I have recently moved into rental property that has combi compact eco rf 24 installed and I have no idea how to turn the heating on, the manual is not explaining it very well. The boiler looks so simple yet so difficult to operate. Can someone kindly assist?
At the beginning of this year, I never envisioned taking a laptop into the boiler room and trying to fiddle with it with a youtube video. Why is this happening to me? How many times must I keep fixing things that should just work? I'm about to try this. If it doesn't work I give up!
I've got the same, but turning the things at the bottom isn't doing anything. Constant flashing 0.0 and the weather is starting to get colder. Did you manage to fix it or did you call out a plumber?
Hi I have a rapid 25 gas boiler. Before to go away for 1 week I just turned the gas boiler just pulling out the insulation fuse that is beside the gas boiler. Now that I put the fuse again give power there is no power, just seen for half second the lights On and Off and no power anymore. Do you think the logic card inside is burned or could is any inside fuse gone? Tested the power fuse beside the gas boiler still good. Any help please 🙏 Thank you
Hallo I don't understand good English. Wat is this settings? Low. Midium. High. ... before down radiator is not so warm. And when i put it in high,now is hot.thx u
Hi I have a rapid 25 but the pressure is 0. I don't know how to increase the pressure because I don't see any loop under my boiler. Any tip please, we don't have heating and hot water at home Thank you
Hello Call the installer It should be an filling loop between right 22mm pipe and cold in pipe 15mm Some valves On the old boiler where it was the filling loop On intergas it is a lot off problems with the expansion vessel It will be better to check that
@@greenleafheating75 I have 2 expansion vessels, 1 is blu and another one is red (bigger). Is 2 days that I'm calling a lot of them.but they're always busy
@@greenleafheating75 don't understand but the pressure increased at 1.3 bar..but when I try to turn on heating or hot water is not working and after few seconds is flashing number 4 in the screen that seems a gas missing ignition but gas is open,still not heating and hot water
I have the same boiler, different set up. Had it for 3 years. Our radiators won’t bleed and we have had several engerniers come out and look at it. It makes really bad banging sounds. Is it trapped air?
Thanks for the video. It helped me a lot. Thank you
I have recently moved into rental property that has combi compact eco rf 24 installed and I have no idea how to turn the heating on, the manual is not explaining it very well. The boiler looks so simple yet so difficult to operate. Can someone kindly assist?
Hello
You need to find the termostat First
Thank you
@@greenleafheating75 thank you, I found Center thermostat in the house.
At the beginning of this year, I never envisioned taking a laptop into the boiler room and trying to fiddle with it with a youtube video. Why is this happening to me? How many times must I keep fixing things that should just work? I'm about to try this. If it doesn't work I give up!
Hello
What is the make of the boiler and model
Thank you
Can you use just your radiators always on and not turn the hot water on? Will it mess the boiler up?
Hello
Yes , you need to stop cold water going in the boiler and drain
👍
The bathroom radiator of this council flat is leaking. What can I safely do to stop it now?
Hello
You need to close the radiator valve
Thank you
Is this how to increase the pressure? The display is showing a flashing 0.0
Hello
Yes
Press off the boiler
The pressure will appear
Open the filling loop
Pressure 1.5 bars
Close the filling loop
And press power on the boiler
👍
I've got the same, but turning the things at the bottom isn't doing anything. Constant flashing 0.0 and the weather is starting to get colder. Did you manage to fix it or did you call out a plumber?
@@SpaghettiTraveller I did manage eventually. Took ages but I got there
@@lizpentaghast3482but how I turn valves but nothin happening it's all silent
@@Yeti-db8qd have you checked your water supply?
Hi
I have a rapid 25 gas boiler. Before to go away for 1 week I just turned the gas boiler just pulling out the insulation fuse that is beside the gas boiler. Now that I put the fuse again give power there is no power, just seen for half second the lights On and Off and no power anymore.
Do you think the logic card inside is burned or could is any inside fuse gone? Tested the power fuse beside the gas boiler still good.
Any help please 🙏
Thank you
I have similar boiler which keeps loosing pressure but absolutely no leak found.
Hello
On intergas you need to check the expansion vessel
Is one of the common problem
👍
Hallo I don't understand good English. Wat is this settings? Low. Midium. High. ... before down radiator is not so warm. And when i put it in high,now is hot.thx u
Hello
It is testing mode
Hi
I have a rapid 25 but the pressure is 0.
I don't know how to increase the pressure because I don't see any loop under my boiler. Any tip please, we don't have heating and hot water at home
Thank you
Hello
Call the installer
It should be an filling loop between right 22mm pipe and cold in pipe 15mm
Some valves
On the old boiler where it was the filling loop
On intergas it is a lot off problems with the expansion vessel
It will be better to check that
@@greenleafheating75 I have 2 expansion vessels, 1 is blu and another one is red (bigger). Is 2 days that I'm calling a lot of them.but they're always busy
@@ledoledo515
It just need to tell you where it was install the filling loop
Is no need to come to your house
@@greenleafheating75 don't understand but the pressure increased at 1.3 bar..but when I try to turn on heating or hot water is not working and after few seconds is flashing number 4 in the screen that seems a gas missing ignition but gas is open,still not heating and hot water
@@ledoledo515
Hello
Call the warranty
Thank you
Use CT1 Miracle seal with this. Best boilers u can get.
I have the same boiler, different set up. Had it for 3 years. Our radiators won’t bleed and we have had several engerniers come out and look at it. It makes really bad banging sounds. Is it trapped air?
please check my video with easy bleed radiator and maybe it will be of any help