Honda Accord euro 2009 2.0 R20A3 just cleaned out whilst ignition on position 2 and weight on gas peddle so butterfly is fully open/closed. After clean, disconnect battery for 15 mins, reconnect with all lights and radio off, go to ignition positon 2 for 2 seconds, then start car, run at 3000rpm for 5 mins or until fan kicks in, and throttle position relearn is all done, set ready to go. Idle rock steady and running sweet 👌😙. This teaches ECU the adjusted position of throttle after it has been cleaned
Very well done, very professional. I have a honda CRV 2015 4wd im getting 18l/100k very bad fuel consumption, my friend have the same car he’s getting 10L/100k, i have changed air filter only and i wanna know if i should take it to mechanic or should i clean the MAF and the pcv valve first! Is there anything else i can look it!! The car has 68000k.
hey, watching here in philippines, can i ask something? where is the location of power steering fluid reservoir ro fill and atf reservoir to refill. thanks
@@GarasiFelixDan thanks, what is that plastic sensor just downstream of the throttle body on top, I forgot the name of it? Did that need spraying too with electrical contact cleaner? Also did you lose much coolant
Yeah better to remove the complete assy. Otherwise you also can clean without removing the whole unit just spray it with cleaner and a brush. But then after that you might want to rev the engine out so it burnts all the dirty residue out of the combustion chamber.
Hi boss I have got big questions.i had changed fuel injectors no1and 2 now my engine have problem again exactly like before change the ejection 1-2 .do you think I have to change 3and 4 Engection??! Regards Ram From Newcastle
@@GarasiFelixDan yes mate agree with .you are a legend Absolutely legend .I did that in Honda dealerships and they said number 3 is bad and the 4 is not very well that’s why they going to change bought .will be all 4 injectors brand new .hopefully be last for ever .🙏cheers boss
Hi, Felix. When you disconnected the coolant hoses running to the TB, did you experience any coolant leaks? Or is it necessary to bleed the air out of the radiator? I'm planning to do this service on my 2015 xtrail. The backside of the TB is pretty hard to reach. Thank you.
yeap theres a small coolant hose on the TB. Once disconnect you will get small coolant spillage. You dont need to bleed the coolant just refill it after the TB service.
www.ebay.com.au/itm/144329508146?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=eIqf63AtS1O&sssrc=2349624&ssuid=lJeLIxTEQY2&var=&widget_ver=artemis&media=COPY maybe try this link.
at what miles was this done and whats your opinion on the shops that will spray cleaner into the intake which cleans throttle and engine from carbon by burning it off? i have a 2016 crv ex and 72000 miles on it..i bought it used so i am not sure the care it had..i do get a rough idle while stopped at lights and so i flip the headlights on to increase the idle..not sure if its just a honda quirk or a dirty issue...otherwise she runs good. thanks for your advice.
i cant remember at what milage but it was higher than 60000kms. It is fine if you use spray cleaner into the throttle body. give it a go it might eliminate the rough idle.
Setelah cleaning throttle biasanya kan harus di learning ya om, pernah coba learning throttle secara manual gak om di honda crv bongkok ? Klo pernah boleh share dong 😀
Relearn nya bisa lewat obd ecu. Ataupun bisa dengan cara manual saja nnti setelah 5 sd 10 menit mobil dijalankan komputer ecu mobil nya bisa menstabilkan TB nya tersendiri.
Apakah sebelum bro bersihkan Throttle body baterenya sudah di copot?? Kalo belum coba di copot baterenya dahulu selama 10 menit dan kemudian pasangkan kembali baterenya ini untuk me reset ecunya. Jika sudah lakukan copot batere dan problemnya masih ada maka coba tahan gasnya pedalnya pada saat mesin nyala di 3000rpm selama 3 - 5 menit. Terima kasih.
@@GarasiFelixDan The fact of the matter is that there is no such tool. Where I live, there are no special services for Honda. If the throttle does not work properly, then I have nowhere to go to fix it.
