Tks Tim for your review. I Love the cliptech system. I have 4 pouches I use on my 16" tool bag. Also have a tough built with wheels. I Love tools. I'm 80 and have some tools since my 30's. I'm a DIY but Live to help people keep their stuff going especially seniors. Have a good week. 😊
Thank you for your review, it helped me get an idea of the size comparison of the different pouches. I’ve been able to decide which ones I want because of your video. Thank You Sir!
Can you do a comparison between all the technician sizes? I’m super confused about the website model number /description of the photo they display. I see a Small, Large, 4-pocket, 5-pocket, 7-pocket, 11-pocket, and custom size… but they all share the same images (lolwtf)
1:39 is that supposed to be for a tape measure?? I bought that one today and its super tight for a tape measure unlike all the other tape holders on their other pouches. At first i thought they put it on upside down
@THETIMINATORTHETOOLMAN not the pouch itself but the clip on the side of it. I assume its for a tape measure. But its different than the tape slots on their other pouches and its really tight making inconvenient to slide your tape in and out of. Just curious if it was for something else that im not aware of
Hi mate what is the part number/ product code for the smallest pouch you show at around 2:35 into the video. I really like the small utility pouch but I can find one like that with the clip tech on the back in the UK. The small utility pouch on offer over here has the standard black plastic belt clip/loop.
I dont get it. It takes tremendous force to open the clip. Unwavering tried multiple clips, and it either has required smoothbjaw pliers or mashing the clip against the palm of my hand around my thumb. Is it supposed to be that hard?
Yes tough built needs somebody with more brains designing their stuff somebody that maybe actually works in the trades and can show them how to set up the pouches properly and the totes it's extremely stupid that the totes will not hold most of the pouches properly where the pouches clipped to the tote is about 3 in shorter than the actual pouches you want to clip on to the tote doesn't make any damn sense here's a little advice for the toughbuilt morons you take your tallest pouch stand it up straight on the ground measure to where the clips will connect add 1 inch to that measurement at minimum and that's where your clip bar should be on your totes you definitely should not have to tip your tote on its side to clip a pouch on but I do love the concept and I do have a few of these that I use fairly regularly and if these things are more customizable as in I could get some of both sides of the clips from the company if they would make pouches to go inside pouches like this guy has by accident that would make them more useful and versatile
Tks Tim for your review. I Love the cliptech system. I have 4 pouches I use on my 16" tool bag. Also have a tough built with wheels. I Love tools. I'm 80 and have some tools since my 30's. I'm a DIY but Live to help people keep their stuff going especially seniors. Have a good week. 😊
Thanks for watching my video
It really means a lot
Figured I'd help .
1st construction pouch: Contractor Pouch TB-CT-01
2nd construction pouch: Project Pouch / Hammer Loop TB-CT-24
Drill Holster - Large TB-CT-20-L
1st utility pouch (Not 100% sure): General Purpose Pouch with Knife Pocket TBL-CT-426
Small utility pouch: Utility Pouch TB-30
Electrician's pouch: Small Electrician Pouch TB-CT-34
7 pocket pouch: Either TB-CT-36-M7(med) or TB-CT-36-L7(lg)
Thanks i appreciate you watching and helping out.
ruclips.net/p/PL-FLPy3GT8024_qQ85u1GL85Kj7M7qgYb&si=FqraTQeZmTe-rvVx
THANK YOU!!!!!!! GOLD INFO
Thank you for your review, it helped me get an idea of the size comparison of the different pouches. I’ve been able to decide which ones I want because of your video. Thank You Sir!
Thanks for watching and commenting and hopefully subscribing 😜👍
Check out the toughbuilt tool chat Facebook page
Subscribed. Thanks for showing how you carry all your tools while working. Much appreciated Tim. -Nick
Thanks Tim, I have the small drill holster, much smaller and more compact than the one in the video. It's perfect for my M12 Fuel impact 😎🛠️😎🛠️😎
I have the small one with the extra storage pouch option, I modded it to perfection.
Thanks, i guess I have the large holster then. I’m getting old and couldn’t remember
Is there anything toughbuilt that you guys or gals would like to see more of?
@@THETIMINATORTHETOOLMAN , I'd like to see their levels even though I just bought myself a set of stabila 196's.
@@THETIMINATORTHETOOLMAN some bags would be nice, 26" massive mouth and XL rolling bag for example
Can you do a comparison between all the technician sizes? I’m super confused about the website model number /description of the photo they display.
I see a Small, Large, 4-pocket, 5-pocket, 7-pocket, 11-pocket, and custom size… but they all share the same images (lolwtf)
1:39 is that supposed to be for a tape measure?? I bought that one today and its super tight for a tape measure unlike all the other tape holders on their other pouches. At first i thought they put it on upside down
I don’t believe so. I thinks it’s mainly for fasteners
Thanks for watching
@THETIMINATORTHETOOLMAN not the pouch itself but the clip on the side of it. I assume its for a tape measure. But its different than the tape slots on their other pouches and its really tight making inconvenient to slide your tape in and out of. Just curious if it was for something else that im not aware of
@ryano3959 yes, that clip is for a tape measure
@@ryano3959no its for drill hooks n stuff
Hi mate what is the part number/ product code for the smallest pouch you show at around 2:35 into the video. I really like the small utility pouch but I can find one like that with the clip tech on the back in the UK. The small utility pouch on offer over here has the standard black plastic belt clip/loop.
TB-30 utility and knife pouch
Thanks for watching, commenting and subscribing
You might like this one more. Check this video out. The links to order are in the description
ruclips.net/video/1vGF8KCmZBI/видео.html
Where did you buy the 7 pocket large technician pouch from please??
Lowe’s
I had answered your question earlier but not sure where it went.
Thanks for watching
I dont get it. It takes tremendous force to open the clip. Unwavering tried multiple clips, and it either has required smoothbjaw pliers or mashing the clip against the palm of my hand around my thumb. Is it supposed to be that hard?
@@steveg7000 they tend to loosen up after a few uses. At least for me
Thanks for watching and commenting
@@steveg7000 not sure if you saw this video as well.
ruclips.net/video/NJiXcOnU4kY/видео.htmlsi=2dxJatRWkRIPpARD
Again, Thanks for watching
What’s the insert you put in the pouch?
That is the veto MP2 pouch.
ruclips.net/video/9AcQq7ukxW8/видео.html
Check out this video
Yes tough built needs somebody with more brains designing their stuff somebody that maybe actually works in the trades and can show them how to set up the pouches properly and the totes it's extremely stupid that the totes will not hold most of the pouches properly where the pouches clipped to the tote is about 3 in shorter than the actual pouches you want to clip on to the tote doesn't make any damn sense here's a little advice for the toughbuilt morons you take your tallest pouch stand it up straight on the ground measure to where the clips will connect add 1 inch to that measurement at minimum and that's where your clip bar should be on your totes you definitely should not have to tip your tote on its side to clip a pouch on but I do love the concept and I do have a few of these that I use fairly regularly and if these things are more customizable as in I could get some of both sides of the clips from the company if they would make pouches to go inside pouches like this guy has by accident that would make them more useful and versatile
Пластик хрупкий у них
Please English
English translation
Tough build has a fragile plastic