Emirates B777 1:400 Papercraft Tutorial (Little_Model_Airport)
HTML-код
- Опубликовано: 7 фев 2025
- How to make a boeing 777 from paper?
Little_Model_Airport template
link: www.little-mod...
1:400 scale by LMA
Hope it helps :)
Thanks for watching :))
consider subscribing it helps a lot!
#boeing777 #papercraft #airplane
Stay tuned for the next video: Cebu Pacific a330neo 1:400 with rotating gears!
Where is it at
@@avation4524 sorry i do not have time cuz of school but i promise I'll do it asap!
Can’t wait! If you want, I’ve got a channel on the same models to check out! :)
How do you the gear thing
@@modeledits878 cut it out and stick it on a thick cardboard, do it on both sides and stick in underneath the fuselage.
Every DIY tutorial should be like this and its helpfull.
thank you!
@@Mr.ynmCrafteri can’t do it
@@Srifortskill issue
Jk
Please keep posting vids like this 8 love them
Thank you! Sureness
can you tell me the settings you added while printing this because mine is so small. and can we use tape also?
i chose PAL and it looks AMAZING!
This is awesome!This helped me for my Thai A350-900. I can’t thank you enough:)
anytime! and thank you so much for supporting me too!❤️❤️❤️❤️
Wow is very Beautiful
What did you use for the tick part so the paper wouldnt bend easily, and for your cebo a330, how did you have tilting gears
just a thin cardboard like photo paper and about my cebu pacific i cut the tires from the main landing gears itself then i just sticked a thin paper to slide in the tires hope it helps!
@@Mr.ynmCrafter thank you so much 😊
@@Mr.ynmCrafter I’m subscribing
@@JaydeJAC tysm! sending hugs!🤗
i chose united and it looked great! thanks!
Sounds great! Thank you!❤️
THIS LOOKS AWSOME 🎉
Wow I made a nose perfect
Thanks for the tutorial
thank you very much for helping me make my first paper craft, this tutorial was very helpful. please making more of this content so i can also make my own airport, also, i recommend trying to show the parts more so we can see how to do it. thanks once again! ❤❤😊😊 and also remember me when you get famous!😊
@@greycell_editz I'm grateful for your kindness and for taking the time to reach out. It means more than you know! Thank you soso much for your support and encouragement!
@@greycell_editz Don't worry even if i am not famous as i am, you guys have a special place throughout this career!
Found it ymun
your welcome and thanks a lot!
and also consider to show how to make the landing gears because i’m stuck on them
my new favorite page
Awwwww thank you soooo much!! Sending hugss 🤗🤗❤️❤️❤️
Sorry if this sounds sudden but how do you make rotating gears?
PS I look forward to your next video :)
I will make a tutorial video about it. Stay tuned!
great job, i reccommend using Xbox game bar to fil your computer screen ;)
i do use it! but only for games haha might actually make a gaming channel
A question, what do you use for wing filling? The Emirates plane looked very good on you.
A thin cardboard should be perfectly fine
Ok thanks
@@AvitionMedia Good Luck!
this helped so much thx
Always Welcome!❤️
1:29 that discort sound made me open discord🤣
You earned a subscriber I love it❤
Thank you sooooooo much!❤️❤️❤️❤️
that look so easy to build 😁
its because it is!❤️
and its fun to build too!
Good tutorial, btw can you make saudi arabian a300 tutorial?
Can you do the atr 42 next idk how to build it
Also can u show step by step how you did the cockpit? cuz im new to this stuff
need that too
same
Do the a350 its easy
i love it so cool
do i use the 2 other noses and extra wheels
Nice good work keep doing that to master your craft!
TYSM
What do you mean by rolling the paper?
