Видео

How do you adjust the tension, I can hardly open the door!!

Would this help prevent doors slamming shut when other internal doors are open and there's a draft?

La mejor explicación en todo RUclips

Just bought one of these, arm not shown on any of the instructions. TS5204BBCDA - TO BE CLEAR ARM NOT SHOWN ON INSTRUCTIONS FOR HANGING DOOR OPENING IN EITHER DIRECTION! Perhaps something to think about for the future.

Hello I seen that you gave my friend Jess a clear door closer and I was wondering if I can have one to thx

Hello Rutland, do you know that little door that you’ve got right there did you make it or did you buy off somewhere cause I would love to have one of them

😂😂😂that specialist is 00..gap off the doors is 9mm on the top.so we should stop looking that video from start😅😅

thank you so much for the clear explanation with the visual guide

Great video, however could just put the upper plate on first , that’s how I did it

Can it be installed vertically? To a door that opens 180 degrees from top to bottom?

Two errors that I found whilst fitting. Firstly, if you fit the top slide bar from a right hinge (demonstration shows left hinge) then the countersinks are the wrong side and the mount screws are proud. Secondly the instructions state leave a 28mm gap between mounting holes (top fixing to bottom fixing). This is impossible as you will find the connector bar has no room to move. This gap is determined by the gap in the top of your door so I suggest eyeing up the gap with the connector bar in place for a better fit. You can see in the demonstration that he left too big a gap and the connector bar is on a slight slope which is better than what I did by following the instructions and not allowing hardly a gap at all.

That's all fine but there's no reveal at the top of the door

Problem is when Somone forces the door closed it will explode in your face I've seen it happen

💬 In answer to Chris Waterman's idea, 'How in this digital age there should be a quick way to replace BS476 in certification with EN 1634?', our answer to this is "definitely not possible". You cannot elevate BS 476 testing to EN 1634-1. Each application tested to BS 476 requires completely new testing to the European EN 1634, hence the concern from the industry that it will be costing ballpark £10k each test... and the rest, if you include admin and manufacturing costs. And that's for every fire safety product detail affected. Unfortunately, it is not a simple, quick, low-cost 'search and replace' digital world exercise.

My door is intermittently stiff!! It opens perfectly dozens of times in a row, then it suddenly becomes really hard to open for the next 10 or so times. Then it returns to working perfectly again. Do you have any suggestions?

Horrible video. No proper sound. Bad accent. Bad explanation.

It didn't seem as easy As that on site lol😂

You cannot alter the actual pressure required to open the door with this model. Absolutely useless if you are old or infirm. You need a model that you can alter the effort required to open the door .This isn't it.

Excellent 👍

I'm relieved that you produced this video because the instructions that come with the closer are appallingly bad. GCSE fail bad - I can't believe someone actually got paid to produce such awful diagrams. In the diagram it mentions nothing about how the template refers to fitting on the pull or push side. The diagram suggests that the two sides of the template are for left or right handed doors. Let's hope all the effort went into the design and manufacture because ZERO EFFORT went into producing the instructions. If you care about your customers then include a usable diagram produced by someone who knows how to communicate.Maybe even include some text to let people know what you are TRYING to say!Jeez- how much does ink cost??? It's not as if you have to pay someone to type each set of instructions by hand.

Done 100s all on pull side my first push one tomorrow thanks so much for a great vudio perfect

What's that final adjustment that you missed for? On one side furthest from you??

Wow nice boss 👌👌okay

Always look to an English professional for exact fitting and explanation. Very well done thanks. And I’m an Aussie.

Is the backcheck the best method of stopping the door from opening too quickly when caught by high winds? We recently had an injury where the door was opened, the wind caught it and it yanked the persons arm back. Thanks

Just fitted one fantastic product great instructions very pleased Adrian

ruclips.net/channel/UCLcymhgQ76DA0Z_zSBY1dwQ لا تنسوا الاشتراك بالقنان

Very helpful video but I was failing totally to adjust the two speed control screws correctly until I realised my door was a left push and opposite to yours which meant the valve screws were the other way round! Doh!

Good sir G

really interesting guys. I missed the live, so this is great. Such a can of worms to deal with, but it absolutely has to happen, and all doors be third party certified.

Whether installing on push or pull side, is the door still easy to open even though it now closes slowly?

Dear sir I will be have a problem gp3 the problem is when the glass door is closed that time very fast come when open after left so please you can give to me the solution

is it true that fire doors must have minimum size 3 door closers? the one i have is WAY too strong for a commercially available 760mm plywood fire door.. what closers are you supposed to use with these smaller domestic doors?

Great video! I have a gold Rutland door closer on my bedroom door.

Im having problem which is. It is too heavy to open the door. I dont know why. Any suggestion?

I'm having problems with opening tension and my door closer just have ar the hinge side the latch and speed valves screws, an a big female Allen screw, so how can I reduce tension on this one, thanks for the help.

Excellent Video and explanation. There are seven of these units in our apartments, all wrongly adjusted ,so it seems .One of them is the push type fitted on the exterior of the door. My own one is mounted "upside down" ,.Does this make any difference? Just downloaded your installation sheet looks like its correct for right hand door hinges (from inside)

It's pushing the door, not pulling the door.

Does the cover come in the box already or do you have to buy separately

Well, that makes it easy to adjust! On top of a door close well above head height

Roger Schultz I have a 5 inch difference between the door and the jam above, have a thick wall. What difference will that make?

Thanks 👍🏼

Thank you so much for the clear instructions ... It helped me a lot

Hi Glad I watched this. The template / instructions did not fully explain about the 90 degree angle on the arm. Excellent product

Mantap

Max 100kg ???

What's the price for Pakistan. +923342422245 WhatsApp me please

This guy is funny, man

How can I install a door closer on a glass door without any frame on it

What language is his speaking is he German