Dixell XR60CX Controller full Parameter Details
HTML-код
- Опубликовано: 20 окт 2024
- Dixell XR60CX Controller full Parameter Details
Cooling controller with defrosting management and fan control, HOT KEY, without sensor: The XR60CX is a device for front panel installation for normal and low temperature applications with three relay outputs for regulating the compressor, fan and defrosting process. These regulators have an NTC/PTC input for recording the room temperature as well as an evaporator sensor for defrosting. The regulator also stores the minimum and maximum temperatures. These can be viewed using the arrow keys. This device also features a configurable digital input. Easy programming via a “hot key”. The regulator has a TTL interface and is Modbus capable. These models can therefore also be connected to XWEB logging systems.
More Parameters more safety for your machine.
Very good,, information and your way to teach is also very nice and easy
आप sir बहुत ही अच्छे से हिंदी में समझा रहे है। प्लीज मैं चाहुंगा कि आप eliwel caral, danfus। और सभी पर विडियो बनाए।
Thank you sir thank you for everything very very helpful this video
Bohath khoob Masha Allah
how do i get to AC? Anti-short cycle delay? i know its in PR1. also to the OdS (Outputs activation delay at start up). im stuck at the Hy parameter
Very nice sir 👍 thank
Good
Thank you sir ❤
How to change defrost setting?? My open chiller not stop compressor. Thanks
Watch the video from 16.15min you will get all Defrosting settings.
Very nice 👍
I have 3 door reaching freezer model S-72 F some time temperature goes 20 -30F I think of parameter setting please advise thanks
Bro... Compressor running but defrost sign alwways blinking why.. How to reset
Defrost sign blinking means it's Dripping time . Change the Fdt parameter set 2mintus.
@@uniquetechnicalservice sir plese give me whatsapp number
. Im here with unit.. I need to fix this now...plses help me
Freezer on kartye hi compressor and upper fan on ho jata hai
2 ya 3 minutes ka delay karna hai
Wat. Is ptc. Wat is ntc
ruclips.net/video/gmx-tdpWKII/видео.html
When start the controler solinod is blinking.. What is the reason and how to fix this problem
Solinod is blinking ? Where is it blinking in Display,?
@@uniquetechnicalservice yes display
How to activated fan.. Digital is Showing only compressor
In Fnc folder select O N setting.
For freezer which mode need?
O N is better for freezer allso. Need air circulation in all the time and defrosting time fan will be in off condition.
But this mode fan not activated in digital
Ok then can you check FST set point. Fst means fan stop temperature. Increase that set point above 30 Degree
Showing H2 erorr ...what is the reason
P2 -Evaporator probe failure.
Modebus mapping
Fen aaor hitr dono chalo krna hi
No
Nice can make one vedio carel thermastat if you give your mail I'd or whats up number. I will send carel model