I did the salt, and it took some off. Then I used the toothpaste, baking Soda, & vinegar solution. Voila my vintage iron is spotlessly clean! I also cleaned the interior, although I don’t use the steam feature much, stuff from my toothpaste solution had gone in the holes in the iron. I’ve tried everything to clean the faceplate, and your ideas were far and away the BEST! My only regret is not taking a before and after picture. Thanks ever so much! Have a great day!
Thanks a lot dear sir, i work in abroad this vedio as very important for me. Today i'm try to clean my madam's electric iron , this 2 of method of i follow also, its so amazing vedio of me. then i saw for my madam that how is go out the darkeness, she is so happy also.Thanks a lot❤️
The vinegar for cleaning the inside really worked on my iron. I though I might have to get a new iron because it was so rusted in the inside but this cleared it all out. Thank you!! 😊
Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.
I am flabbergasted how well this worked. After scrubbing with the paste, there burnt stuff came off but paste kind of stayed glued on and I couldn’t scrub it off. I thought that was that. Popped out quickly to buy a new iron. When I got back, I decided to try scrubbing iron again which was now cold and amazing - it’s as good as new. Thanks for the tip.
So, this works-just be warned. I'm a grown man and had to spend an hour scrubbing HARD to remove a small burnt area. My hand is acheing and I'm sweating like a pig.
Getting ready to do it now! It's an older iron but I'm not buying a new one if I don't have to. My method is usually to throw wrinkled item in the dryer again. Lol
I tried this on our heavily stained iron and it worked! You just have to scrub it vigorously, when I said vigorously - - it's really VIGOROUSLY.. 😅 It's better also to prepare quite a lot of mixture (especially for heavily stained ones) so that you won't need to mix every now and then if it's not enough and the stain is still there at first try.
@@cindym3220 I tried the baking soda/vinegar bit and it didn't work. I'm not doing the salt, it's not food, it's an iron. I read an aspirin tablet or Tylenol in a warm iron using a tweezers to rub tablet so you don't burn your fingers then wipe clean with a damp cloth, but supposedly you need to cover your nose and mouth and open the window because of fumes. To tell you the truth, oven cleaner is not something I keep on hand because my oven is spotless inside as I am a vegetarian. My hardware store said to purchase stainless steel cleaner which they said is $8. I'm tired of this, I'm expecting a gift card for my birthday. I'm just getting a new iron. It won't be as good quality as mine, but this process is over for me. I have better things to do and I have clothes to iron.
It just all depends on what type of iron you have. Some of them are a little softer than others and you could scratch it up pretty bad. So I wouldn't recommend it.
Citric acid and hot water put that in your iron then spray out and steam Same as the bottom . Place a cloth that's been soaked in citric acid and water attach it to iron leave it for half hour after turn iron on and iron old towl then remove cloth it e clean
Thanks for those 👍 advises really good and efficient hUh oray hahahah till next time buddy I appreciate your very smart tips for cleaning my iron 😉 hahahhah 🤔🙂👍
Prevention is better than cure. I have found that most people iron at too high a temperature . The steam setting on my iron has high, medium , low. Set the steam to low. I have found this setting works perfectly and I never have to clean my iron. The rule is start off at a low temperature and increase the temperature gradually. Write the settings down or keep them in a mental sock. Give it a go you have nothing to lose and hopefully everything to gain.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
I did the salt, and it took some off. Then I used the toothpaste, baking Soda, & vinegar solution. Voila my vintage iron is spotlessly clean! I also cleaned the interior, although I don’t use the steam feature much, stuff from my toothpaste solution had gone in the holes in the iron. I’ve tried everything to clean the faceplate, and your ideas were far and away the BEST! My only regret is not taking a before and after picture. Thanks ever so much! Have a great day!
Out of all cleaning hacks of burnt iron ,,,your technique is the best 👌
Thanks!
Thanks a lot dear sir, i work in abroad this vedio as very important for me. Today i'm try to clean my madam's electric iron , this 2 of method of i follow also, its so amazing vedio of me. then i saw for my madam that how is go out the darkeness, she is so happy also.Thanks a lot❤️
Happy to help!
