$2 DIY YELLOW FOG LIGHT TINT!!
HTML-код
- Опубликовано: 29 сен 2024
- Using spray paint to tint your fog lights yellow! This can also be achieved with headlight film, but for harder to reach areas, and lights that may not be removable, stained glass spray paint might be a better option! I have both items listed below so be sure to compare and chose whats best for you!
Krylon Stained Glass Paint : amzn.to/2IDNG5D
Yellow Headlight Film Kit : amzn.to/2p9i8h2
Check out my new Amazon Store! www.amazon.com...
Hope you enjoyed the video! Feel free to drop a like, leave a comment, follow me on Social Media, and SUBSCRIBE for more videos!!
Positive Vibes ~~
- Ben
-------------------------------------------------------------------
ADD ME!!
MY Instagram : ben_anton
JEEP instagram : Mojit_ohio
Snapchat : benanton
Sunshade : amzn.to/2NN1CPJ
BEST Grab Handles : amzn.to/2XJxVPa
Cube LEDs : amzn.to/2MN8CX6
Light up LED Ring Switches : amzn.to/2OGl8ts
ARTEC DUAL CUBE MOUNTS : amzn.to/2Ddk7HJ
Duracell Jump Pack!! : amzn.to/2qfbjYF
WeatherTech Liners : amzn.to/2QLbQ3p
CERAMIC COAT! : amzn.to/2N1MoBh
-------------------------------------------------------------------
Camera Gear//
My Camera : amzn.to/2rEzm3t
My NEW CAMERA : amzn.to/2lcrkw5
Best Wind Deflectors for G7x : amzn.to/2uo5x8V
-------------------------------------------------------------------
bodywork, car, project, rebuild, refurbished, junkyard, copart, lite brite family friendly, save money, cheap, hack, ryan mayer, 6.7 lime, giveaway
I am participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Products in the provided links are my recommendations based on honest use and experience with them
Anyone else feel like this should be a 2 min video at most!
Yes and also have u ever learned u can speed this video to be 10 seconds...just saying
Was thinking sheesh we're 7min in and he hasn't even started painting yet lol.
If you didn't have them already, yellow lights would also cut down on the "whiteness" when they're on with the tint. Just using white lights and a yellow tint on the lens won't be the full set.
awesome result!
how is it holding up after 3 years?
very cool.. this will save me lots of $$$
Maybe don’t use your fog lights if it’s not foggy
Should I spray clear coat on these?
*owns 40k$ jeep*
* cuts bumper off to save money * wtfff 🤣
Cheap like the way you cut the bumper
Mine left with fine bubbles 😟😟 i didn't remove my fogs I just tape an spray
Can be remove in I dont like it?
So you posted this a year ago, how has the tint held up over time?
You can’t get a darker yellow with bright white led’s lighting up the reflector 🤦🏽♂️
No adjustment on your lights?Fogs?I know there is...Then with bigger tires and a lift why would I need to adjust my lights ...Just paint them .....Paint them black ...It's a jeep thang
Tbh a lot of time taken for something that coulda been covered in less then 5 min
Yellow is 99 dollars a can
Only 7 minutes of blabbing to get to the project. I guess his mom told him his videos are interesting. 🥱
Product used- 5:21 Product in use- 8:21
A chad
There was like 1 minute of useful material from this video lmao
less
Lol agreed but typical jeep owner
@bernie Lopez , salty hater
6:16 for the sake time
Man you talk too much during the video! Just get done. 😎
For those of you that are wondering why it looks like greenish, it’s because the LED lights that are used in this Jeep is technically blue just like how your lights are usually bluish when you first start your car and turn on the lights. Now the only way to achieve a perfect yellow color for your fog lights are to use yellow bulbs. Not yellow tinted bulbs but bulbs that are yellow from it’s programmed chip.
Please show it again after you add the additional coats of paint!
How is the color holding out over time? I looked at the Krylon brand for stained glass and noticed it was made for "indoor decorating," so likely has no UV protection to guard against color change over time. I'd consider a more expensive outdoor automotive paint.
Buddy has no idea what overspray is.....he will tho when he puts his doors back on in the sunlight
It’s a setup, his next video will be “How to remove over spray” 🤣
Yo Ben, would have thought with you being in the tinting business you would have gone the route of using yellow tint/film for the fogs. Would give you the option of reverting back if you ever decided to. Plus my experience with spray on tinting fades over time and would need a retouch. Just my 2¢. Still, this turned out pretty good.
realy ? you still got that cut off bumper on there ?
Should of just left that stock bumper uncut. But i like the yellow
why would anyone tank the door off of their car, the mind boggles
I bet they did not stay looking that good for very long after some bug strikes and scrubbing, you have to let the paint dry overnight completely then finish it with a couple coats of clear coat with a hardener, can runs about $20 but is absolutely nesacary to protect the paint and keep it looking good for the long term.
Took a long time to say nothing.
Pro tips. Krylon makes an older model of this paint it's more amber you can still find it. Also use yellow LEDs under the yellow paint to get the yellow light you want. Krylon says it takes 7 to 10 days to fully cure. And do not do this in humidity they will look cloudy.
Cool so don't do this in Ohio ever understood
Skip to 6:40
Lmao some scum bag has 1 for sale on Amazon for $90
I just did this to my Tesla this morning just wondering did you add a clear coat? I’m thinking about it... I did 7 coats with one spray can. Thank you for the video
Yeah not on market anymore now cost 99$ a can lol use Tamiya 86042 PS-42
Can’t wait to see the video where you replace your bumpers!
yada ..yada ... yada
@Ben Anton : Does the light look greenish? In the video it looks that way. Can you please confirm? Krylon has a tangerine color as well. So, if the light is greenish, then I can purchase both the canary yellow and tangerine and do a mix of both.
