eric received my turner on a saturday of last week, took it to the range on monday i can't believe what this does after adjusting turner all my shots were under quarter. what a great product.
Erik: I've got my EC Tuner Brake mounted on my .30-06 Howa (sporting barrel). I went through the process with it yesterday. At #20, it shoots under .5". I put paper out at 300 yards and shot a 1-1/4" group. Now... I realize that in the great scheme of things, this isn't the kind of group that would turn your head... but this is a 7-pound, 400-yard, elk rifle. Thanks and both of my thumbs are up.
I would like to see the original EC as a device that threads on to an existing 5/8 x 24 and allows moderator usage (suppressor). Brilliant product, Mr. Cortina!
Hi Erik--Just received your 30 cal Tuner/Brake. The concept is just fantastic, a tuner with a muzzle brake AND you don't have to have your barrel remachined. I have wanted a tuner for many years but I didn't want to have the barrel threads redone and your Tuner/Brake was just what I was looking for!! The quality is top notch! I am excited about trying this out (as soon as it stops raining)!! Great Channel and great videos. Keep up the good work!!
OK Mr. Cortina, I finally got time and conditions to do a little work. First I tried some 147 gr military crap and shot OK with adjustments to 6. Then I used “Atomic” 168 gr I bought at Perry. At position #6 I held .525@ 100. I only shot 30 rds. Lol. It works. I may find tighter groups yet but I like it already. (DPMS LAR ) Thanks. I like your videos.
A silencer version of this would have me especially intrigued. Still, I'm planning on grabbing one of these for my 6 ARC and maybe for my dad's recent fancy .308. If you plan on doing one of these in 6 mm I'd love that info.
Not too long ago, I finished building a 6mm ARC longe-range bolt gun with every intention of testing the EC Tuner brake with all 3 of the Hornady ammo offerings (Black, Match and Precision Hunter). I got 2 boxes of each and thoroughly tested everything and was shocked at how effective this tuner was. Groups using the Hornady Precision Hunter had little improvement, but the Match and Black responded remarkably well with the Black being basically 1-hole groups almost impossible to measure and the Match ammo tuning to .234 !!! I will not be reloading for this cartridge. I bought every single bit of the lot numbers I could get my hands on and will simply enjoy shooting this gun and just sell the brass since once-fired brass is an easy sell anyway.
I'm sure there are a ton of guys like myself that would love to hear more in depth detail about the C.H.BC.... Combustion... Harmonics... Ballistic (freedom seeds) concept .. or procedure. Showing the procedure on how to get low ES first.... then show the procedure of the harmonics... (seating depth). You have done well already about the seating depth... but can you show the best and quickest way to get low ES...? Thanks so much... you have GREAT STUFF... KEEP IT UP.
Just purchased an ECTuner Brake in 6.5mm for my Rem 700 in 22.250. Thanks for responding to my previous emails. Looking forward to getting my load dialed-in for my next varmint hunting trip out west this Summer. Let us know when they become available in black! Thanks again, Erik.
Received mine in the mail last week ! The candy sucker was great !! 👍🏽. Installed it as per Eric’s instructions and went out and shot a few ! The tuner does really help shrink my groups ! I am very happy with it ! Thanks EC for a great product !! 🤙🏽
I got my today I did put it on my bergara b14 hmr on 308 and firt shot when 0.7 mils up I did ajust it down 7 click and shot 3 round for grouping and I have to tell you shot basically one hole so I didn't have the courage to move the tuner open down way set up number 0 so I'm from Argentina the ammo here is pretty expensive and hard to fine I did use the hornary match ammo later on I will tryout longer shots for red stag season. Thanks for this product very impressive
I agree with the comments regarding no muzzle brake. I believe that the world is going to suppressed rifles (ok well at least Texas) and being able to use the tuner with a suppressor would be great
Not sure if you will see this Eric, but I received the stainless brake/tuner yesterday and shot it today….Wow! Tikka T3TacA1 in a 6.5 Creed…this was a really honest 1/2 MOA rifle with no problem…..setting of 4.5 and this is shooting .25” 5 shot groups all day long now….totally sold on this product….I’ll be ordering another one for my 6GT Open rifle now! Thanks for an awesome product….oh yeah, much better recoil management with this brake vs. the Tikka factory brake as well…gonna be a real hammer in PRS Production Class 🍻
WORTH IT'S WEIGHT IN GOLD! I threw it on did some load work up found a good load 144 Berger and H4350 SD of 2.4 on my magneto speed. Loaded up 30 rounds took the magneto speed off and started fine tuning.3 shot groups starting at 1 to 8. Found it grouped well at 4 and 5. So I split the difference and wow! 5 shot group @.18 inches and .22 inches. Absolutely amazing product.