How did you tilt the landing gears on your cebu Pacific a330. Can u pls explain
Hello! I usually cut the gears itself then sticking a rectangular shape paper to support it and make sure its not tighten otherwise, itll not rotate and thats pretty much all😁
@@Mr.ynmCrafter I can't understand can u pls make a small tutorial I'm also a papercrafter and have a yt channel (with 1.7k subs) and if you do a tutorial it would rly help pls pls
@@AviationSpot56 sure! on a next tutorial. I will do it on my Lufthansa A340 so stay tuned! and congrats on your yt channel! sending supports!❤️❤️
@@Mr.ynmCrafter thanks pls upload the video it really helps
@@Mr.ynmCrafter btw why aren't you posting videos nowadays
Can you type the link in the pinned comment cause youtube has disabled links
i chose klm orange pride it is so AAAAAAAAAA I LOVE IT SO MUCHHHHHHH thx for the tutorial
Nicee! Now you can master it! Thank you so much for watching!!❤❤
you too!!😅
Hi what if my thick paper is very thin would it still be big and not flat? Please answer me I beg
1:45 its actually called a tail cone
hi i have been watching this video and i stumbled across a problem in the part where you atteach the wings are you supposed to cut the fuselage of the plane so the wing fits through? and also the in the enginge the last two parts i could not attach it to the first two parts because they differed in size i made a qatar airways world cup 2022 livery 777 it turned out good and i want to thank you for that please see that you may have a solution for myproblem
@@ladenscarf Hi there! Make sure to trim the wings if it doesn't fit through and if it doesn't fit any further you can cut the fuselage. And for the engine one you can use infills to put the turbine parts.
@@Mr.ynmCrafter thank you for the advice
Do you use office paper or cardstock?
regular a4 office paper
What is the size of bondpaper?
I dont have a pc or printer but couldni go to like a printer place and get this printed and it would work?
what do you expect
I did not know that the wing infill is for the wing i had no idea of what it was.😭 Also where did you get that thick piece of paper from?
Slr! wing infill is that wing shaped marks with code numbers! you can see that if you print one. I got my thick paper on a thin cardboard box u can use any thick paper like illustration board make sure it is not very thick and slightly thin
@@Mr.ynmCrafter I knew I was just confused for what it was for those pieces and now I'm building another one and I did the infills and its a lot better
How long do these usually take?
@@TheRealJazz359 about 45mins or few hours but it depends which aircraft or difficulty you choosed!
@@Mr.ynmCrafter So with that in mind, how long would this 777 take?
@@TheRealJazz359 usually around an hour. So this will take a lot of patience and efforts!
@@Mr.ynmCrafter I just started mine and I have the fuselage almost done, thanks for the advice! 🫡
@@TheRealJazz359 anytime❤️
Can u tutorial cockpit?
I don't understand the nose
Same it looks so bad
@@Axls_aviationyou try making one with no tutorial whatsoever
@@nameit2014 ok I will
@@Axls_aviationno offense to you tho
@@Axls_aviationyou have a great channel
bro, show us how you roll the paper. Mine a340-600 fuselage CANT BE ROLLED MATE.
Did you use band paper or oslo paper in the print?
Hello there! I used a regular 80-100gsm a4 office paper the regular ones! U can find it anywhere!
I accidentally use band paper I was on urban cuz we don't have any PC and printer so I go in urban to print it idk if they have a4 office there using band paper for printing
@@MD11Pal Perfect any type of bond paper as long as it is not a soft copy its great
@@Mr.ynmCrafter if it soft it will not assemble?
@@Mr.ynmCrafter and I use long band paper
Nice job❤
Thanks 😄
How do i make the nose because it looks complicated
Cool video
what are the type and gsm of papers you used?
Just a regular A4 office paper
You don't wanna use the thick paper bcs it will be hard to craft
Does stick glue work fine
@@parkersworld7752 yes! but be careful not to put too much! it’ll ruin the model.
How did you get them so big do u use normal printer paper a4?
yes a4! the regular print paper.
thanks @@Mr.ynmCrafter
Also can u pls show how to do cockpit because i didnt understand the instructions and you just went right into showing how it should look cuz im new to this@@Mr.ynmCrafter
Is it ok if i use cereal box cardboard for wings and landing gear? If yes, will it be sturdy? Im trying to make model airport
yes of course! and its one of the best cardboards to add on your infills. And yes it would be sturdy as long as it is 2-3 layers.
@@Mr.ynmCrafter ok!
