Check out this video showing amp44 forged pistons they are 500$ forged pistons from a russian company ruclips.net/video/U_HZ3gfRnP4/видео.html This dud is legit use captions for the english and he is reviewing them. Forged pistons with m50 rods ull be good for 600
Hey Mike it's Jamie from chch who used to own the White ex lancer turb that ya mate damo got . just a tip bro you do any welding like that you need to bevel the bit your welding. To get better penetration.crazy seeing you on here bro loving the vids .
Hey from Australia!! Thanks for the video. I've just bought a 280zx and will be doing the exact same thing as you. Will be following your build (and hopefully filming mine).
The Feast And The Furious hey bro! I live in Melbourne 😜. That’s rad! They’re such cool cars. I’m beginning a mini restoration on mine today, vids will be coming from this evening onward 🤘🏻
Loved the 80’s background music while working on the 80’s Datsun, for a sec i thought I was back in 1984. Not the biggest fan of these but yours looks freakin mint!!
Hey man loved the video! Car looks awesome. I had a question, I don't know if you have had to change or replace the weather stripping but if you did. Do you know where I can get any? Mainly for the door, rear hatch and t-tops. That's my biggest issue with my 280zx right now
Battle Geek! Thanks bro! That’s 100% the plan. Hence why we used such small screws 🙊. Going to go ruv nuts and spray everything properly. And get the car wrapped!
Hey Mike, nice work mate. Don't want to be a nay sayer and all the rest of it, but I'm fairly certain both that coil over and hub/stub were cast and required to be pre heated before welding. If it is cast you will certainly get cracks/worse at the welds. I wasn't too sure about slotting the chassis for you adjustments either, but anyway. Cars looking killer man, see ya on the next one!
Hey James, thanks for the advice bro! Yes I think you're right about the cast needing pre heat. I think i'm going to get Damon to make me a new set of fronts with some nice new coilovers. This car does deserve the nice stuff! The slotting of the subframe worked well, it's not ideal but unfortunately there's not many options out there for this chassis.
mr323i 🤷🏻♂️ nahhhhh. Pretty much everyone I know run spacers in their road cars. Just gotta run good quality shit! All the 4wd dudes with big wheels and flares are running spacers 😝
@@itsmikelake and that's why all their vehicles get detects and can't afford to pay the fines or get the right tyres rims , no one i know uses stupid ass spacers that is for tightass non car people do , real at a real street car no spacers just the right rims and a price tag to go with it
@@bigb3281 I feel you dude. The GKtech spacers are the only one's i'd trust for the road. In saying that, i'm getting some big boy wheels made for this thing. These are only temporary 😝
Lurcher260 haha i fricken love this car! I’ve driven it a total of 5 times now and been stopped each and every time by people telling me how cool they think it is 🤷🏻♂️
Rick plenty of people run spacers. And these coilovers are as good as any. Plenty of heat and penetration in the welds in the front coilovers. FYI, this is the only way to build zx coilovers unless you do an s13 front end conversion. 👌🏻
Each to their own my friend! That's the beauty of building cars. FYI, this Datsun was sitting rusting away for the past 10 years next to an old fellas garage. I saved it and gave it a new lease on life :D.
lol, what did i just watch always liked ur content until i saw this u got a cheap welder and ur relying on it for the suspension of your car?! why not get a professional to do the job. this can kill people and the spacers are crazy why would you bother getting new wheels if they dont fit to how u want? spacers are deadly and illegal for a reason im not expert but your ruining a classic 😾
Thanks for the comment man. I know my limits in terms of skill with a welder and I’m more than happy with the welds. In saying that, I’ll be getting Damon (fabricator friend) to look over them to triple check. As for the spacers, these are a very high quality unit. Plenty of people run them on their daily’s. If I didn’t think they were safe, I wouldn’t run them. I appreciate the feedback all the same 😁
FYI, I will be getting the welds on the coilovers tripple checked by a fabricator friend to make sure they're safe! No need to worry 😝 ❤️
Check out this video showing amp44 forged pistons they are 500$ forged pistons from a russian company
ruclips.net/video/U_HZ3gfRnP4/видео.html
This dud is legit use captions for the english and he is reviewing them.