@@ErikCortinaHi Erik, I recently, last week, bought a M18x1 SS black EC tuner brake throughthr Spanish dealer. Apparently, my gun barrel has a M17x1 thread. Is there a solution for it. A converter or can you do tuner brakes with a M17x1 screw thread? Best regards,
Just want to say thank you for all your effort and time to show us about reloading as your videos learned me a lot and convinced me to get my reloading setup ready for when I get my rifle.
very rarely a product works as advertised...EXCEPT THIS ONE WORKS 1000 PERCENT. BUY IT FOLLOW THE VIDEO AND SHRINK YOU,R GROUPS, BIG TIME...Thanks Eric just bought a new EC for my 338 lapua
Once you get them in black, I'll be a customer! I'm a Patreon subscriber and would have ordered one early but the only rifle I'd put one on it would look off. Another idea would be one that accepts the same threads but you can still put your own brake on. I currently use a JP Recoil Eliminator on my 6.5mm CM and it looks ridiculous but I really like how it performs on my rifle. I'm able to keep my shots in view throughout the entire shot.
Great product mate , could you please do a video on scopes and magnification needed for f class / long range shooting ? Love everything you post keep it up mate 👍 Cheers
Thanks. I'm still waiting for time to pick the ammo the gun likes and tune it. Hopefully taking her on a Nilgai hunt next year. I can attest to the brake working. She said it felt slightly more than her mini 14. No flinching and no bruising.
This is great idea browning has had similiar system on their rifles for decades but cannot add as aftermarket. Not sure how effective would be on ar systems but for bolt accurate guns could be a plus.
Got something like the Browning boss I can testify the boss works and works good my boss is on a Browning a bolt ll long range Hunter 7mag IV got it where I can shoot 150 -165-or ,175 just by adjusting the boss not the scope so I'd bet anything that break he's got will work two
Eric, So I was on your webpage last night 5/11/22 to order another tuner brake when I discovered I forgot my login password, so after going through the steps, I then discovered your purchase site either could not or did not send me a completed 'Change My Password Page', so I could not. I guess your site did not receive my payment via Venmo either. Sorry I can't pay via PayPal, they closed my account, for some unknown reason. So why cant we purchase via credit/Debit cards or why can't we purchase as a guest? Otherwise I impressed with the first brake and want to install them on all my bolt rifles now.
you should make a smaller version for the ar15, you would make a killing cause there are a lot of those rifles and a bunch of ppl who are not precision shooters but would like to have it just to get their rifles tuned in other words( a bunch of suckers who dont really need this product but would buy it anyways) XD count me in on the suckers group
I don't understand how you get better groups. The whole concept? I was shopping for a brake when I saw this video. Any help in understanding how it does this would be great. Love what you are doing and thanks for all the great videos and help!
Eric, could you do a video with and without the ec brake "brake" performance? as in how much movement, rise, recoil, the rifle has with the ec brake and nothing. thank you.
how about making the original but work on barrels smaller than .850 I generally don't like muzzlebrakes. or consider having one that works with a suppressor.
Here's everything I need to know about my E.C.TUNERBRAKE on my AR-15 BOLT ACTION 6mm ARC. * on zero, about an inch * on two, just over half inch * on four, about .360 inch " on setting six, two shots same hole, so I fired a third shot just to make sure it wasn't coincidence or luck, nope, I'm good on setting six.
Great news, having to find someone to cut my barrel for the original was a serious impediment to getting one. Have you considered offering a tuner without brake that threads on like this one? Basically an original tuner that can thread on the barrel without having to do the custom barrel work.
@@CamaroZ28Nut3 I don't understand how making that small of an adjustment really affect the harmonics that much, given how quickly the "harmonic pulse" is moving back and forth.
Excellent. Thank you sir. Looks fantastic. I have an older unthreaded rifle. Is there an offering available that "clamps" on or is it best to have a gunsmith thread the barrel? Thank you again.
I was like, why does this guy look like the guy that bosses leroy around on the Texas barnominiums Lol. So glad I found this channel, lot of great useful information I’ve seeing. Do you have a cooking channel as well so I can just cancel my cable all together lol. Hope you have a great wonderful successful 2021.
