Carbon Fibre Split Mould Lay Up. Car Wing Mirror Cover [PREPREG] [OUT OF AUTOCLAVE]
HTML-код
- Опубликовано: 20 ноя 2022
- Carbon Fibre Split Mould Lay Up. Car Wing Mirror Cover [PREPREG] [OUT OF AUTOCLAVE]
Here I layup the split mould I previously made using Xpreg prepreg carbon fibre. The results are great, leaving minimal sanding back on the split line ready for clear coat.
Products i used in this video in this step by step tutorial are -
Release Agent
www.easycomposites.co.uk/easy...
Prepreg Carbon
www.easycomposites.co.uk/xc11...
Release Film
www.easycomposites.co.uk/r210...
Breather Cloth
www.easycomposites.co.uk/r210...
Vacuum bag
www.easycomposites.co.uk/vb16...
Bagging Tape
www.easycomposites.co.uk/vacu...
Clear coat used is Lechler Macrofan hs 2000
Want to see how the mould was made? - • How to make Carbon Fib...
#prepreg #diy #epoxy
Carbonworkshops@gmail.com - Хобби
Want to see how to mould was made. Check out this video 😄
ruclips.net/video/5cMpsN_nuAM/видео.html
Hello👋 May I ask you, the gel coat uses epoxy, and the laminate uses vinyl. Is there any delamination?
Amazing surface on that finished part. Awesome work!
Brilliant work. Be awesome to see the part fitted. Thanks
Beautiful work. Next step is bonding those clips to mount to the car, the hardest part.
everytime i watch one of you videos it makes me want to try it too but i know that you make it seem way to easy. 💪
Lots of practice and patience you'll get it!
Amazing work 👍🏼👍🏼
Good work 🎉
Super la pièce 😉
c'est magnifique
Great work👍 can you please make my car ORVM cover
Would you say that the starter sets are worthwhile or are you better priced if you look for the things together?
where did you get adjustable air coupler
Beautiful work! Do you sand the part before paint or do any buffing?
Yes 240 grit before clear coat
How are you going to put the pins to install on?
what did you do for clips for fitment as I've always wanted to try wing mirrors but don't know how to get the right clips for fitting to the car
These will be bonded into position
How to attach it to the car?
How do i buy the carbon fibre?
Why is a split mold utilized here? Couldn't this have been done with non-split mold? Thanks!
Without the split the carbon part would of been mechanically locked into the mould with no way of releasing.
@@CarbonWorkshops The piece looks like it would have popped out without one. I must not be seeing something you are then! that is what I figured, thanks for the reply!
Bro can u do custom product for me
We look forward to your best wishes for the earthquake in Turkey. Please don't forget us.