Это видео недоступно.
Сожалеем об этом.
LEGO Mech Frame[How to Build]
HTML-код
- Опубликовано: 17 фев 2023
- フル可動レゴロボフレームの作り方です。
前回紹介したレゴロボヘッドを装着できます。
動画の最後にこのフレームを用いた作例も紹介しているので皆さんもぜひ自分だけのロボづくりにチャレンジしてみてください。
0:08 Step 1 Body
1:16 Step 2 Arm
3:05 Step 3 Leg
ロボヘッドの作り方は以下をご覧ください。
LEGO Mech Heads[How to Build]
• LEGO Mech Heads[How to...
7:22 example
Twitter
/ legodoumoko
Instagram
/ moko_bricks
↓Playlist↓
CUBE-ROBO series
• LEGO CUBE-ROBO series
Transform Mech
• LEGO Transform Mech
Mech galleries
• LEGO Mech galleries
How to Build
• LEGO How To Build
#LEGO #LEGOmech #MOC
__________________________________
当動画にて公開している作品の作り方のご利用はあくまで個人が創作をするためのものとし、これを無許可で商用利用(改変含む)することや組立図として配布するなどといった二次利用はご遠慮ください。
良識の範囲内でのご利用をお願いします。
The use of how to make the work shown in this video is for personal creation only, and refrain from secondary use such as commercial use (including modification) or distribution as an assembly drawing without permission.
Please use within the bounds of good sense.
________________________________
※無断転載禁止/未授权转载禁止/Do not repost.
Music
Bright Sun
dova-s.jp/bgm/play12822.html
I've always loved the idea that a single frame unit could be armored up thus giving you "different" mechs that you could use. And to know that some of your older mechs used this type of frame reinforces that idea; a modular design that can have it's armor parts easily swapped out depending on the situation.
I really appreciate that you avoid mixel joints for this build. Makes it a little more approachable to copy this design, and I guess that’s what you were going for. Thanks.
On a side note, these examples are absolutely stunning, beautiful, this is art.
whats wrong with mixel joints?
このフレームと「Eagle」等のKMFみたいなロボットが好みで、自分なりに再現してアレンジなどして色々作っています
I think i was able to reverse engineer ur larger frame for the blue samurai mecha a couple years back and i always thought that frame was based on one similar to this so this is pretty interesting to watch from hindsight
I was so unconvinced through the entire video, and then you put in the examples and my jaw literally dropped.
And here I thought I was approaching mastery. Oh, hubris!
2016年頃からのMFSですか、あまりのカッコ良さに痺れてブログ漁ってたなぁ
ロボ娘やアイマス系女子もですが、公式造ってるのホント凄い
ありがとうございます〜!
わりと古いフレームなのですがそんなにも前から見ていただけて嬉しいです
This is such a wonderful frame, I might just have to use this one myself. Thanks, Moko!
Thank you so much for your continuous work. I absolutely adore your Designs
I can actually see how all of your wonderful mechs have been built! Fantastic video!
thank you! I hope this helps your build.
@@MokoBrickLaboratorychannel I luv the two mechs at the end of the video bc that look awesome
@@MokoBrickLaboratorychannel plzz do more of those mechs
I'm speechless, this is amazing! Thanks for sharing your wonderful techniques.
Awesome!
this is very helpfull, thank you
Awesome build, this is definitely helpfull, thank you!
If this was a lego ideas set, I would buy it.
늦가을님 보고왔는데 겁나 잘만드시네요 ㄷㄷ
Octopus has always been my favorite lol
한국의 Utuber 방송에 출연하신것을 보고 찾아왔습니다. 그전에도 Instagram을 통해 당신의 작품을 본적이 있습니다. 저는 창작자는 아니지만 창작 해보고 싶다는 생각이 들었고 특히 마블을 좋아해서 헐크 피규어사이즈의 헐크버스터를 만든것을 보고 감동했습니다. 더욱이 방송에서 조립법을 공유해주어 기분이 너무 좋습니다. 따라 만들어 보고 싶습니다. 행복한 취미생활을 위해 항상 건강하시길 바라겠습니다. 일본에 몇 번 가본적이 있는데 또 가보고 싶네요^^
man i cant wait to get this one rolling
I just discovered your channel thanks to a post from Chubbybots, your creations look amazing! this gave me some ideas
I subscribe
a French viewer
ありがたい…。
いえいえ、お役に立てれば幸いです!
Thanks for showing us, but sometimes it is very hard to see what pieces you used before you start building with them.
We don't use unusual parts in the frame, so you should be able to find the parts you need easily.
If you don't understand something, just ask me and I can answer.
진짜 멋있어요
thanks!
Chubby sent me! Subbed!
他のMFSにあるようなバックパックの作り方も知りたいです。
あと好きです。参考になります。
いつもありがとうございます。
ありがとうございます。
残念ながら作り方はフレームのみなのでそこからどう発展させるかは各々のビルダーに任せる形をとらせていただいております。
悪しからずご了承ください。
You can make gundam unicorn
Do you think an EVA-esque mech would work with this frame? I've been thinking of making a physical version of the mecha I came up with I just probably started off the wrong way and have left it unfinished since...
デフォルメ作品とかにも使えそうですね〜
ちょっと古いですが、グランゾートとかあのあたりのデフォルメ具合意識して作ってあるのでまさにデフォルメロボ向きのフレームですね!
@@MokoBrickLaboratorychannel
なるほど
けっこう可動が優秀なので変形なんかの幅が広くて良いですね!
この規格で合体モノも作れると楽しそう。。。
変形ものは過去にいくつか作りましたが合体ものは言われてみれば未挑戦でした。
そういうのもちょっと作ってみたいですね〜!
I’m really curious how you add the armor afterwards I can’t quite get it
All I can teach you is how to make a frame, so I leave it up to each builder to decide how to modify it based on that frame.
do doctor octopus please
from spider man 2
AlcedoやOrge,White-eye,Dragoonなどのこれより大型のロボのフレームを公開する予定はありますか?
まだ未定ですがもしかしたら公開するかもしれません。
かなり昔に出してたロボのリメイクだ…
昔の作品の事を覚えていただけて嬉しいです😁
모코상 추천에 떠서 왔습니다
30MinuteMissions be damned.