Good day Erick, Thanks so much for all the great videos and content, I'm new to the reloading scene, and have recently learned of the EC tuner. Id like to know how to get one in South Africa. (2) can it be made to fit a suppressor? As in SA, many places wont allow you to hunt without a suppressor. TIA and thanks for all the great teaching moments. Also, the threads we use , I THINK, is metric?? IDK, now clued up on this at all... My barrel is threaded, for M18/1, if that makes sense??
This has me very curious now. I'm wondering if you could machine a small part that goes from 1/2x28 female to 1/2x28 male and have your adjustment in between the two ends. It only needs to be maybe an inch long, sort of like a barrel extension but with a tuner built in. Why do this you ask? Because you can then run your favorite suppressor while still having the benefits of a tuner.
I wondered if there is any way to work up a load while having the EC tuner brake on the rifle. I understand the tuner is to help dial in a load, but I would like to use the brake to reduce recoil while finding a good hand load for the gun.
THAT IS AWESOME!!!! Love what your doing for the gun community and what a hell of a product. I will be ordering one tomorrow!! ... maybe more if i can sneak it past the wife LOL. Thanks Eric, Seriously!!!
eric received my turner on a saturday of last week, took it to the range on monday i can't believe what this does after adjusting turner all my shots were under quarter. what a great product.
Erik: I've got my EC Tuner Brake mounted on my .30-06 Howa (sporting barrel). I went through the process with it yesterday. At #20, it shoots under .5". I put paper out at 300 yards and shot a 1-1/4" group. Now... I realize that in the great scheme of things, this isn't the kind of group that would turn your head... but this is a 7-pound, 400-yard, elk rifle. Thanks and both of my thumbs are up.
I put one on my 6.5 Creed Tikka T3 Tac A1. I’m happy with it. Tuner works as advertised. Recoil reduction is excellent. Quality product.
I would like to see the original EC as a device that threads on to an existing 5/8 x 24 and allows moderator usage (suppressor). Brilliant product, Mr. Cortina!
Nice Alpha Mount on your rifle. How do you like it?
You can do this. He mentioned it in the beginning of this video, and he has a video about it.
I’m sold! Does it come with a “I neck size only” t-shirt?
Hi Erik--Just received your 30 cal Tuner/Brake. The concept is just fantastic, a tuner with a muzzle brake AND you don't have to have your barrel remachined. I have wanted a tuner for many years but I didn't want to have the barrel threads redone and your Tuner/Brake was just what I was looking for!! The quality is top notch! I am excited about trying this out (as soon as it stops raining)!! Great Channel and great videos. Keep up the good work!!
Thank you. :)
I have this basic same thing on an older Browning called B.O.S.S. (ballistic optimizing shooting system). Great shooting gun
OK Mr. Cortina, I finally got time and conditions to do a little work. First I tried some 147 gr military crap and shot OK with adjustments to 6. Then I used “Atomic” 168 gr I bought at Perry. At position #6 I held .525@ 100. I only shot 30 rds. Lol. It works. I may find tighter groups yet but I like it already. (DPMS LAR ) Thanks. I like your videos.
Just received mine the other day. I must say awesome product. Very happy with this purchase. Won’t be my last. Thanks again
A silencer version of this would have me especially intrigued. Still, I'm planning on grabbing one of these for my 6 ARC and maybe for my dad's recent fancy .308. If you plan on doing one of these in 6 mm I'd love that info.
Not too long ago, I finished building a 6mm ARC longe-range bolt gun with every intention of testing the EC Tuner brake with all 3 of the Hornady ammo offerings (Black, Match and Precision Hunter). I got 2 boxes of each and thoroughly tested everything and was shocked at how effective this tuner was. Groups using the Hornady Precision Hunter had little improvement, but the Match and Black responded remarkably well with the Black being basically 1-hole groups almost impossible to measure and the Match ammo tuning to .234 !!! I will not be reloading for this cartridge. I bought every single bit of the lot numbers I could get my hands on and will simply enjoy shooting this gun and just sell the brass since once-fired brass is an easy sell anyway.
I'm sure there are a ton of guys like myself that would love to hear more in depth detail about the C.H.BC.... Combustion... Harmonics... Ballistic (freedom seeds) concept .. or procedure.