Hi boss, can advise my crv SWA model after do engine valve adjustment, when in cool engine start, the rpm will go down below 500rpm after press the brake and in Reverse gear ? The rpm not consistent in 750~800 I had clean the TB and EGR valve and it still the same issue
@@GarasiFelixDan All the spark plugs are new, and there's no error code, the pcv valve is located at where ? I had ordered 4pcs of new plug coil, when arrive will change it
@@GarasiFelixDan Ya, just check with Google, I had change the new PCV valve already, the rpm is still unconsistent too, is any other sensor will affect this issue ?
Om itu kabel merah di +aki kabel power audio yaa?? Jalurnya dari mana yaa? Saya rencana mau pasang subwooofer sendiri tapi belum dapet cari lobang untuk tarik kabelnya dari kabin ke aki. Mohon pencerahannya om 🙏
disconnect battery for 10 mins let it idle for 15 mins & drive it slow for 10 mins so the ecu relearns properly so you get the best performance out of it.
Horas Medan, bung Felix. (liat di aki ada nomer BK nya hahaha). BTW, kenapa kabel negatif aki dilepas ? Bukankah tindakan ini akan menyebabkan gangguan pd komputer nya?
@@GarasiFelixDanno error appear but i just want to know only the location of iACV somebody told me that i need to check or clean that part to have better idle.
Luqman Hakim . Kemungkinan besar crv nya mengalami kerusakan pada salah satu sensor di mesin . ECU komputer mobil harus di diagnosa mengunakan obd reader untuk mengetahui lebih pastinya.
Charles Fortinez it is also fine not to remove the Throttle body . You also could just spray the TB plate with the cleaner and wipe it gently with rag becareful not to force open the TB plate.
@@GarasiFelixDan thanks for sharing the video. If you don’t remove the TB then how would you clean the other side of the plate as well as the manifold behind it?
The ecu will relearn by itself. Make sure you disconnect negative battery prior performing this service. Just give it a couple of mins warming up the vehicle. This car had no running issue and idle 100% perfect after the service.
Has anyone try this app for throttle reset or relearning via bluetooth OBD2? play.google.com/store/apps/details?id=tjsapps.throttle.reset&hl=en Suggested video: ruclips.net/video/jHQkKBdZbPs/видео.html
Honda Accord euro 2009 2.0 R20A3 just cleaned out whilst ignition on position 2 and weight on gas peddle so butterfly is fully open/closed. After clean, disconnect battery for 15 mins, reconnect with all lights and radio off, go to ignition positon 2 for 2 seconds, then start car, run at 3000rpm for 5 mins or until fan kicks in, and throttle position relearn is all done, set ready to go. Idle rock steady and running sweet 👌😙. This teaches ECU the adjusted position of throttle after it has been cleaned
perfecto 🙏🏼🙏🏼👍🏼👍🏼
Greetings from London. Thanks to your video gained the confidence to clean my TB on my 2013 mk4 crv. Cheers
you r welcome .
Thanks, dealer told me it needs to be done, but 170 for it, I think I can do that myself
Very well done!! Nice editing, good camera angles!
cheers
I checked my Honda civic 2015 at 85k miles, but very clean already.
wonderful so you dont need to clean it like mine 🤭😂
Very well done, very professional.
I have a honda CRV 2015 4wd im getting 18l/100k very bad fuel consumption, my friend have the same car he’s getting 10L/100k, i have changed air filter only and i wanna know if i should take it to mechanic or should i clean the MAF and the pcv valve first! Is there anything else i can look it!! The car has 68000k.
Yes definately clean maf sensor and pcv. Also id recommend if you can clean the Throttle body aswell.
Is it necessary to clean the IACV for that kind of engine? Can you also make a video of it?
you definately you can clean the IACV. Unfortunately i dont have this car anymore .
Electrical contact cleaner only
hey, watching here in philippines, can i ask something? where is the location of power steering fluid reservoir ro fill and atf reservoir to refill. thanks
this particula one dont have , its got EPS system not by power steering pump.
