CCR Training Flojet BIB Pump

Поделиться
HTML-код
  • Опубликовано: 31 дек 2024

Комментарии • 25

  • @natefidalgo7625
    @natefidalgo7625 4 года назад +3

    Alot of this applies to also bartending soda gun equipment as well so really taught me how to fix this equipment. Or be prepared to fix such equipment or gain the experience/ hands on to fix such equipment. One or the other now its not so difficult to understand whats going wrong is it spitting syrup because its out of co2 , or is it spitting flat soda / selizier water because its out of soda syrup....etc and time for the bag and the box to be switch out. Or did the pump go or chiller/cooling unit go and your getting warm liquid.... all the things you got to think about while troubleshooting.

    • @paulbunyun4479
      @paulbunyun4479 3 года назад

      whats soda syrup? on a fountain or bargun system you have 2 systems, the soda system with the carbonator and the syrup system with the syrup and the pumps these two systems will than mix at the nozzle. co2 is common to both.. break it down make it easy

  • @la2stl
    @la2stl Год назад +1

    Steve, how do I change a Pepsi hose connector to a Coke connector?

  • @Blade-420
    @Blade-420 Год назад

    very interting! the BIB pump looks really easy to change out in the event of Failure.
    is there a different type of pump used for a certain resturaunt chain that still use Figals?

  • @petersolod2662
    @petersolod2662 Год назад +1

    Before I do all that do we turn co2 off

    • @Iam_jardow
      @Iam_jardow Год назад +2

      He disconnected the c02. Won’t make a diff if it’s off or on

  • @roz4747
    @roz4747 Год назад

    Could I rig this to transfer oils?

  • @natefidalgo7625
    @natefidalgo7625 4 года назад

    really nice explanation on servicing these pieces of equipment though you probably should have got a little more into showing some of the components , co2 tank/refills . You more focused on the bag in box and pump/motor side of the equipment.

  • @jennifergeil953
    @jennifergeil953 6 лет назад

    Mountain berry blast Powerade on the fountain machine has a hole in the bag .
    What can I do ?
    Is it even possible to fix ?
    Please any help
    Thank you

    • @paulbunyun-xi9by
      @paulbunyun-xi9by 5 лет назад +1

      need to get a new powerade and get rid of the mice eating a hole in your bag

  • @searcy95
    @searcy95 7 лет назад

    If your in operation how do you keep from syrup spraying everywhere ?

    • @zeroumashi2947
      @zeroumashi2947 7 лет назад

      you detach the syrup inlet line first, the co2 goes through and acts as vacuum on the syrup. If you detach the syrup and co2 inlet you won't have syrup spraying everywhere.
      I honestly think an electric syrup pump is better because you don't waste co2, which means you refill the co2 tank less often cutting back soda cost.
      which means increased profit.

    • @drumrinmor9811
      @drumrinmor9811 Год назад

      Pinch offs

    • @estebangaltes8637
      @estebangaltes8637 Год назад

      Disconnect co2 and flavor. Then put pump inside a trash bag or bucket and take out line off so it spray in the bag or bucket. Pinch off could damage hose.

  • @balurammeena2968
    @balurammeena2968 7 лет назад

    Orange soda kese bnate he Sir....

  • @paulbunyun-xi9by
    @paulbunyun-xi9by 5 лет назад

    your dont take power off the pump its not electrical, you remove the pressure

  • @wellingtonbasden5400
    @wellingtonbasden5400 6 лет назад

    My soda bib just continues to run out the soda what can i do?

  • @EnergeticWaves
    @EnergeticWaves 8 месяцев назад

    ok

  • @heytodd53074
    @heytodd53074 5 лет назад

    Wes!!!!!!