Forged pistons with m50 rods ull be good for 600
Hey Mike it's Jamie from chch who used to own the White ex lancer turb that ya mate damo got . just a tip bro you do any welding like that you need to bevel the bit your welding. To get better penetration.crazy seeing you on here bro loving the vids .
@@jimmyholiday4670 Hey bro! Sorry I only just saw this comment. Thanks for the advice my dude. Hope you're well!
Finally some love for the 280zx. Awesome build bud.
Moises Garcia thank you bro! Fricken love these cars 🤘🏻
Hey from Australia!! Thanks for the video. I've just bought a 280zx and will be doing the exact same thing as you. Will be following your build (and hopefully filming mine).
The Feast And The Furious hey bro! I live in Melbourne 😜. That’s rad! They’re such cool cars. I’m beginning a mini restoration on mine today, vids will be coming from this evening onward 🤘🏻
Mike Lake Super rad! My fiancé Brendan and I will be working on our 70’s machines. Should really remember to put it on RUclips. I’ll stay tuned :)
Loved the 80’s background music while working on the 80’s Datsun, for a sec i thought I was back in 1984.
Not the biggest fan of these but yours looks freakin mint!!
Hartek thank you so much bro! Love me some 80’s synth wave 😍
She looks awesome mate, well done. Pretty brave move cutting those rear wheel wells but you nailed it
Cheers Dave! Was scary as hell cutting into her haha.
Where did you get those flares from? I'm trying to find for my ZX but all the ones I could find have a arch that's too wide.
God I want those coilovers. Where did you get them done? Suspension parts are so hard to find for the 280zx
What size flairs did you put on your zx.
I have the 4" ones on mine. :D
Like the guard preparation work, mind saying what flares from where were used?
Whats the offset on those wheels?
Where can I get a set of those euro turn signals?
Where did you get your flairs?
We sell them on www.twostepgarage.com
Music is 100000% for this cool car 👍
Head over to a local Melbourne fella for diy coilover fab work lake fab work haha
Mitch Lawrie hahaha I’m certainly no fabricator 😂
Gorgeous Z. My dad has one and I have two 300zx.
Thanks! Hell yes, I love the whole Z family.
Mike Lake hell yeah man. I’m a third generation z owner.
Loving the content man the car looks sick and I don't mind the blue
Ryan Hill thanks dude, appreciate it!
Hey dimensions wheels and fender flares? 😄 tnx man
Hey man loved the video! Car looks awesome. I had a question, I don't know if you have had to change or replace the weather stripping but if you did. Do you know where I can get any? Mainly for the door, rear hatch and t-tops. That's my biggest issue with my 280zx right now
looks killa, should riv-nut the flares on and paint them with the spoiler so it's all matchy matchy
Battle Geek! Thanks bro! That’s 100% the plan. Hence why we used such small screws 🙊. Going to go ruv nuts and spray everything properly. And get the car wrapped!
Hey Mike, nice work mate. Don't want to be a nay sayer and all the rest of it, but I'm fairly certain both that coil over and hub/stub were cast and required to be pre heated before welding. If it is cast you will certainly get cracks/worse at the welds. I wasn't too sure about slotting the chassis for you adjustments either, but anyway. Cars looking killer man, see ya on the next one!
Hey James, thanks for the advice bro! Yes I think you're right about the cast needing pre heat. I think i'm going to get Damon to make me a new set of fronts with some nice new coilovers. This car does deserve the nice stuff! The slotting of the subframe worked well, it's not ideal but unfortunately there's not many options out there for this chassis.
Mike Lake that’s all good mate! Sounds like a plan to me!