What were the symptoms before the clean and the difference experienced after? Regards
Before cleaning the car hesitates to accelerate effecting the MPG. After cleaning the car response much better and restores car mpg.
@@GarasiFelixDan thanks, what is that plastic sensor just downstream of the throttle body on top, I forgot the name of it? Did that need spraying too with electrical contact cleaner? Also did you lose much coolant
Is it necessary to pull out the whole throttle body everytime for cleaning?
What's the torque spec of those bolts?
Yeah better to remove the complete assy. Otherwise you also can clean without removing the whole unit just spray it with cleaner and a brush. But then after that you might want to rev the engine out so it burnts all the dirty residue out of the combustion chamber.
Hi boss
I have got big questions.i had changed fuel injectors no1and 2 now my engine have problem again exactly like before change the ejection 1-2 .do you think I have to change 3and 4 Engection??!
Regards Ram From Newcastle
better to scan the ecu which ones have issues.
@@GarasiFelixDan yes mate agree with .you are a legend
Absolutely legend .I did that in Honda dealerships and they said number 3 is bad and the 4 is not very well that’s why they going to change bought .will be all 4 injectors brand new .hopefully be last for ever .🙏cheers boss
Sounds like the streets of somewhere in the Philippines?
Bud E we have similar environment in Indonesia hehe
Can I slowly push the butterfly valve open to clean it and without disconnecting the battery?
Thanks.
no i would not recommend. As you might damage the TB assy.
Are you supposed to remove the whole thing or just spray it while running the engine?
either way r fine , you can choose which ones are the easiest for you to clean.
Hi, Felix. When you disconnected the coolant hoses running to the TB, did you experience any coolant leaks? Or is it necessary to bleed the air out of the radiator? I'm planning to do this service on my 2015 xtrail. The backside of the TB is pretty hard to reach. Thank you.
yeap theres a small coolant hose on the TB. Once disconnect you will get small coolant spillage. You dont need to bleed the coolant just refill it after the TB service.
@@GarasiFelixDan thanks bro. Much appreciated. Have a wonderful day
You should use a torque wrench my friend
Hi, Felix, do you know where I can buy this same, new, aftermarket throttle body? I have struggled to get it on Amazon or EBay. Please help.
www.ebay.com.au/itm/144329508146?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=eIqf63AtS1O&sssrc=2349624&ssuid=lJeLIxTEQY2&var=&widget_ver=artemis&media=COPY maybe try this link.
Thanks Bro Felix, video yg bagus. Sangat membantu.
Sm sm brother
@@GarasiFelixDan Bro Felix, Setelah cleaning throttle body perlu idle learning lagi?
@@HeruTjahjadi kalau rpm naik turun harus. tp jika tidak, tidak perlu setting idle learning.
at what miles was this done and whats your opinion on the shops that will spray cleaner into the intake which cleans throttle and engine from carbon by burning it off? i have a 2016 crv ex and 72000 miles on it..i bought it used so i am not sure the care it had..i do get a rough idle while stopped at lights and so i flip the headlights on to increase the idle..not sure if its just a honda quirk or a dirty issue...otherwise she runs good. thanks for your advice.
i cant remember at what milage but it was higher than 60000kms. It is fine if you use spray cleaner into the throttle body. give it a go it might eliminate the rough idle.
Fuel consumption is better after clean?
definately :)
Hi, Please do you know where the fuel filter is located on this vehicle? I need to replace it and i can't find the location. Thanks
its built within the fuel pump unit.
@@GarasiFelixDan Can it be cleaned if i get the fuel pump out?
@@shawlix yes ofcourse
@@GarasiFelixDan Thanks. Will let you know how i get on with it.
Hello, is this the same engine that comes in a 2012 Honda Stepwagon DBA-RK1? If so, what year is the Honda CRV you are working on?
im not sure if its uses the same engine, but can look at the manual book to confirm.
R20A fuel efficient as well?
yea definately better fuel milage.
I just want to ask if after cleaning, should be idle needed to relearn? Or not?
dont need to .