Showing the procedure on how to get low ES first.... then show the procedure of the harmonics... (seating depth). You have done well already about the seating depth... but can you show the best and quickest way to get low ES...?
Thanks so much... you have GREAT STUFF... KEEP IT UP.
Reinventing the BOSS! These would be awesome to have, I'll wait for the black to come out. Awesome craftsmanship
It's out. I just put one on my Howa.
Just purchased an ECTuner Brake in 6.5mm for my Rem 700 in 22.250. Thanks for responding to my previous emails. Looking forward to getting my load dialed-in for my next varmint hunting trip out west this Summer. Let us know when they become available in black! Thanks again, Erik.
Received mine in the mail last week ! The candy sucker was great !! 👍🏽. Installed it as per Eric’s instructions and went out and shot a few ! The tuner does really help shrink my groups ! I am very happy with it ! Thanks EC for a great product !! 🤙🏽
I got my today I did put it on my bergara b14 hmr on 308 and firt shot when 0.7 mils up I did ajust it down 7 click and shot 3 round for grouping and I have to tell you shot basically one hole so I didn't have the courage to move the tuner open down way set up number 0 so I'm from Argentina the ammo here is pretty expensive and hard to fine I did use the hornary match ammo later on I will tryout longer shots for red stag season.
Thanks for this product very impressive
I agree with the comments regarding no muzzle brake. I believe that the world is going to suppressed rifles (ok well at least Texas) and being able to use the tuner with a suppressor would be great
EC tuner brake shows that perfection also shows physical visual beauty!
Not sure if you will see this Eric, but I received the stainless brake/tuner yesterday and shot it today….Wow! Tikka T3TacA1 in a 6.5 Creed…this was a really honest 1/2 MOA rifle with no problem…..setting of 4.5 and this is shooting .25” 5 shot groups all day long now….totally sold on this product….I’ll be ordering another one for my 6GT Open rifle now! Thanks for an awesome product….oh yeah, much better recoil management with this brake vs. the Tikka factory brake as well…gonna be a real hammer in PRS Production Class 🍻
WORTH IT'S WEIGHT IN GOLD! I threw it on did some load work up found a good load 144 Berger and H4350 SD of 2.4 on my magneto speed. Loaded up 30 rounds took the magneto speed off and started fine tuning.3 shot groups starting at 1 to 8. Found it grouped well at 4 and 5. So I split the difference and wow! 5 shot group @.18 inches and .22 inches. Absolutely amazing product.
Thank you
Going to have ordering one for my .30 today.
@@ErikCortinaHi Erik, I recently, last week, bought a M18x1 SS black EC tuner brake throughthr Spanish dealer. Apparently, my gun barrel has a M17x1 thread. Is there a solution for it. A converter or can you do tuner brakes with a M17x1 screw thread? Best regards,
Very cool device. Similar to the Browning BOSS but much more user friendly. Tune the rifle to shoot the ammo rather than vice versa.
Erik, can you add a sign up to be notified of the black when it comes out?
Just want to say thank you for all your effort and time to show us about reloading as your videos learned me a lot and convinced me to get my reloading setup ready for when I get my rifle.
I just put a deposit on my new barrel. When its ready to be shipped and I pay the balance, I am ordering an ECTuner!
very rarely a product works as advertised...EXCEPT THIS ONE WORKS 1000 PERCENT. BUY IT FOLLOW THE VIDEO AND SHRINK YOU,R GROUPS, BIG TIME...Thanks Eric just bought a new EC for my 338 lapua
That's great Erik, I'll be looking for those 3/4x24 brakes to be released.
AGREE 100%
I hope you sell a million of them Erik. Cheers.
Once you get them in black, I'll be a customer! I'm a Patreon subscriber and would have ordered one early but the only rifle I'd put one on it would look off. Another idea would be one that accepts the same threads but you can still put your own brake on. I currently use a JP Recoil Eliminator on my 6.5mm CM and it looks ridiculous but I really like how it performs on my rifle. I'm able to keep my shots in view throughout the entire shot.
I've been waiting for this! Thank you so much.
Just had my two EC tuners fitted...they look great by the way.
I just wish I had known this was coming as I would have waited.
I think EC tuner brake is a product born from the realm of Pure Genius.
Always good informative videos I really appreciate the fact that you are quick to the point and don't waste my phone battery.😂😂
Great product mate , could you please do a video on scopes and magnification needed for f class / long range shooting ? Love everything you post keep it up mate 👍
Cheers
Excellent content, Erik. Just bought one of your tuner brakes in SS. Thank you.
