very Helpful video. Thanks for taking the time to explain each step. I am about to renovate my bath and this is all I need to get the job done. Thanks again.
As Austin Powers might say "Yeah, Pexy Baby..Yeah"
Oh Behave!
Haha
This guy's great teacher.
Thank you very kindly. Cheers!
When I first read the title to the video I didn’t have my glasses on and I thought it said The Ultimate Sex Power. 😆😝🤣😂😆😝 I thought OMGosh Jeff!!!!
depending on how much you love the shower it could be correct as well. Cheers!
XD
I was about to comment this lol. But then the Ultimate Sex Shower
Have been watching your videos and have successfully plumbed an addon basement bathroom and replumbed quite a few other lines in my home. Really appreciate your great videos. Many thanks! Next I learn drywall!!
Thanks Eric, glad to help. I trust you will enjoy the drywall series we have. cheers!
Hey I've seen you in that tub too many times. Lol.
I love my mirolin tubs. Cheers!
Hi Jeff. This is a pretty old video but I'm just watching it now. I'm not sure if it was already asked in the comments, if it has, I apologize. I'm wondering where you got the three way valve. I've looked around online and all I seem to find are for copper. I can't seem to find one that is all pex.
Thanks for the videos helped me a ton many times but I’m concerned about your breathing seems shallow and unnatural might want to see a doc just Incase! Us diyers need ya around lol
no worries, getting a cardio workout and feeling better.
Jeff...first, a million thanks for sharing your vast knowledge in a comprehensive and clear manner. A true master teacher.
Do you have a link to the system you installed for purchase?
That's a sexy looking shower! LOL
SEXY!!!!!
You sir are a professional,,Very nice explanation,,It is appreciated!
Sexy, Sexy, Sexy 💃
There, I'll say it!👊
You’re a very good teacher..
Sexy,sexy,sexy!
Loving it! Cheers!
Hi there! I recently came across your channel while searching plumbing videos, it was the one with you and your son replacing a water heater. I just wanted to say thank you for sharing your knowledge! As my Journeyman says, plumbing IS sexy and there's no shame in saying that 😊
Hey I watched you tile that restroom on another video. Am doing new plumbing and tilting a walk in shower haven't done this work like in 10 years so am a little rusty but found your video and it all came back to me.
Thanks for all you do for us in your videos! You are our family’s go to for all DIY projects.
What are your thoughts on shark bite fittings behind a tiled shower wall? We changed the shower fittings during our shower remodel, and we used shark bite fittings. This was before I saw this video. Would you recommend redoing it so we don’t have a hidden shark bite connectors?
Thanks for your time and expertise!
Enjoyed the video and I learned quite a bit more from it. Keep those videos coming.
You are lagging behind. Just did this last week 😄 I watched the whole video anyway. Very well done as always! Reality programming without the fake drama 😂
sorry to let you down. Cheers!
I did remodels for a few years, but whenever I take on a new project in my house, which is 100 years old, so there's a lot to do, I check to see if you have done a video on it, extremely helpful.
Great video! Where can I find the 3-way shower system you used?
Very nicely explained!
Have you ever done a video on installing a bathroom from scratch upstairs above a existing bathroom?
not yet. just renos!
Pex is such a cool technology.
Agree with Neil!! You are the Bob Ross of DIY!. Thanks for the relaxing approach!
Nice video my friend. I remember back around 1991, with my first computer, I was afraid to even install a dual up modem.
From one contractor to another Good job 👍🏻
cHEERS JERRY!
Those fixture trim details are sexy. Looks like a well designed system. I hope I'll find something like this in the states
I can’t make out what the name of the 3 way valve in shower renovation. What brand is it as well as the shower head and hose type. Thanks! Love this site
ever figure this out??
Your videos make it look very easy. Thanks.
Glad to help. and it is easy if you know the steps before you start. Cheers!
Great instructional video. Thank you for being direct and to the point.
Great teaching job. Appreciate your videos.
Should you pressurize the PEX system prior to installing drywall to make sure there is no leaks?
This stuff looks way easy to install. Love the vid!