@@mrbigshot123 alright❤️
Hey bro, I thought it was really cool, what paper did you use? A4?
Yes the regular office one
Btw do u have a link for the a320 cebupacific sharklets?
yes ofcourse! by what scale?
1:500 drive.google.com/file/d/1EByJX7vQIwPmi8kLBaa4EPQiAIpP2S5L/view?usp=share_link
1:400 drive.google.com/file/d/18tG3yr8B5bffbrH3IfqtOhMUsRLFVoG5/view
@@Mr.ynmCrafterthank u po
Also the old livery
@@masotan152 sadly theres no a320 version of the old livery but theres a a319 version check it out drive.google.com/file/d/1Dy6TylITzB1wLSnV7sEczPFeu9h8CsOH/view
Thank you!
Welcome anytime! May i know what plane are you building?
@@Mr.ynmCraftera large boeing 777 from emirates expo 2020 livery😅
@@ElCarrizo4939 good luck! Hope this video helps❤️❤️❤️
@@Mr.ynmCrafterand I have a question, could you do a tutorial on the landing gears? Please
@@ElCarrizo4939 you'll just need to cut it. You need to be very careful bcs it's quite fragile cause its small after you cut it you'll glue it into a thin cardboard like a cake box or anything. Then let it dry and stick it onto the wings
good job making the emirates 777 But one question: how do you make sure the sheet is printed correctly? When I try to extract the file, it always appears in poor quality.
If the paper is a4 the template always need to be a4 in size and you need to have a good quality printer
ok thanks I will take that into account 👍🏻
@@Mr.ynmCrafter its not the printers problem though, the printing preview in browser is the problem. Some of the words and stuff (for liverys) are bad quality unless i zoom in
@@Mr.ynmCrafter btw could you do a tutorial for the tilted landing gear?
Just a question, how do I do for the stick?
You must cut the fuselage first then get a stick (any optional stick) use it to roll the fuselage like so. Hope it helps:)
@@Mr.ynmCrafterThanks! I will try
By the way where did you bought your glue
can you put batterys as weight
Yes as long as it fits!
i have a question. I have no glue tabs, how did ya get the glue tabs?
u can use any regular glue like paper glue you don’t need glue tabs
I made my own by drawing it out.
I have a question. How did you roll the nose? Because i dont know how to make the nose rolled!
If you print one you'll notice the cutout parts, copy how i cutt the nose and glue the cutout part roll it and glue but if u still don't get it go to little-model-airport.com/ they have a step by step instructions
Thanks! I didnt notice the cutout part in the other nose😅
plzzzzzzz, i beg to youu... plzz make a full course
Can you do the sams but with 1:500?
Yes
What glue did you use?
Regular paper glue
How did u make the nose?
Is it edible?????
What do you mean edible?😅
Sorry but my printer is broken😔
I couldn't build the engines, can you show me how you did it? please this will help me
you can start by rolling the engine cut marks. Do it just like the fuselage make a tube out of it and put the engine turbofan inside it and add the cone shaped part. if you want a clearer instructions you can visit www.little-model-airport.com/tips-for-assembling for more instructions ☺️ hope it helps!
Oh i think i can do it i guess 😢😢😀
Im trying to do it too ,but i just cant get the nose right
Nice
Do you for some reason know how to make Papier Avion by Airigami 9G models? (It can be helpful for me :) )
I do! But I don't usually make airigami models i just think it isn't very realistic
Hopefully ill make one in the future
Can you do a tutorial on A320
Sure soon!
is this model flyable?
nopr
Yes just throw it out the window in da wind and fingers crossed it will fly
No
Probably not
@Nothingherelol-n no you 🦍
Can you do a tap air a330 please
Surness soon!
@@Mr.ynmCrafter how did you put the nose part?
@@jameionsaveukraine1109 i glued and shaped it like so:)
can you do 777 300 er etihad plz
You deserve 1k+ subs
tysm
@@Mr.ynmCrafter continue the good work
how can i build nose?