I'll be ordering a couple of these from you in the near future. Great video Sir and you answered all the questions I had about this brake😉👍🇺🇸
Damn that it pretty slick. Now I think I may need to get my Barrel threaded.
Just got mine in black. Can't wait to try it out!
How is it?
My 10 yr old girl can shoot her 308. Nice.
@@manuelvargas2608 That's awesome, way to go Dad! Your young lady will remember these fun times forever.
Thanks. I'm still waiting for time to pick the ammo the gun likes and tune it. Hopefully taking her on a Nilgai hunt next year. I can attest to the brake working. She said it felt slightly more than her mini 14. No flinching and no bruising.
Yup. answered all my questions. Going to check my threads and order one. And thanks for the .338 info.
Just received mine today, can't wait to try it!
Let us know if it improved or widened your groups!
Just bought one from DI precision for my Vudoo. I'm looking forward to trying it out.
Its kind of like an improved Browning BOSS system. Nice.
This is great idea browning has had similiar system on their rifles for decades but cannot add as aftermarket. Not sure how effective would be on ar systems but for bolt accurate guns could be a plus.
Chomping at the bit here...can't wait til it comes!
Fancy! David Tubbs been doing it for years
I'm excited to get one. Short of my hunting rifle, all my rifles will start getting one of these bad boys.
Cool, looks like a great product.
Got something like the Browning boss I can testify the boss works and works good my boss is on a Browning a bolt ll long range Hunter 7mag IV got it where I can shoot 150 -165-or ,175 just by adjusting the boss not the scope so I'd bet anything that break he's got will work two
Thank you Erik
Bought one. Love it. Definitely effective.
Eric, So I was on your webpage last night 5/11/22 to order another tuner brake when I discovered I forgot my login password, so after going through the steps, I then discovered your purchase site either could not or did not send me a completed 'Change My Password Page', so I could not. I guess your site did not receive my payment via Venmo either. Sorry I can't pay via PayPal, they closed my account, for some unknown reason. So why cant we purchase via credit/Debit cards or why can't we purchase as a guest?
Otherwise I impressed with the first brake and want to install them on all my bolt rifles now.
Thanks for doing this vid and I now understand it’s threading.
Will be ordering one in black when they come out
YESS just bought one ... really can't wait to see that
you should make a smaller version for the ar15, you would make a killing cause there are a lot of those rifles and a bunch of ppl who are not precision shooters but would like to have it just to get their rifles tuned in other words( a bunch of suckers who dont really need this product but would buy it anyways) XD count me in on the suckers group
Just ordered one. I can't wait to get my 6.5 prc built. Everywhere is literally all out of stock on bartlein .264 barrels -_-
Wanting one of these in black for my lapua
New subscriber to your channel. You are costing me a lot of money on gear. Long time 7mm rem shooter.
Would love to have this without the muzzle break in 5/8 x 24 threads... Please, and I would like the first one LOL
Same... one without the brake and I’d order one
Just put duct tape over the ports. ;)
Same here. Don’t need or want the brake
I’m pretty sure if you go to the website you’ll find the EC Tuner without the break. It’s probably not in stock but can be back ordered.
@@craigmcmullen231 Nope, looking for one in 5/8x24
Been checking prices for threading barrel about 125 to 150 east Texas
Will definitely be ordering one at some point.
Now when you get your pointer setup on the market,, hopefully you can then just sit home and play! The man is Driven!!
been out for 50 yrs
@@planeiron241 ,, not the way he is doing it
I so need one of these. Great stuff sir.
Haha.. Ma man! I didnt feel the need of it until this morning.
If I change my load, I assume that means I need to retune the device for the new load?
Of course, you are changing the harmonics with a new load
Yes, just make note of the setting for each load provided you will shoot the load again.
Ordered one of each. Thank you Greatly, 👍🏻👊🏻.
Sincerely,
Matthew
Awesome.. I bought a harrels but I like yours better.. lll be ordering one
“As long as you have a barrel” 😂😂🇺🇸🇺🇸
I don't understand how you get better groups. The whole concept? I was shopping for a brake when I saw this video. Any help in understanding how it does this would be great. Love what you are doing and thanks for all the great videos and help!
The tuner influences barrel harmonics in order to influence group size.
@@ErikCortina Thanks!
