@DINH NAM Hello I liked your idea of the propeller clock but I do not understand how to do it, I saw the documents that you left on the drive but I do not know how to do it I would appreciate it if you could explain to me since I would love to do this project
Hii Can you tell me the procedure of how to make this propeller clock step by step. Or send the video of its construction as i want to make it for my science exhibition. Please help.
How should I make a circuit to operate for a long time in the form of 12 cat sliding lights with a 9 volt battery? What type of LED should it be? 15 days - 20 days to run (10 hours per day)
I have other questin for these LED diodes must be in same position and have similar degree like on your video? Second thing is they are "conected" or white just for inscription and green for background?
@@tatotiteta just download pcb and firmware from the link below, part are used in this circuit is pic16f887, 16mhz crystal, 32.768khz crystal, 330ohm resistors, 10k resistors,4.7k resistor ds1307 rtc ic,dc12volt motor, cr2032 battery cell for time keeping, and hall effect sensor with any kind of magnet, 1n4007 diod or any kind of diode and lot of skill and 16 any kind of leds. if you ar new in electronics do not make this circuit.
@@Ziamrd yeah i just found it out a few minutes ago lol, thank you. Im not really familiar with making these. Just wanted to start with something hard. might gave up in the middle
can you upload this video by using Arduino nano and how to programme that exactly has you did the welcome and clock thing I had problems with that programming
Components for this circuit : 1x pic16f887, ds1307, 16x 330ohm resistors, 16xleds, A341 hall sensor, magnet, 4x10k resistors, cr2032 coin cell for clock & cell socket, 4x 104 pf or 0.1uf ceramic, 32.768khz xtal for clock, 16mhz xtal for pic, 2x2pf caps, 7805 regulator and 12v dc motor . and a lot of skill.
If you do not know the basics of PIC programming then you should use the available hex file to load the controller chip . I found a video tutorial here ruclips.net/video/E-lycrkZQII/видео.html
it name the Pickit2 programmer ae01.alicdn.com/kf/HTB19ciOQFXXXXbxXFXXq6xXFXXXg/PICKIT2-PIC-Kit2-Simulator-PICKit-2-Programmer-Emluator-Red-Color-w-USB-cable-Dupond-Wire.jpg_640x640.jpg
You can use these two projects. Get it here drive.google.com/drive/folders/0Bx-e-c2y8_-eY29vRzFnTXZQZTA drive.google.com/drive/folders/1GwDHBxIEnHTCalUHrn6NuutYHaEDdFq9
Sorry, the PIC code of this video has been lost, i have a similar code for msp430, you can use it drive.google.com/drive/folders/0Bx-e-c2y8_-eMmR6Uk9ZckMtZ1U
DIY led propeller clock shine led lamp and sistem off with timing 3 cm (0)0:00 (0)=3cm =number, alphabet simple working sistem flasher scala fluks circle next 1 second on,2 second off. on 1 second next 1 second off 1 second on. on 1 second 2 second off.(flasher.)
I don't, know guys where u taken like this Materials but I really like this video
This completely blew my mind 😍😍
Muy bueno experimento
Hello Dinh! how can i get to build this particular propeller clock, i fall in love with this particular design
Just a quick tip: your video is 4:3 letterboxed to 16:9, just export in 16:9 so desktop users don't have to deal with huge black borders
I have liked and subscribed your video. Please show me how did you do that.
@DINH NAM Hello I liked your idea of the propeller clock but I do not understand how to do it, I saw the documents that you left on the drive but I do not know how to do it I would appreciate it if you could explain to me since I would love to do this project
The idea is very cool, but we didn't understand the conections.
you can use by connecting the pickit 2
Sorry, I didn't see the descrition.
you are a genius
OMG that cool 😍
What happens with the sensor in the minute 1:04 you can not appreciate very well how you are placing
Can you please send me a pic of the back of the pcb.
Dude can you send somewhere screen of program or whole file of program what you used i wanna construct these clock but i am not good in programming :)
This is a propeller clock project using the msp430 processor
drive.google.com/drive/u/0/folders/0Bx-e-c2y8_-eMmR6Uk9ZckMtZ1U
Ty dude you helped me so mutch ^^
Hii
Can you tell me the procedure of how to make this propeller clock step by step.
Or send the video of its construction as i want to make it for my science exhibition.
Please help.
How should I make a circuit to operate for a long time in the form of 12 cat sliding lights with a 9 volt battery? What type of LED should it be? 15 days - 20 days to run (10 hours per day)
I have other questin for these LED diodes must be in same position and have similar degree like on your video? Second thing is they are "conected" or white just for inscription and green for background?
nice
i want what price
Awesome video! Can you share the code? I will really appreciate it
it is awesome but you must show how build the circuit on PCB and the circuit diagram
Okay srsly this video needs more views
I have made the circuit and working fine
can you tell me in detail about the circuit?
@@tatotiteta just download pcb and firmware from the link below, part are used in this circuit is pic16f887, 16mhz crystal, 32.768khz crystal, 330ohm resistors, 10k resistors,4.7k resistor ds1307 rtc ic,dc12volt motor, cr2032 battery cell for time keeping, and hall effect sensor with any kind of magnet, 1n4007 diod or any kind of diode and lot of skill and 16 any kind of leds. if you ar new in electronics do not make this circuit.
