Nice build! Coils don’t Thermosiphon well, I suspect this works more like a batch heater(big coffee pot) and gulps and pulses as the water in the coil boils. Getting the coil lower and closer to the tub would help with this. A straight upward angle from the top of the coil up to the top port on the tub would also help a lot. Droops kill the thermosiphon flow. A coil with a steeper pitch would also help. With your fab skills, a vertical tube heat collector would not be out of the question and would have much faster flow and more efficient heat transfer…
Ad a ring at the bottom with holes for releasing air and power an air pump with a battery and solar. Similar set up too a blow up hot tub but using a solar set up if you don’t have power just for the air pump. My blowup tub is in my back yard working as it was intended right now with an ice tent over it because I have power. But I can use it off grid. My tent stove is set up with copper pipe and I have a power station and an air pump made so I can leave the main electrical base at home. All portable and it sets up in 15 min, fills in 30 min with a decent water pump and heats in a few hours. I’ve used it at the cottage like that because my gramps didn’t want to pay the electric bill and I was there for a few months. If I knew I might use it I just fire some wood in the stove. Carry up my power station when I go for a tub.
Now this was entertaining, instructive and inspirational.. Great stuff. Was a bit worried the plastic hoses would melt, but seems like they did fine. The shaping of the coil for the heater was.. wild :-)
Wow! This looks awesome. 👍👍👍. I wish I had a place to build one. I'm a very good welder and have also worked quite a lot with wood. Just need a few tools you have there and a workshop :)
?LOVE IT, 1 question is did the poly hoses last or did you go with some other material for the tube heat at the stove connection. Comment is GREAT metal smithing.
Имея такую мастерскую с таким дорогим оборудованием, проще купить готовую купель, а не городить всё это. Но так то да, дядька молодец, что сделал себе сам, но опять же, мало кто сможет это повторить в домашних условиях.
Необязательно из дерева. Можно из листового железа. Печку можно также сделать из железной бочки. Просто будет другой вид. А над ванной нужно сделать навес или зонтик. И также сделать рядом беседку и раздевалку, чтобы можно было пить чай , обедать или отдыхать.
Эффективнее "японская баня", тот кто постоянно дрова "добывает" поймет меня. Ну, там как в самоваре топка омывается водой, т.е. все тепло от дров идет исключительно на воду.
Amazing job! I've got a pile of cedar logs and woodmizer sawmill. This might be my next project. Is it difficult to regulate the temperature of the water? Would a ball valve in one of the water lines help if it is?
I’ve got a Bluetooth thermometer that I watch as I bring the tub up to 105 degrees. I try to let the fire die down by then or sometimes I have to scoop the coals out into a bucket
Nice work. What material did you use to make the coil out of? Size, wall thickness, material type. Since you went to the effort of making that tube bender would you be Interested in making another coil to sell?
1-1/4” OD stainless steel with a 1/16” wall. Unfortunately I have taken apart the tube bender. I have seen many DIY tub and pool heaters on RUclips that used flexible copper coils. Mine works well but I am considering building a different boiler with a water jacket to try to harness more of the energy from the fire and be able to heat the tub faster. I have also learned that the flow rate of the thermal siphon changes quite a bit by the temperature of the fire and the temperature changes quite a bit depending on the moisture content of the firewood. Good luck. It’s a fun project
Check out the Salty Barrel coil kit. It's a large stainless steel heating coil with the hoses and fittings included. Our coil would heat a tub of this size in about 3 hours
Так вроде печь должна быть ниже бассейна, а не на одном уровне? Здесь получается по верху бочки - кипяток, а сразу после середины - леденая вода, которую невозможно нагреть.
There’s no way to keep the water warm when not in use so you’d need to start heating 4 hrs before you wanted to use it and then would need to sit there and feed the fire..
No pumping system. Thermal siphon. Google Dutch tub. Works well. I added a bigger firebox and chimney to the boiler and now it works really well. 24 hrs to heat to 105 degrees from 53 degree well water. Approx 2200 litres.
Эффективнее "японская баня", тот кто постоянно дрова "добывает" поймет меня. Ну, там как в самоваре топка омывается водой, т.е. все тепло от дров идет исключительно на воду.
Added a bigger firebox and chimney to the boiler and now it works really well. 24 hrs to heat to 105 degrees from 53 degree well water. Approx 2200 litres.
A little Led for the head is all I need , But The Ocean by Led Zeppelin would have been better than Babe I'm gonna leave you Or even better When the Levee Breaks Or Moby Dick Or Kashmir Or In the Evening Or Dazed and Confused Or
You guys have all the toys. Making it easy. Nicely done
Отличная работа! Автор - настоящий мастер. приятно было смотреть как он всё делал!
Wow,real craftmanship. You have all the right tools for the job.