Exactly
Hey, so i make planes with tape, they look horrible,and idk how to make landing gear, just a question,Could you tell me how to make the landing gear?, and how old are you
Hey there! I suggest not making planes with tape such as clear, mask or any other tape use glue instead it will make it a lot better, and for the landing gears all you have to do is to cut it and stick it to a slightly thick cardboard not too thick. And wait to dry and stick it directly underneath the fuselage and the nose. Hope it helps! And for my age just try to guess😅
@@Mr.ynmCrafter12, but also i dont have glue, tape is my only option, sadly, could u try making a video of you making one with tape?
@@TayKEditz I don't really think so bcs i usually does it with glue but ill try and also ur soo close at guessing my age!❤️
Is it okay with tape😅😅
@@GeldanProductions13 itll ruin its look so i advice to use glue or adhesive instead😊❤️❤️
@Mr.ynmCrafter ok
Can u do Philippine Airlines A350?
i actually already have one printed i might not build a tutorial on it but i’ll probably just do a showcase
My wings were to loose even if I added glue to the fueslage😢😢😢
Just pls can you make the graphic quality better for the video
I see nothing wrong with the resolution? You can always adjust the quality on the top right corner of the video!
Ok thnx
Guys what is the web site please 🙏
@@Aviation_Gaming31 www.little-model-airport.com
Can you do a a380 one bc I printid it idk how to do it but thx I did my Saudi 777 thx
Thats hard like a a380 nose😢😢😢
😂😂😂sério
Adonde se encuentra emitares
on the boeing selection, you can check the website for more liveries!
I dont understand how to roll the nose, and the step by step tutorial on the site doesn't help me.
If you print one you'll notice the cutout parts, copy how i cut the nose and glue the cutout part roll it and glue them together if u printed the b777 you’ll have two options for the nose if you don’t understand the nose that i cutted just cut the other nose its much easier just glue them together and roll
Nvm,I just found out.
Can you do tap air a330 please
Pidanle ayuda a sus padres
Vietnam airlines Boeing 777-200ẻ
The glue I use is hot glue but when I did my Saudi 777 my engines touched the ground
The pylon is on the wrong side 😊
Ummmm...... Really that hard ok😢😢😢
it just need time and effort. for more instruction please visit www.little-model-airport.com/tips-for-assembling
For me, just practice
What if i don't have a 3d printer 🖨️
You dont need a 3d printer to print the template regular printer should be fine.
Hola
Hola
How long do these aircraft take to make? Also do you think you could show me how to make a fuel truck? :)
About 6-10 hrs. I could do that next time i print ground service equipments so stay tuned!
Can you please make Boeing 747-8F I am trying like for weeks but I can't make one
Sure soon!
ok
My problem is that small parts like tires and engine i can't cut them out perfectly and i can't cut the planes parts out right
I cant make it my printor is out of juice
you can wait for the next time your printer will be refilled with inks if you are using inkjet printer!
@@Mr.ynmCrafter yeah
@@Mr.ynmCrafterI GOT SOME MORE JUICE FOR MY PRINTER YEEEAAAS
@@Timmygodcrafter YESSSS LETSGOOO!
what is the point of this? The only hard part is how to assemble and glue but you don't even show it
It took me like 20-30mins to assemble each part and if i show it all this video would be separated into parts and i wanted it to be a short video. Anyways, I am very sorry if you do not understand
Its okay but rn when am typing this am still trying to do it i managed to make the cockpit and the fuselage but the back tail and the cockpit doesn't fit to glue to the plane @@Mr.ynmCrafter
i managed to glue them now it looks good am going to still see ur tutorial thanks@@Mr.ynmCrafter
@@ageaviation Great Lemme know when you finished working on it hope it'll turn out well sending support❤️❤️❤️
I didn't make it sadly idk the dimensions are different or my printer is bad the thing you put under the fuselage was almost taller and bigger than the fuselage its self anyways though ur tutorial was good i am just bad and my printer messed up@@Mr.ynmCrafter
It's so hard😢
ikr? it literally took me almost 6+ hours of work
Ip ip izzz cooking
It didn’t give me the longest shit.
The body
@@LucioAdelaide it’s okay u just gotta make sure everything is perfectly aligned! and no need to stress out😅
@@Mr.ynmCrafterI agree👍