100% (MX Q Pro 4K) Android tv box restart hung on logo issue fix
HTML-код
- Опубликовано: 25 янв 2023
- MX Q Pro 4K is a very low price Android TV box. It cost usually around 15 USD!!
The only issue it restarts or stuck on the logo since the CPU is ARMv7 and the RAM is not more than 2GB.
And please subscribe!
www.youtube.com/@befix?sub_co...
Netflix hi-res and RUclips 4K will generate a restart or black screen.
The fix for this is in my video. Just spend 2 dollars on the heat sink and 2 dollars on a PI fan from Aliexpress.
Heatsink - www.aliexpress.com/item/10050...
Fan - www.aliexpress.com/item/10050...
From all the solution of the internet only this one works. Thanks again.
Please share this for better reach
@@befix will do
Very helpful.Thanks!!
Glad it was helpful!
Anyone know to use an external SD card as internsl storage on this thing? The menus for this appears to have been excised from my unit as the OEM passed it off as a "128GB" device.
Very useful! Question what I will do if the clock repeatedly is wrong?. When it does you can't use the WiFi to watch RUclips or Movies.
You can set the date and update date and time from internet ON using setting - system preferences - Date and Time.
Thanks
Welcome
I did the toothpick thing ti reset bit it dies.not work it keeps on being stuck on the logo or it shows blank please what can i do
RESET will never work. Please use the procedure from my video. I am using this box for 1 and half years now and it never gave me any issue after the fix.
My box has the exact board as this one. It says it has 4gb 32gb specs which I don't think is true. I wanted to change the firmware as the one it has is too slow. I found a suitable ram but after a successful flash, it doesn't boot up. Do you have a solution to this problem? Thank you.
Hello @Simon Elijah, you should probably try a stock ROM. XDA has it here forum.xda-developers.com/t/rom-official-7-1-allwinner-h3-mxq-pro-4k-5g-stock-rom.4251469/. Thanks
@@befix Thank you for your response. I'm wondering if this is the right firmware for my box as the board is written MXQPRO_V73 2021-06-19 with an RK3128H processor.
@@simonelijah5513 Ah! So yours one seems the same as mine. It is a rock chip CPU. Please try this link - forum.xda-developers.com/t/help-need-firmware-for-mxq-pro-4k-5g-rk3228a-with-wifi-esp8089.4488563/. Best regards and please make sure to subscribe!
@@befix I have downloaded and flashed the rom in this link but the results are the same: successful but no booting- only black screen.Thank you for your assistance.
Have you tried resetting? Inside the AV jack there is a button. Power off the box and press the button and then power on and release. There should be a wipe screen on the monitor. Or some logo in your case.
Si le cayó virus como se hace
Pena que não em português 🇧🇷