Looks like i need to start saving the money for one of these muzzle brake’s
Eric, could you do a video with and without the ec brake "brake" performance? as in how much movement, rise, recoil, the rifle has with the ec brake and nothing. thank you.
I want to see some reviews on this from someone without a dog in the hunt!
how about making the original but work on barrels smaller than .850 I generally don't like muzzlebrakes. or consider having one that works with a suppressor.
Here's everything I need to know about my E.C.TUNERBRAKE on my AR-15 BOLT ACTION 6mm ARC.
* on zero, about an inch
* on two, just over half inch
* on four, about .360 inch
" on setting six, two shots same hole, so I fired a third shot just to make sure it wasn't coincidence or luck, nope, I'm good on setting six.
This is awesome. Just ordered one.
Great news, having to find someone to cut my barrel for the original was a serious impediment to getting one. Have you considered offering a tuner without brake that threads on like this one? Basically an original tuner that can thread on the barrel without having to do the custom barrel work.
Waiting for him to do it too
I bought one that clamps on YEARS ago.
It was made for a specific barrel diameter.
Can’t remember who made it but they are out there....
Erik, I ordered one. I see that it works based upon your demonstrations (video) but still question why it works.
Did I miss a video?
@@CamaroZ28Nut3 I don't understand how making that small of an adjustment really affect the harmonics that much, given how quickly the "harmonic pulse" is moving back and forth.
great video, have you looked at the structured barrels ? Any thoughts on those ?
Just placed and order! Would
Love to see one in titanium
Excellent. Thank you sir. Looks fantastic. I have an older unthreaded rifle. Is there an offering available that "clamps" on or is it best to have a gunsmith thread the barrel? Thank you again.
Thanks for the information and video.
Do you think you’ll have a Titanium version in the future?
I agree I’d love to see one! Just ordered one from your page
This would be nice for my 450 Bushmaster.
Eres un chingonazooooo éxito siempre
Thank You.
Your a multi talented fella.. I like it
I absolutely love your Videos, Please do not listen to the Haters
What triggers do you use on your AR’s and how many pound do they break at
Giselle 1.5 lbs
I love the design, ordered one today, will order another if you can make 6mm
Because I need the extra 2% 🤣
Building a armalite 308 upper. I see your brake in my future. Going to use a bsf 18in barrel
Go with the 20.5” bsf barrel. Ive got one on mine and im shooting 175 grain sierra match kings with 42 gn of imr 4064 for .38” groups
Need flats on timing round peice
Since following you I've been intrigued on your tuner and muzzle brakes. How well does the muzzle brake work? I'm trying to tame my 308 down. 2:28
Waiting patiently for the 5/8-24 Black Nitride........
Eric, do I have to have the barrel muzzle end threaded?
Looking to see the ar-15 big bore threads
You must have good connections, you seem to have a lot of these tuners to work with.
I was like, why does this guy look like the guy that bosses leroy around on the Texas barnominiums Lol. So glad I found this channel, lot of great useful information I’ve seeing. Do you have a cooking channel as well so I can just cancel my cable all together lol. Hope you have a great wonderful successful 2021.
😂
Good day Erick, Thanks so much for all the great videos and content, I'm new to the reloading scene, and have recently learned of the EC tuner. Id like to know how to get one in South Africa. (2) can it be made to fit a suppressor? As in SA, many places wont allow you to hunt without a suppressor. TIA and thanks for all the great teaching moments. Also, the threads we use , I THINK, is metric?? IDK, now clued up on this at all... My barrel is threaded, for M18/1, if that makes sense??
Can you make one for a savage with 9/16 x 28 thread for a 7mm, if so how much
This has me very curious now. I'm wondering if you could machine a small part that goes from 1/2x28 female to 1/2x28 male and have your adjustment in between the two ends. It only needs to be maybe an inch long, sort of like a barrel extension but with a tuner built in.
Why do this you ask? Because you can then run your favorite suppressor while still having the benefits of a tuner.
I wondered if there is any way to work up a load while having the EC tuner brake on the rifle. I understand the tuner is to help dial in a load, but I would like to use the brake to reduce recoil while finding a good hand load for the gun.
THAT IS AWESOME!!!! Love what your doing for the gun community and what a hell of a product. I will be ordering one tomorrow!! ... maybe more if i can sneak it past the wife LOL. Thanks Eric, Seriously!!!
Would like to see a video on the next gen break