To the others who commented, you need LEDs that are compatible with the CANbus system that are used in Dodges. These bulbs from SuperBrightLEDs are "Error Free" for use with CANbus. That's why he hasn't had any problems. I have the same 2006 Ram and will be ordering mine from them soon.
@@Pagan71309 Yes, the interior LEDs I ordered from SuperBrightLeds (same ones he got) are CANbus compatible. They have built in resistors to keep them from Hyperflashing. CANbus systems in some cars make each system of the car communicate independently with the computer, this is the same system that tells you when you have a bulb out and such. That system does not like LEDs. You can run other brands of standard LEDs if you have a CANbus system, but you'll most likely have to wire in your own resistors to avoid issues.
I just received these bulbs today for my 03 Dodge ram 1500 and when I turn on the lights with my door closed the bulbs flicker, but they don't when I open my door. Do you know why it does that? I had to put my original bulbs back in
I ordered mine for a 2008 from the same website. They work but they stay on when they are supposed to be off and they flicker when I go over bumps. Anyone with this problem?
Don't push too hard putting the lenses back in! If they're not staying on, it's probably because the little tabs on the lens piece that grab the little nubs coming out of the main housing have been pushed apart, and you need to very carefully push them back together. It shouldn't take much force to get them to clip over the little nubs, and it should stay in without falling out at all.
Did they still worked with the clickers? I installed LED on my 2004 ram (not the same brand) and they don’t work they I click them on only when I open the doors
On the edge opposite of the mirror (or the outer edge, if you prefer), Use a small screwdriver and gently, very gently, pop the lens out from the side. I ordered these LEDs ( www.superbrightleds.com/moreinfo/miniature-wedge-base/74-led-bulb-3-smd-led-miniature-wedge-retrofit-car/228/1067/ ) for a replacement. They worked great.
Sorry , but mine work just as always. Try contacting the bulb maker directly. They may have a solution for you. Keep us posted please, so we may pass along any of your information to others who may have a similar issue.
I want to say thank you to all of that saved me tons of money by doing these videos.
Thank you very much Sir for the time you took to share knowledges.
To the others who commented, you need LEDs that are compatible with the CANbus system that are used in Dodges. These bulbs from SuperBrightLEDs are "Error Free" for use with CANbus. That's why he hasn't had any problems. I have the same 2006 Ram and will be ordering mine from them soon.
Thanks for chimming in!
So the bulbs that was ordered were CANbus?
@@Pagan71309 Yes, the interior LEDs I ordered from SuperBrightLeds (same ones he got) are CANbus compatible. They have built in resistors to keep them from Hyperflashing. CANbus systems in some cars make each system of the car communicate independently with the computer, this is the same system that tells you when you have a bulb out and such. That system does not like LEDs. You can run other brands of standard LEDs if you have a CANbus system, but you'll most likely have to wire in your own resistors to avoid issues.
@@Ifyoucantdodgeitramit What Mason said. Thanks!
This is true..
I just received these bulbs today for my 03 Dodge ram 1500 and when I turn on the lights with my door closed the bulbs flicker, but they don't when I open my door. Do you know why it does that? I had to put my original bulbs back in
Both of mine won’t go on at the same time so I have to use the old bulb and the new bulb
I ordered mine for a 2008 from the same website. They work but they stay on when they are supposed to be off and they flicker when I go over bumps. Anyone with this problem?
It doesnt take much power to turn these ON. If thats happening to you, my GUESS is you have some kind of short somewhere
Thank you sir!!
Don't push too hard putting the lenses back in! If they're not staying on, it's probably because the little tabs on the lens piece that grab the little nubs coming out of the main housing have been pushed apart, and you need to very carefully push them back together. It shouldn't take much force to get them to clip over the little nubs, and it should stay in without falling out at all.
I replaced my bulb my light still don’t come on the 1 on the left does just the right doesn’t any help
Sounds like your going to have to check to make sure the one that is NOT working is actually getting power to it or not and go from there.
@@JunkyardDogGarage918 it is the switch I have to replace it
Any problems with them not turning off?
none
Did they still worked with the clickers? I installed LED on my 2004 ram (not the same brand) and they don’t work they I click them on only when I open the doors
Mine worked
Make sure that you put the cover back on and it is hitting the switch/clicker when you push/click it
I did them on my jeep and I had some trouble getting it to line up 100% but I got it with some trial and error 👍
Why does my map lights stay on when I turn my truck off ? It’s like a really dim light that’s always on ? Anyone know how to fix
Need a resistor on the dome light
Do you have your knob turned on by the headlights?
How do you replace the bulb in the sun visor vanity lights?
On the edge opposite of the mirror (or the outer edge, if you prefer), Use a small screwdriver and gently, very gently, pop the lens out from the side.
I ordered these LEDs ( www.superbrightleds.com/moreinfo/miniature-wedge-base/74-led-bulb-3-smd-led-miniature-wedge-retrofit-car/228/1067/ ) for a replacement. They worked great.
Mine wont automatically come on when you open the doors. Do you or did you have an issues with this?
Sorry , but mine work just as always. Try contacting the bulb maker directly. They may have a solution for you. Keep us posted please, so we may pass along any of your information to others who may have a similar issue.