@@Ziamrd yeah i just found it out a few minutes ago lol, thank you. Im not really familiar with making these. Just wanted to start with something hard. might gave up in the middle
@@tatotiteta i will upload my video soon to show you my version of this circuit.
@@tatotiteta ruclips.net/video/Iu6wwJqyGvs/видео.html
please how can i get this kits for this project from Nigeria, Africa?
can you upload this video by using Arduino nano and how to programme that exactly has you did the welcome and clock thing I had problems with that programming
hi...can u teach me how to do it step by step?
can u make detail tutorial
make it slower! :( i want to do it
it is cool
thank you ^^
not understand clearly. can u guide slow n step by steps ?
my code and circuit the propeller clock
drive.google.com/drive/folders/0Bx-e-c2y8_-eMmR6Uk9ZckMtZ1U
ruclips.net/video/E0FYxbtmISw/видео.html
bro where to get the components please helpme
hey can you help me?
can you say the materials use it?
i need the materials, please help me
Components for this circuit : 1x pic16f887, ds1307, 16x 330ohm resistors, 16xleds, A341 hall sensor, magnet, 4x10k resistors, cr2032 coin cell for clock & cell socket, 4x 104 pf or 0.1uf ceramic, 32.768khz xtal for clock, 16mhz xtal for pic, 2x2pf caps, 7805 regulator and 12v dc motor . and a lot of skill.
one thing more , you can not set the time of this ciruit
awesome 🤩😍😍
Can you do it more clearly
I readly want to do it.
Could you please share the gerber files of the board?
please provide me full components list with detials and aurdino coding
can you explain how you used the code please?
If you do not know the basics of PIC programming then you should use the available hex file to load the controller chip . I found a video tutorial here ruclips.net/video/E-lycrkZQII/видео.html
Thank you!
eine gute sache
Sir can you provide whole tutorial
Can you show me the code, please? file.v or anything else. Thank you.
hola, disculpen alguno sabe a cuantas rpm debe ir el motor como minimo y cuales son las rpm recomendadas?
Excuse me, what's the component called U2 in the layout? can u send me the code? I'll thank u very much.
u2 is a real time clock ic. This is my project code
drive.google.com/open?id=0Bx-e-c2y8_-eX1hWZ21nRGZGY28
Hey can you help me in making a same one?
Parth Gohil may i help you
Giúp mình vụ này với, mìn muốn làm 1 cái :(
great. thank. how delete the oring led for only characters please. than.
Tutorial pls
Can You share the Gerber file of PCB of the old propeller clock?
Did you use ISP programmer for loading the program on PIC?
My old project was deleted when I format the hard drive, I will recreate it and give it to you as soon as possible.
DINH NAM Did you use ISP programmer for loading program in PIC microcontroller?
I use a pickit 2 loader module along with the PICkit 2 program
DINH NAM I mean you used a pair of thin wires which connect your laptop and PCB to load program...what's name of that?
it name the Pickit2 programmer ae01.alicdn.com/kf/HTB19ciOQFXXXXbxXFXXq6xXFXXXg/PICKIT2-PIC-Kit2-Simulator-PICKit-2-Programmer-Emluator-Red-Color-w-USB-cable-Dupond-Wire.jpg_640x640.jpg
Stark tech?
can u provide me the link of coding??
Can I have the programm using pickit 2 for school purposes please
You can use these two projects. Get it here
drive.google.com/drive/folders/0Bx-e-c2y8_-eY29vRzFnTXZQZTA
drive.google.com/drive/folders/1GwDHBxIEnHTCalUHrn6NuutYHaEDdFq9
Brother what kind of programer did you used micro C??
Do you have a code for mplab for these cause my school didn't accept a micro C.. Program..
Please
What kind of software does your school allow?
Music name plz
Chú người VN hỉ?
How to get +5v to board sir ? Idk to get supply
You use the LM7805 voltage regulator
the PIC is the 16F887 without A?
the only difference was flash memory
TY for the info! , im newbie on this...
CAN I GET THE CODE?
Sorry, the PIC code of this video has been lost, i have a similar code for msp430, you can use it
drive.google.com/drive/folders/0Bx-e-c2y8_-eMmR6Uk9ZckMtZ1U
thanks
What's the diode value ??
any diode is OK , i use Diode 1N4007
Ok thanks ☺️
Please tell me how can I solder 470uf pins ?
because 470uf capacitor pins soldering is not mentioned in diagram
Please send me picture your soldering capacitor on this email : svensoni08@gmail.com
OH MY GOD!
There's no "How" in this video. It's just show n tell.
You must download the pcb in folders and creating printed circuit boards
DIY led propeller clock
shine led lamp and sistem off with timing 3 cm (0)0:00 (0)=3cm =number, alphabet
simple working sistem flasher
scala fluks circle
next 1 second on,2 second off. on 1 second next 1 second off 1 second on.
on 1 second 2 second off.(flasher.)
Why don't you introduce your creation to the public?
its in the description
Send me code