Aa
Thanks dude! The second one worked like magic. My mom was really happy when I solved her problem. Cant thank you enough
Happy to help!🙂
The vinegar for cleaning the inside really worked on my iron. I though I might have to get a new iron because it was so rusted in the inside but this cleared it all out. Thank you!! 😊
You are welcome!🙂
I buy Fautless Hot iron cleaner in the laundry dept at Target or Walmart. 1 Oz tube lasts forever and it works great.
Extremely helpful !!! I tried the salt trick and it worked like magic and it was very fast too !!!
Happy to help!
Prevention is better than cure. I have found that most people iron at
too high a temperature . The steam setting on my iron has high, medium ,
low. Set the steam to low. I have found this setting works perfectly
and I never have to clean my iron. The rule is start off at a low
temperature and increase the temperature gradually. Write the settings
down or keep them in a mental sock. Give it a go you have nothing to
lose and hopefully everything to gain.
Wow I will try it .. thank you for this idea ❤❤❤ God Bless 🙏
@@jenessamanatad you are welcome
I am flabbergasted how well this worked. After scrubbing with the paste, there burnt stuff came off but paste kind of stayed glued on and I couldn’t scrub it off. I thought that was that. Popped out quickly to buy a new iron. When I got back, I decided to try scrubbing iron again which was now cold and amazing - it’s as good as new. Thanks for the tip.
Happy to help!
3:58 iron box clean before cleaning...
:)
Thanks
That salt trick really worked! Thanks so much!
Happy to help!
Clean iron.. something i need now 😊 good job 👌
Thanks!
The worked! Can't believe it. Thanks
Happy to help!
wow....thank you a ton
the toothpaste baking soda and vinegar worked like a charm on my iron.....
Happy to help
I used the salt method last night and it worked like a charm. Thank you so much!
You are welcome!
Are you sure?
Cos am scared
Hey. Looks pretty comprehensive.
So, this works-just be warned. I'm a grown man and had to spend an hour scrubbing HARD to remove a small burnt area. My hand is acheing and I'm sweating like a pig.
Glad it worked out for you!!
Thank you for the solution...they worked
You are welcome!
2nd one worked great for me! Thank you!!
Happy to help
Getting ready to do it now! It's an older iron but I'm not buying a new one if I don't have to. My method is usually to throw wrinkled item in the dryer again. Lol
Awesome! Good luck!!
P
I tried this on our heavily stained iron and it worked! You just have to scrub it vigorously, when I said vigorously - - it's really VIGOROUSLY.. 😅 It's better also to prepare quite a lot of mixture (especially for heavily stained ones) so that you won't need to mix every now and then if it's not enough and the stain is still there at first try.
Thanks for the testimony!!
My sponge melted :( and it didn’t work. Any tips?
@@cindym3220 I tried the baking soda/vinegar bit and it didn't work. I'm not doing the salt, it's not food, it's an iron. I read an aspirin tablet or Tylenol in a warm iron using a tweezers to rub tablet so you don't burn your fingers then wipe clean with a damp cloth, but supposedly you need to cover your nose and mouth and open the window because of fumes. To tell you the truth, oven cleaner is not something I keep on hand because my oven is spotless inside as I am a vegetarian. My hardware store said to purchase stainless steel cleaner which they said is $8. I'm tired of this, I'm expecting a gift card for my birthday. I'm just getting a new iron. It won't be as good quality as mine, but this process is over for me. I have better things to do and I have clothes to iron.
Im living for this video
Glad you enjoyed it! :)
Ooh that's so so good I love it guys.keep up the remedies for me.waawa hands pup guys too good if it
Thanks
Thank you sir for sharing your tips God bless and more power
Thank you! Happy to help 🙂
This works! The salt rub does wonders lol
Thanks for the testimony!
can we use steel wool to clean it or will it destroy the non stick plate forever?
It just all depends on what type of iron you have. Some of them are a little softer than others and you could scratch it up pretty bad. So I wouldn't recommend it.
WOWWWWWWW!!!!!!! I AM SO VERY IMPRESSED!!!! THANKKKKKKK YOUUUUUUUUUUUUUUUU
Happy to help
Little messy but effective. Works!
Awesome! Thanks for the testimony!
It works 👍🏾 both methods
Yes ma'am!
My iron stopped working with the salt method 🙄
You can also use citric acid to a kettle and boil it then rinse out with little dish soap and it be clean like new
Thank you very much I was wondering and try so much thank you very much
thank you! it really works 😁
You are welcome!