Nice build! Coils don’t Thermosiphon well, I suspect this works more like a batch heater(big coffee pot) and gulps and pulses as the water in the coil boils. Getting the coil lower and closer to the tub would help with this. A straight upward angle from the top of the coil up to the top port on the tub would also help a lot. Droops kill the thermosiphon flow. A coil with a steeper pitch would also help. With your fab skills, a vertical tube heat collector would not be out of the question and would have much faster flow and more efficient heat transfer…
A master showing his knowledge.
great video.
And of course only years of experience and excellence let you work the wood that way.
Very nice. Love how you go next to the hot source as the cold night comes !
Music, skills, editing…. Great stuff 🤙🏾
Incredible skill. Well done fabrication is so cool.
What a talented craftsmen/ engineer
You're a fine craftsman that's for sure!
Ad a ring at the bottom with holes for releasing air and power an air pump with a battery and solar. Similar set up too a blow up hot tub but using a solar set up if you don’t have power just for the air pump. My blowup tub is in my back yard working as it was intended right now with an ice tent over it because I have power. But I can use it off grid. My tent stove is set up with copper pipe and I have a power station and an air pump made so I can leave the main electrical base at home. All portable and it sets up in 15 min, fills in 30 min with a decent water pump and heats in a few hours. I’ve used it at the cottage like that because my gramps didn’t want to pay the electric bill and I was there for a few months. If I knew I might use it I just fire some wood in the stove. Carry up my power station when I go for a tub.
Year 3 now and my first tub is still working fine.
You are a beast. Unbelievable incredible skill.
Freehanded masterpiece that was an absurdly good watch ty!
Дуже талановито!
Віртуозна робота, майстерньо і з фантазією!
Now this was entertaining, instructive and inspirational.. Great stuff. Was a bit worried the plastic hoses would melt, but seems like they did fine.
The shaping of the coil for the heater was.. wild :-)
Nice build mate 👍
Great idea. Only if you want the stove not to lose heat outside, I suggest painting it silver. Black is good inside - it will quickly heat the room.
Bravo complimenti per il lavoro e la musica
Wow! This looks awesome. 👍👍👍. I wish I had a place to build one. I'm a very good welder and have also worked quite a lot with wood. Just need a few tools you have there and a workshop :)
Very impressive. Well done, it looks great.
Wow your pretty good man nice work lots of talent
Peace be upon you thank you very much I'm from Morrocco
many skills and much ingenuity. thanks for sharing.
AMIGO ERES EL P AMO . MUY BUEN VIDEO. GRACIAS SALUD Y SUERTE.
Really nice build!!!!
Вначале он посадил деревья, пока они росли он покупал оборудование.. И все для того чтобы снять ролик))
I love how all your tools are made from wood as well 😂
Amazing. With those tools probably you can make wooden space x
Обалденно!😍
Cool work!
WOW! I bow at your feet.
Great tunes boy
BRAVO MASTER.
Сколько оборудования было использовано.. даа.. а тут лобзик и ручной фрезер.)))
?LOVE IT, 1 question is did the poly hoses last or did you go with some other material for the tube heat at the stove connection. Comment is GREAT metal smithing.
BRAVISSIMO
This is must be what therapy feels like.
This is my hero
Not bad. Keep practicing...Just kidding - friggin awesome!!!
Best band ever
Имея такую мастерскую с таким дорогим оборудованием, проще купить готовую купель, а не городить всё это. Но так то да, дядька молодец, что сделал себе сам, но опять же, мало кто сможет это повторить в домашних условиях.
Согласен на сто
Необязательно из дерева. Можно из листового железа. Печку можно также сделать из железной бочки. Просто будет другой вид. А над ванной нужно сделать навес или зонтик. И также сделать рядом беседку и раздевалку, чтобы можно было пить чай , обедать или отдыхать.
Хуясе ты мечтатель, прям как я
Эффективнее "японская баня", тот кто постоянно дрова "добывает" поймет меня. Ну, там как в самоваре топка омывается водой, т.е. все тепло от дров идет исключительно на воду.
Amazing job! I've got a pile of cedar logs and woodmizer sawmill. This might be my next project. Is it difficult to regulate the temperature of the water? Would a ball valve in one of the water lines help if it is?
I’ve got a Bluetooth thermometer that I watch as I bring the tub up to 105 degrees. I try to let the fire die down by then or sometimes I have to scoop the coals out into a bucket
@@ScottyDLewis thank you for the reply. Sounds like that would work well. The Bluetooth thermometer is a great idea.
Amazing!!!
Awesome 👌
ай молодец умница
Супер 🤟😁👍
Awesome, are you making any to sell? Just in need of the stove and coil components, not the tub part
wife and I are inpressed. Thank you. Can we be your friends pls...
Nice video! Do you find that the water in the tub is hot at the top and cold at the bottom?
Ох и долго пришлось ждать, дабы нагреть такой объем воды! 🤔 Ноо крутто! 👍
I'll use the ground heat on sunny day
Nice work. What material did you use to make the coil out of? Size, wall thickness, material type. Since you went to the effort of making that tube bender would you be Interested in making another coil to sell?