It’s good you’re having a go mate and not letting the limitations of the chassis beat you!
How much did this roughly cost?
Hey bro! $1000 Australian ish 😁
Hi Mike! Seriously it really looks kills... btw Where u get the duck tail again?
jerry sou thanks Jerry! I got it off Facebook marketplace. Unfortunately I don’t know the brand :(
Looks good mate👍😂
Do it dan haha thanks bro!!
Wheels spec???
wanna come over and install flares on my 280zx as well? Ugh i wish I knew how to do these things!
Bro this thing looks sick!!💯🔥🔥🔥 what wheels are those? I’d love to get some for my zx
Thanks so much bro! They're Rota RBX 17x9.5 -17 and 17x9 -13. I sprayed the centres silver 🤓
the after market mirrors are silly ... MHO ...
you166mhz each to their own 🤓
Looking sweet man
Haha why so serious 🤷🏼♂️😂 nice lengthy video dude. Sure if your car/s were unsafe they wouldn’t let you take people for ride alongs at KIR ect 👍🏻
Spacers are illegal in Australia for road use wtf. Maybe get the right rims/tyres.
mr323i 🤷🏻♂️ nahhhhh. Pretty much everyone I know run spacers in their road cars. Just gotta run good quality shit! All the 4wd dudes with big wheels and flares are running spacers 😝
@@itsmikelake and that's why all their vehicles get detects and can't afford to pay the fines or get the right tyres rims , no one i know uses stupid ass spacers that is for tightass non car people do , real at a real street car no spacers just the right rims and a price tag to go with it
That's four seat.
Broooo thats gangsta
Hey bro my name is John Hanks I live in Webb Alabama I love you check out my truck I have a 86 Toyota pickup
Lipstick is always gonna be just lipstick, no matter what. Sad to see such a hack.
What are you on about 🤣
This some dodgy P plater shit going on
Haha, how so? Ya weld up one set of coilovers and people lose their minds 😂
Not hating, was more so referring to the 40mm spacers but I’ve done some pretty sketchy shit in saying that 😬
@@bigb3281 I feel you dude. The GKtech spacers are the only one's i'd trust for the road. In saying that, i'm getting some big boy wheels made for this thing. These are only temporary 😝
You own a 280ZX?
My condolences.
Lurcher260 haha i fricken love this car! I’ve driven it a total of 5 times now and been stopped each and every time by people telling me how cool they think it is 🤷🏻♂️
280zx>260
Cars are like women, sometimes it’s the flawes that make you attracted to them.
this is not good,spacers and backyard coilovers and kiwi engineering,for on the road, laws are for a reason
Rick plenty of people run spacers. And these coilovers are as good as any. Plenty of heat and penetration in the welds in the front coilovers. FYI, this is the only way to build zx coilovers unless you do an s13 front end conversion. 👌🏻
@@itsmikelake ok all good ,but not good when looks can kill
I wouldn’t go near it if I didn’t think it was safe 🤷🏻♂️
so many Datsun's ruined with this type of stuff
Each to their own my friend! That's the beauty of building cars. FYI, this Datsun was sitting rusting away for the past 10 years next to an old fellas garage. I saved it and gave it a new lease on life :D.
lol, what did i just watch always liked ur content until i saw this u got a cheap welder and ur relying on it for the suspension of your car?! why not get a professional to do the job. this can kill people and the spacers are crazy why would you bother getting new wheels if they dont fit to how u want? spacers are deadly and illegal for a reason im not expert but your ruining a classic 😾
especially on the standard studs probably from factory 🤯
Thanks for the comment man. I know my limits in terms of skill with a welder and I’m more than happy with the welds. In saying that, I’ll be getting Damon (fabricator friend) to look over them to triple check. As for the spacers, these are a very high quality unit. Plenty of people run them on their daily’s. If I didn’t think they were safe, I wouldn’t run them. I appreciate the feedback all the same 😁
looks mint mate
Thanks Stigs cousin!