Thank you so much second way 's best 👌
You are welcome
Thank you, the salt worked
Happy to help!
Cant wait to try this. Thanks so so so much
You are welcome!
Can I use apple cider viniger?
Thank you going to try that now!
Happy to help!
Really helpful. Subscribed
Welcome to the channel!!
NEEDED THAT LEVEL 2
Does black stuff that looks like dirt coming out of an iron mean anything other than it’s dirty?
Can we use Wd40 to clean the iron plate.
I don't recommend it.
Wow it really worked
Absolutely!!
My mother has used white vinegar and baking soda.
Thanks Guy....,
You are welcome!
thank very much sir
You are welcome!
"Irons Shirt" New Achievement Pops Up' Boss Status!
I used blade scratch the the bottom is there any to get it back to original?
If you scratched it with a blade, it is probably permanent.
Good tip!!!
Thanks
It's really work..... 👍 Thanks a lot for making the video😘😘😘
you are welcome!
Which one works better the first or second one
Thanks 2nd method worked... i would suggest wear gloves with soda and vinegar...
Can we use lemon juice instead of vinegar?
What if you don't have vinegar? Is there something else you can use to clean inside the iron?
Lol buy some vinegar. It’s like 2 dollars. If not, coffee machine de-scaler will work too.
Thank you it worked
You are welcome!
Can i do this to clean my fire place i set some socks on it last winter to dry but they melted onto the metal
You can always try!
I think I found a new favoritw channel
Great to have you!🙂
Thankyou for sharing the video. It works
Yes ma'am you are welcome!
Citric acid and hot water put that in your iron then spray out and steam
Same as the bottom .
Place a cloth that's been soaked in citric acid and water attach it to iron leave it for half hour after turn iron on and iron old towl then remove cloth it e clean
Thank you so much
You are welcome!
Use a stainless steel scourer, I promise you if you scrub as hard as possible in 10 seconds nothing will be there. 👌🏾
Let me go and try it now.I came here looking for this tip
Glad I could be of service.
Thanks for those 👍 advises really good and efficient hUh oray hahahah till next time buddy I appreciate your very smart tips for cleaning my iron 😉 hahahhah 🤔🙂👍
Happy to help🙂
Can you use apple vinegar?
Update: You can!
only white toothpaste has a gritty texture for this type of cleaning
Such a good video
Thank you!
Warm iron, spray plate with oven cleaner, leave on for 20 minutes, wipe off with cloth.
IS THE IRON PLUGGED IN WHILE R CLEANING?
Prevention is better than cure. I have found that most people iron at
too high a temperature . The steam setting on my iron has high, medium ,
low. Set the steam to low. I have found this setting works perfectly
and I never have to clean my iron. The rule is start off at a low
temperature and increase the temperature gradually. Write the settings
down or keep them in a mental sock. Give it a go you have nothing to
lose and hopefully everything to gain.
Wouldn’t you want to flush out the vinegar with clean distilled water before you actually use it again?
Sure, if you feel it's necessary then by all means. :)
Perfecto
Thanks
Love it 💖
Glad you enjoyed the video!
Wow gina try dis out
:)
It stopped working… it is not taking current even
Will this work non-stick irons?
Yes sir
It would have been nice to see you use it on the actual burnt iron not the brand new one to see it actually work...
You must not have watched the video because I did clean a dirty iron. Check out the thumbnail👍
Good
Heat the iron and wipe it with paper. Easy!
BET 🔥
I want to see you clean the dirty iron!!!
I did in the video 👍
Amazing
Glad you enjoyed the video!
Colgate and what?
Colgate, baking soda and vinegar
Thank you
You are welcome!
Why show all of that? 😎
What a intelligence
Next video in ten months
I hope not
Clean With Confidence lol I was jk. Btw can cover up tips on cleaning with stain on it. Stain like a blood, food or oil. It will be very helpful.
lol yea I know. I do have those videos on my list to make. Thanks for watching!
saved mmk 25000
thank you so much
Arif Aiman .
Lolz
I don't' have Colgate!
You talk too much
Ha ha ha your a de da de, but that was good video, thanks
:)
😱😱😱😱😱😱