Main I remember back in 2007 doing this to my fog lights with stained glass paint before films were a thing and decided a light blue tint. Equal to a 6-6500k color. Got pulled over 10 times within 6 months saying emergency colors are illegal to have on the front of the vehicle. Yet I’d see straight up blue HID kits being run on LOW BEAMS. I hen I just wanted to run the parking lights with faint blue fogs during that golden hour as the sun goes down before needing headlights. But apparently that’s illegal and people can think your an emergency vehicle. But even tho was still light enough to tell it’s a black hatchback and again not strobing OR on the top of the vehicle. 🤦🏻♂️
But after typing and seeing final product those turned out great 👊 looks as clean as a film. Nice and smooth 👌
If you want a better application. Take the lense off , paint the inside with couple of coats and then put it back and do the lens as well.
Nice vid sir! After you get it to where you want it then show a after video at night with the headlights on... thanks!!!
Lamin-x film is another cheap way to get the yellow fogs.
Thanks looking for my 2016 ram rebel
Cant' get it anymore! What else can I use?
Looks great 👍
amazon sells this product for $120 in Canada, omg
I put yellow tints on my fog lights and it's a slight positive difference. Plus it looks cool.
Why is the bottle more then $60 when it literally days $2 on your title
Seems like this chips and fades over time. Just tint them 😂
Do you need to sand them first? Another video the guy did.
Yes. Sloppy work.
Those will b great WHEN u go wheeling.
What is the brand and name of the spray paint. Thanks
Do you think this process would work for clear eye glass lenses?
Great vid man!!! Im soo doing this to my datsun 620!!! 😁
Lol same here!
Something coming in the mail...Deez nuts!
Ace hardware
Where are they
Gaz ..... 🇬🇧 UK
Thank you
I did this to all the windows in my house
So, it looks like Sunshine coming through the windows all the time
Except at night, when they turn black
Yeah don't be this guy lol.
I think you should have a piece of clear film on then spray it. That way you can change the color as you want without needing new lenses.
It comes off easily, you can wetsand with 600 or use a thinner like acetone or mineral spirits. You'd just have to polish it after
With this logic, why not just use yellow film rather than clear, and you can skin the painting process all together 🙄
Here's a pro tip. Use yellow led bulds under the yellow glass.
Pro tip Krylon says 7 to 10 days to fully cure
It nice but it won't protect from rock chip
Any idea how to remove this paint ?? I’ve done this to my fog lights a while back can’t seem to find what would take off the paint , (paint remover /, acetone don’t work
Do you have a aftermarket exhaust on your Jeep
I have rounded....oval....convex !! Yeah convex fogs and that Lamin-X is a PITA !!! Until I can afford those squadron fogs, this is the ticket !!! Awesome idea brother !!!
Why Christmas color for a vehicle? That’s temporary good idea until the rock chips peels the yellow away.
Math is not your strong suit. Stick to Jeep stuff..
Neither is jeep stuff
your math teacher must be proud.
Show them at night now 😁
THe paint that you use is it compatible with plastic lense? thinking about doing my fog lense on subaru..
thx
Has it burned off or gotten burn?
You talk to much
is your jeep your entire personality?
I wonder if they get hot, cuz that could fade the coating or melt it. Maybe. Otherwise they look great.
I bet he dropped those lights in a mud puddle just to clean them for the video to show of his mall crawler 🤣
How did it hold up?
Question. If I have a slightly blue bulb, say about a 6500k and the lens is yellow, will the light look green?
Must be sealed units....thought maybe you would paint the inside of the lens...looks awesome!...🚙💜💕
I ended up spraying 9-10
Coats hajaaj AND used a yellow led 9006 bulb!
I wish I would have seen this before getting the lamen-x stuff for our Type R! Terrific video!
How was the performance at night?
Have bad winter driving on highway so kinda interested
So, just wanted to follow up! How’s the job holding up? We’re you happy with the results and home many coats did you apply to achieve the goal? Thanks.
Also he calls this video “ 2$ diy fog light tint “ but it cost him 6.99😂😂😂😂😂
Looks great!
So I might use the extra to make my sunroof yellow, should be cool.
You forgot to sand em
Looks good, cheap good mod
Thanks bro I was afraid this spray can was not shiny at the end but now I know!
How well has this held up over the years?? Thanks for sharing!!
60 second video spread out to almost 14 minutes 🤦♂️
How is this setup compared to using yellow tint paper ? Any effects on luminosity ?
Man! I want to thank ya for this! So cool, been looking for something cheaper than bulbs! Got a screaming yellow F-1FIDDY! Thanks again! Gonna do all my rides this way👍👍👍👍!
Any update?
I've been getting flashed non stop since adding new fogs. Nice results.
How many applications?
I did the exact same thing last year to my fog lights on my GTI it looks sick I'm thinking about changing it to the orange in that paint or the purple in that paint. I've also heard from all the offroad guys that running orange fogs is better in fog and I think snow. And it looks awesome aswell..
Ronald Ciubuc how well does it hold up?
Very smart Ben
How is it holding up to weather after more than two years ?
I plan to do this to my light bar. How well does it hold up to heat?
Any videos on cutting that bumper??
Do some more coats and show the difference. Stick with the yellow though.
Looks great
Good mod, very helpful video. Might try a little orange, I agree that a darker yellow would probably give you a better contrast to the green. Thanks for sharing.
Is this safe? Doesn't it retain heat from the bulb?
was gonna buy lamin x but this is half the price.