UPGRADING A BMW M4'S AUDIO SYSTEM
HTML-код
- Опубликовано: 26 авг 2024
- Watch as I install and Audison Prima plug & play system into this BMW M4.
These systems are designed specifically to fit into BNMW and Mini factory locations. I personally love these systems as there is zero modification required to the original fixings or wiring. As a lot of new vehicles on the road are leased, this is perfect as it can be uninstalled without a trace.
I've tried to capture as much as I can of the installation, however, as It's just me here doing both filming and the installation itself, keeping in mind that this was completed within a long day, there was a deadline so I've sacrificed some of the filming over rushing parts of the installation. These are things such as some sound treatment and the tuning process once the amplifier/DSP was installed.
Typically with the installations I carry out, they're tailored systems to the customer's vehicle, requirements and budget. However, these systems work so well so it's always an option I make the customer aware of with a BMW.
Thank you for watching.
FOLLOW ME:
Instagram: / rta_caraudi. .
Facebook: / rtacaraudio
Website: rtacaraudio.co.uk
Thank you.
Вы поменяли мою программу жизни. Концепция моего мозга повернула в сторону прогресса. Из простых вещей увидеть реальность для определенных людей. Я делал картины, воял гравером, чпу , но вы дали то виденье. Я в шоке. Вы фантанстик. Увидел что многие не видят. Творения вам и успеха. От души русского духа благодарю. С нами бог. Разум с нами. Я не с матрицей.
I just installed 4 prima 5x7/ 2 tweeters and 2-10inch subwoofers in a custom box on my 2014 f150. SWEET!
Great Vid!!Lots of question: Is this the HK system - Option code "688" Premium sound in this car? * Is the sound deadening only installed on the inside of the door or can (would) you actually stick a piece on the back of the (magnet) speaker? * @ 2:39 your shown reaching for a tweeter door housing. Is this an OE part (without the "HK" logo) or does this come with the Audison Prima Kit? * @ 3:15 it wasn't too explicit/clear on the wiring of the crossovers. * What is the purpose of the cloth friction tape in comparison to just plane vinyl electrical tape to wrap the wiring? * What about the I.P's Center channel speaker? * You went straight to an Audison ("AP8.9Bit") DSP/Amp. Did you not need to previously install an "L2Ci" in line and/or a "Bit DMI" ("Most") module? * Have you ever heard "Maestro" (ex. "MBQuartz) speakers? Thanks!
Interested as well in answers to all of this :D
So That was really good.......
What does it sound like? 😂
yeah, really...Another "great" video :))
ooo yeaaahhh nice to see another video°!!!
Sound comprising would be nice, or even text description if this update is worth that money.
brilliant install, enjoyed that. Can we have more wiring up if possible
Amazing!
Great work mate
Thank you man!
Nice jobs.
Thank you Keng 🙏🏻
I wonder if that subwoofer makes a big difference since it looks like its using the same output. I'm in the market for a sub woofer replacement on my M4 and this has me curious.
The underseat woofers do make a huge difference over the factory ones as you're going from a 6.5" driver to an 8" driver. However, to have them working at their full potential I would always run these off an aftermarket amplifier, if installed off the factory system you will notice some improvement but it's night and day when they're amplified off an aftermarket amplifier. When it comes to presenting my customers with different options, Option 1 would be a front speaker upgrade, Options 2 would be front speakers and amplifier (I always tend to use the Audison Prima 8.9 bit or F8.9 bit to take advantage of its small footprint and built in DSP) then Option 3 would be to add the underseats. Customers have come to me and asked for a subwoofer as well before having the system installed, what I advise them to do is listen to it without one first then if they feel they want more, add it afterwards as it's straightforward to integrate it into the already installed amplifier (or add an active subwoofer with a built in amp). Once they're bedded in they do give you some genuinely surprising low end, although this is subjective to what you personally require, music taste etc, if you want to shake the car then yes I would suggest a separate subwoofer enclosure, if the goal is to have a well balanced accurate system then an additional subwoofer may not be required. I apologise for the lengthy reply! I don't know how local you are to me, but I do have a BMW system that I'm happy to demonstrate to you so you can hear them for yourself and decide which route you suits you best. Demonstrations are free of charge but need to be booked in so if you are interested just drop me an email at info@rtacaraudio.co.uk and I'd be happy to arrange it for you.