Setelah cleaning throttle biasanya kan harus di learning ya om, pernah coba learning throttle secara manual gak om di honda crv bongkok ? Klo pernah boleh share dong 😀
Relearn nya bisa lewat obd ecu. Ataupun bisa dengan cara manual saja nnti setelah 5 sd 10 menit mobil dijalankan komputer ecu mobil nya bisa menstabilkan TB nya tersendiri.
Is that the fly by wire type
Its Drive by wire (electronic throttle control).
Om, mengatasi rpm idle naik turun setelah throttle body dibersihkan bagaimana yaa??
Apakah sebelum bro bersihkan Throttle body baterenya sudah di copot?? Kalo belum coba di copot baterenya dahulu selama 10 menit dan kemudian pasangkan kembali baterenya ini untuk me reset ecunya. Jika sudah lakukan copot batere dan problemnya masih ada maka coba tahan gasnya pedalnya pada saat mesin nyala di 3000rpm selama 3 - 5 menit. Terima kasih.
Thank you great video!
No probs.
Do I need after I cleaned the choke, to make its adaptation?
Yes clean the choke plate and Throttle body barrel.
@@GarasiFelixDan Adaptation using a computer need to do?
@@romanvaliev160 if you have the tool . Yes please do it for accuracy setting.
@@GarasiFelixDan The fact of the matter is that there is no such tool. Where I live, there are no special services for Honda. If the throttle does not work properly, then I have nowhere to go to fix it.
@@GarasiFelixDan thanks for answers
Hi boss, can advise my crv SWA model after do engine valve adjustment, when in cool engine start, the rpm will go down below 500rpm after press the brake and in Reverse gear ?
The rpm not consistent in 750~800
I had clean the TB and EGR valve and it still the same issue
have you check the spark plug and coil pack? have you clean PCV valve? do you have any error codes (EML) .
@@GarasiFelixDan All the spark plugs are new, and there's no error code, the pcv valve is located at where ?
I had ordered 4pcs of new plug coil, when arrive will change it
@@mongeesan6662 i have post video on this engine R20A1. do you have k24a engine or the r20a engine ?
@@GarasiFelixDan Ya, just check with Google, I had change the new PCV valve already, the rpm is still unconsistent too, is any other sensor will affect this issue ?
@@mongeesan6662 maybe disconnect the battery for 10 mins to reset the ecu let see if thats fix the problem.
Great video 👍
Thank you.
Glad you enjoyed it
Om itu kabel merah di +aki kabel power audio yaa?? Jalurnya dari mana yaa? Saya rencana mau pasang subwooofer sendiri tapi belum dapet cari lobang untuk tarik kabelnya dari kabin ke aki. Mohon pencerahannya om 🙏
Iya btul mas. Itu ad karet kabel ecu ikuti dari firewall chassis nya
@@GarasiFelixDan tembusnya dekat evaporator ya om?? Dari kabin apa aja yang harus dibongkar ya om??
@@sofianomsof2870 laci glove box bongkar. Di bawah kipas ovaporator btul mas.
@@GarasiFelixDan okee makasi banyak om 🙏🙏
@@sofianomsof2870 laci glove box bongkar. Di bawah kipas ovaporator btul mas.
I have crv 2009 automatic my gas pedal is hard to press do you know how to fix it
Have to remove it first and find if dirty.
@@GarasiFelixDan do you have a video how to remove it
@@PokuzFoint1982 i dont have .
Can someone guide me what to do after cleaning the TB my crv consumed more fuel.
disconnect battery for 10 mins let it idle for 15 mins & drive it slow for 10 mins so the ecu relearns properly so you get the best performance out of it.
@@GarasiFelixDan Than you Dan, I’m doing it now. i’ll update once it done.
@@GarasiFelixDan Hello Dan, Thank you so much! perfectly work! I just followed your instructions. 🍻🍻😊
@@dondimartin6235 No problemo. 👌
change engine and cabin filters
Thanks A Lot Sir
no worries sir
Where is the idle air control valve in that engine?
i cannot remember ..
How to clean the throttle body hondacrv207
do you mean 2007 Honda CRV ?
