Rutland: Know How - Rutland TS.9205 How to fit - Pull Side Figure 1/Standard Arm

How to fit the Rutland TS.9205 CE marked door closer on the pull side fig 1 application.
The variable spring EN2-EN5 door closer is suitable for doors up to 100kg/1250mm wide.
Rutland TS.9205: www.rutlanduk.co.uk/ts-9205-d...
TS.9205 Specification / Data Sheet: www.rutlanduk.co.uk/product-d...
TS.9205 Operations & Maintenance Manual: www.rutlanduk.co.uk/product-d...

[@kiwifarmer7254]

Hi there we watched one of your video,s on the same door but another brand closer, door already had a few more holes ,this explains it. clear instructions . it took my wife and me 15 minutes to install. thanks very much

[@adrianwebb4341]

Just fitted one fantastic product great instructions very pleased
Adrian

[@fahimrahim2470]

Good explanation! Helped and worked for me! ... Thanks a lot

[@robinjones2054]

Hi Glad I watched this. The template / instructions did not fully explain about the 90 degree angle on the arm.
Excellent product

[@RutlandDoorControls]

Glad it was useful Robin.

[@berlewi]

Hi, is there enough adjustment in the arm if it is fitted to architrave, or does the architrave need to be cut to accommodate the arm plate. Many thanks!

[@davidhale5304]

Excellent Video and explanation. There are seven of these units in our apartments, all wrongly adjusted ,so it seems .One of them is the push type fitted on the exterior of the door. My own one is mounted "upside down" ,.Does this make any difference?
Just downloaded your installation sheet looks like its correct for right hand door hinges (from inside)

[@RutlandDoorControls]

Glad the instruction sheet was helpful!

[@ninadoughty]

Excellent 👍

[@vegasastras9194]

What's that final adjustment that you missed for? On one side furthest from you??

[@dairinkeating1884]

Is the backcheck the best method of stopping the door from opening too quickly when caught by high winds? We recently had an injury where the door was opened, the wind caught it and it yanked the persons arm back. Thanks

[@RutlandDoorControls]

Thank you for your interest in this video .Unfortunately backcheck does not prevent winds from catching a door and opening with the force of the wind as it relies more on an instant force rather than a continued force, such as wind, we don't recommend relying on backcheck when used on exterior doors for exactly this reason, especially when the door can extend past the door closer arm and clash with an exterior wall. We always suggest a safety barrier to protect wall/door damage. Hope this helps

[@scottbranch4798]

That's all fine but there's no reveal at the top of the door

[@RutlandDoorControls]

Hello, for fitting in a reveal, the maximum size reveal this closer can be fitted in is 60mm. For anything more we would usually recommend fitting the closer on the other side if possible, or using a concealed door closer.
www.rutlanduk.co.uk/its-11204-concealed-cam-action-door-closer