JAKE RIVERA it is Not a real woofer but a low speaker. Better than stock but a woofer extra is what you should go for in the Trunk. Than its perfekt
@@RTAFabrication That was very helpful insight! thanks. So, where would you rank replacement rear deck speakers on your list of priority? note: I will soon have a M240i so my rear deck is a little closer to my ears that it would on the M4. Also, I don't expect to ever have passengers in the rear seats so, the audio only needs to serve me. Old school thought is to forget quadraphonic sound and concentrate on great-imaging stereo. thoughts??
@@ckunstadt Save the money from the rear deck upgrade and invest in a dsp or a dsp/amp. Tune the rear crossovers for rear fill up to 3500 hz from 120-180hz. The stock speakers do handle mids well so they can easily be repurposed for this as long as the settings are available
Awesome..... I loved this.... How is the experience after that.... I would like to experience
So, better that Bavsound System?
Force a vous jolie travaille 💪🏻💪🏻🔥
What’s the full system run shipped to the U.S. cost me? 2014 BMW 535i (F10) with HiFi system currently.
At the bottom of the sub enclosures that go under the seat there is a small drainage hole, did you covered those holes when you applied the soundproof material?
Where do you buy the Sound absorber Stuff?
I can supply it to you directly. Drop me an email at info@rtacaraudio.co.uk and I'll run through the options and pricing with you 👍🏻
how did you connect the tweeter, was there a input in the woofer?
Hello! Great job! Did you use original audison wiring set like AP T-H BMW01? or custom made? Thanks.
was the hifi SA676 installed as standard? Will the OEM AMP be replaced by the AP8.9 or will the original one still be connected? Great video Greetings from Germany!
Considering there were no tweeters installed originally means there was just base audio (quite surprising on M4). The new amp replaces the OEM if there is any installed.
What’s the black adhesive stuff you put inside the door for? Is it sound dampening?
Yeah it’s sound treatment. This is 2mm and there is a 3mm version too. It makes the panel a lot more rigid and in turn reduces resonance, improves lower end frequencies and reduces road noise. 👍🏻
@RTA Car Audio
Hey I have a question.
Were the Underseat Woofers glued in the housings? Or are they really just clipped?
Thanks:)
They all have the clips but some of them are glued as well. The Audison woofers clip down into the factory clips along with the gasket that comes with it, then it's screwed into the original housing to pull everything nice and tight for a good seal 👍🏻
So in this case with the m4 were just clipped in ?
Would that system fit into E92 Coupe?
Was there any retuning because for the new amp
Very nice. Do you happen to recall the crossover points you used??
Can’t remember off the top of my head but if I can find the setup file I’ll check it and let you know. Just for fun, if you go to Audisons website and download the 8.9bit software you can install it and run it in offline mode. On the site if you navigate to the BMW configuration pages, go through it as if you had a Harman Kardon system, spec up the highest level of install then there’s a link to download a setup file which Audison have provided for that vehicle, you can open that in the software and check out all the crossover points, eq and time alignment that they suggest 👍🏻 I’ve used these sometimes as a base to start from when tuning as the time alignment is actually near bang on most of the vehicle profiles, the eq, levels and crossover points tend to need adjusting depending on the end result I’m after.
No MoBridge?
I have an e60, and what do i do if my car has basic audio(no stock amp), how do i power up the speakers from the aftermarket amp ?
i have the same question! i have g30 2017
What size are your door speakers ? @RTA
How much this this cost snd how long does it take ???
I'm very interested in having my G30 done. It's had every other possible upgrade. But not the stereo! Can you give me a price please???
I actually did my G30 530d myself.
Full retrofit of Bowers and Wilkins speakers and as it had no amp at all I used the Audison Forza 8.9.
Sound is amazing.
It’s all plug and play so very easily done
@@davetreanor5303 hi i have g30 2017 with base audio no amp but i want only sub in the trunk and amp for the sub how can i do? any plug and play option?
How much for this done on my 2020 M4 CONVERTIBLE?
Hi Mark,
If you can send me an email to info@rtafabrication.com I’ll forward the details over with a few options for you.
Thanks,
Reece
Where the fuck is sound check QQ
Are you f'cking kidding me? Changing everything, and don't show the difference between original and Audison? Dislike directly..
This wasn't a comparison video, I'm sorry that this video offends you so much.