What year honda CR-V does this work on
07 to 12. With honda engine code r20a1 and r18a1
do i need relearn the rpm?
if your rpm goes higher after the TB service yes it needs to be relearn.
Before clening engine have problem ?
Throttle response was very slow.
can you advice my car enging have virbrate when air comp. working and round 750 rpm (changed spark plug & air fillter) thk.
@@degdee3247 check if you have a weak motor mounts ??
thank you
Horas Medan, bung Felix. (liat di aki ada nomer BK nya hahaha). BTW, kenapa kabel negatif aki dilepas ? Bukankah tindakan ini akan menyebabkan gangguan pd komputer nya?
Supaya mencegah adanya korslet di komputer mobil sebaiknya di copot aebelum start pekerjaanya.
Is this engine reliable
yeap its a reliable engine.
@@GarasiFelixDan is this reliable like honda 1.5 ivtek engine in honda city sedan
@@GarasiFelixDan is honda 5 speed automatic ( torque converter) in crv 2013 to 2018 reliable
@@anubhavredhu0121 very similar yes
@@anubhavredhu0121 yeap as long as the prev owner regularly service the car should be a good car to buy. 👍🏼
Do it need to be relearn?
Nope just let it idle for 5 mins
@@GarasiFelixDan mine starts to fluctuate not in idle but in deceleration after release the gas pedal.
@@richardamancio drive it for a while . It should relearn it self.
@@GarasiFelixDan the PCM need to reset and idle relearn is needed. This will happen if the valve is pushed open.
Merci !!!
Thank you Dan.
No worries .
After cleaning do you have check engine light problem?
All good no problems here. If you have check engine . Please check any connection make sure they r plugged back in.
Sorry buddy but it is absolutely recommend that THROTLE BODY CLEANER be used on a throtle body.
Okay sir.
Is it because there is a sensitive sensor after the throttle body?
Do where is the location of 2nd clutch sensor for this car?
Im not sure. Sorry bro.
Hi hello mr. Dan, can you please help me to locate where is the iacv of honda crv 2011?
@@sher12346weng need more info . What engine code does ur car have.
@@GarasiFelixDanno error appear but i just want to know only the location of iACV somebody told me that i need to check or clean that part to have better idle.
@@sher12346weng i mean what typenof engine doesnur car have is it R series or K series gasoline engine?
Apa penyebab crv 2005 rpm nyampek 3000 ter sendad sedad
Luqman Hakim . Kemungkinan besar crv nya mengalami kerusakan pada salah satu sensor di mesin . ECU komputer mobil harus di diagnosa mengunakan obd reader untuk mengetahui lebih pastinya.
Some crv model need to be reset after doing this activity....
ah i see what you mean.
3000 RPMS for 5 mins
Thanks
No problem
is it ok not to remove the throttle body in the engine?
Charles Fortinez it is also fine not to remove the Throttle body . You also could just spray the TB plate with the cleaner and wipe it gently with rag becareful not to force open the TB plate.
@@GarasiFelixDan thanks for sharing the video. If you don’t remove the TB then how would you clean the other side of the plate as well as the manifold behind it?
@@mr.tuckers2848 im afraid you have to remove the TB completely to clean the other side of the plate
What about throttle adaptation and you forgot to clean IACV .
Dont worry about TB adaptation. It should relearn by itself by driving for an hour or so .
Job incomplete where’s the idle relearn?
The ecu will relearn by itself. Make sure you disconnect negative battery prior performing this service. Just give it a couple of mins warming up the vehicle. This car had no running issue and idle 100% perfect after the service.
disconect them horn s in the cars
cant do it mate its a culture thing here
Video title supposed to be HOW YOU SHOULDN'T CLEAN IT...
If your going to say this, then explain why.
Has anyone try this app for throttle reset or relearning via bluetooth OBD2?
play.google.com/store/apps/details?id=tjsapps.throttle.reset&hl=en
Suggested video:
ruclips.net/video/jHQkKBdZbPs/видео.html