1-1/4” OD stainless steel with a 1/16” wall. Unfortunately I have taken apart the tube bender. I have seen many DIY tub and pool heaters on RUclips that used flexible copper coils.
Mine works well but I am considering building a different boiler with a water jacket to try to harness more of the energy from the fire and be able to heat the tub faster.
I have also learned that the flow rate of the thermal siphon changes quite a bit by the temperature of the fire and the temperature changes quite a bit depending on the moisture content of the firewood.
Good luck. It’s a fun project
Check out the Salty Barrel coil kit. It's a large stainless steel heating coil with the hoses and fittings included. Our coil would heat a tub of this size in about 3 hours
Hola, funcionaria el sistema si el deposito de agua esta a 1.50 de altura y la cocina a nivel del piso.
Great Work, did you used the fresh (red) Cedar, or tried it before.
Greatings from Germany
What. And with only 1 million worth of machinery?
How long did it take the wood to expand water tight? Do you keep water in it all year?
0:30 cove and bead. Please compare and contrast this vs bevel
Great! but only one question: How does the water flow in the loop without a pump?
simple. hot water rise up cold water go down.
За какое время нагревает воду? До какой температуры? Какой объем ванны?
За двое суток до 50
А так ниче, прикольно
@@vjacheslavkryshun3446 С такой производительностью профессию кочегара надо осваивать и дровазаготовщика..
Есть такие же изделия, но со встроенной топкой, эти повеселее.
Одной рукой бокал с пивом держишь, другой дрова подкидываешь
Так вроде печь должна быть ниже бассейна, а не на одном уровне? Здесь получается по верху бочки - кипяток, а сразу после середины - леденая вода, которую невозможно нагреть.
Теплая вода вверх поднимается образуется циркуляция
I did lower the boiler so the warm water could rise. I have since redesigned the boiler and added a circulation pump
how is it pumping ou/in hotwater?
这个可以
There’s no way to keep the water warm when not in use so you’d need to start heating 4 hrs before you wanted to use it and then would need to sit there and feed the fire..
What kind of router bit have you used to make that round shape for wood connection? Thanks.
Hi Scott, good job ! i have a few questions, is there any pumping system? how long to heat it?
No pumping system. Thermal siphon. Google Dutch tub. Works well. I added a bigger firebox and chimney to the boiler and now it works really well. 24 hrs to heat to 105 degrees from 53 degree well water. Approx 2200 litres.
Ser gut
Бочка хороша, а вот печь внутри бочки всяко лучше внешней: эффективность выше.
Круто очень серьезно
Hi! How many time to make the water hot enough? Thanks
How many hours to build? More time than I have.
Эффективнее "японская баня", тот кто постоянно дрова "добывает" поймет меня. Ну, там как в самоваре топка омывается водой, т.е. все тепло от дров идет исключительно на воду.
What type of plastic pipe did u use to carry the water? Without a pump, does the water move fast enough not to melt the plastic ?
Braided PVC hose. Still using the original hose. Has not melted.
how to circulate the water?
Serpentina trebuia mai jos unde ard lemnele, așa durează mult timp și se consumă mulțe lemne.
In rest este foarte bine
Fill the pipes with sand to prevent kinks
Мастер
How long does it take you to heat the tub?
Added a bigger firebox and chimney to the boiler and now it works really well. 24 hrs to heat to 105 degrees from 53 degree well water. Approx 2200 litres.
wooow
Como se llama esta canción de led Zeppelin?
👍👍👍
How much heat is lost by not insulating the lines?
Just think about the thermal loss it is going to have once it hits the tub...
Good video but music is a bit dark.
triple distilled human soup
Te sale bien caro el baño amigo.
⭐️⭐️⭐️⭐️⭐️
Ещё ещё
genial el tanque pero la música...,🙈 me despertó a toda la familia....fea música 🤪
Nice soaker tub Jim, unfortunately you uploaded that most embarassing music possible to your instructional video.
Coward music
Извращение!! Наравне с выдумкой велосипеда на квадратных колёсах!!!
Воду меняй почаще и крышу надо.
Что, нормальную баню сделать не судьба, имея такую технику.
Быстро печь прогорит. Метал тонкий.
Πολύ γέλιο.
Печь очень прожорливая у дров расход огромный лучше печь длительного горения и дров подкидывать так часто нет необходимости
🇷🇺🇷🇺🇷🇺✌️✌️✌️
Pack your pipe with sand before bending it.
Толково делаеш
A little Led for the head is all I need ,
But
The Ocean by Led Zeppelin would have been better than
Babe I'm gonna leave you
Or even better
When the Levee Breaks
Or Moby Dick
Or Kashmir
Or In the Evening
Or Dazed and Confused
Or
Secular hindu sathi, hindu morcha , hindu virodhi karnarye,
Если у тебя дома целая деревообратывающая фабрика и куча свободного времени можно сделать небольшой бассейн с тёплой водой.