hay bud, little tip for removing frozen screws. put a fillips bit on a soldering iron, hold it in place for a few seconds and heat the screw really hot then use a regular screwdriver to remove it. similar to what you did with lower risk.
Love this build Phil. Came out fantastic. Was also great to see you repurpose all those parts and not just buy new stuff. I add 5+ points on for cutting down on waste, 5+ points keeping it budget friendly and 10+ points for how well it came out. 🔥🔥🔥 120/100 A++
This is one of the best looking cars from wltoys and it demands a brushless conversion but with the original tires.Excited to see your video but wish you'd take it to the rough terrain. It could be an interesting rift like rock bouncer. The price however can be high for this conversion... Maybe if they wltoys do it.
these remind me of a 2 seater fireteam .this always seemed a bit slower than the 428 replacing the lower front suspension damper links with extra internal spring dampers(thoose cheap blue ones like use on wpl ,works well on front suspension and i think looks cool (the main thing)
I have both 12428 and 12429, the 12429 is indeed a lot slower than the old 12428. My son and me drag race them, all stock ESC and motor. I think the ESC set up is different.
the receiver of wltoys looks like a 4 ch receiver but it is a 2 ch receiver the other 2 ch are reverse because there are no reverse switches on the transmitter they have it made so that if you put the servo or the esc in another ch it goes backwards
Nice one mate, I took my 124016 and paint It the body panels white and fitted some tires and wheels around the same size as the ones in the 12428 with some white paint on the words of the tires, I took the rear wing off AND fitted some rear and front bumpers out of a 144001, It looks kinda like a bastard child from a fireteam 🤣🤣🤣 but I like It 😁
I ❤ the look of this Phil. Great wheel/ tire selection. I’ve always said wheels and tires can can totally transform any car!😀 I really thought you were going to put a 2845 mor in it . This 3650 still did an except job! Nice running car!👍🏻👊🏼😀
Hola Mr tom como estas , no se porque cuando aceleras a fondo levanta una de las ruedas delanteras , pero en general esta bueno el cambio de motor para mas torque ,saludos y gracias por tú video , querem9s regalo Mr no tenemos carrito para jugar en la casa ,se acabo la plata😅🤣😂😆
I know this is an old video but is that the body/panels that come on it? If so I'd love to find one. Almost reminds me of the 30°N body on their petrol buggy.
Es muy refrescante volver a ver viejos coches por el canal y más si es para hacer una mejora del coche de stock. Recuerdo que dediqué bastante tiempo en transformar el 12429 a crawler, y lo cierto es que se manejaba muy bien entre los rastreadores verdaderos. Te propongo esa nueva transformación, que será muy divertida de ver. Un placer darte un gran like Phil.
If I recall correctly, with the 'reverse' issue on the WLTOYS receiver, you use the other pair of pins on the receiver, so instead of CH1 and CH2, use CH3 or HC4
Thank you buddy to bring my old model 12423 want to see what can you do to faster ,my still original just 550 motor lost alote power and not been doing much about,bit you'r one come out nice 🙂👌
I wish they made 1/8th scale truggy specific hoons to fit the kraton 6s the Team corally line up and also the fireteam The only options out there is the sweep racing road crushers and the jetko tyres which I don't mind but we need more options in the hobby But I like the look of the build The hobao caged buggy or truggy street build would be awesome
Chuck a sensored system in there and I bet that would crawl well, tyres obviously. But the ground clearance is good the articulation is good might be a tiny bit top heavy but I reckon it'd do well.
i neaerly did a brushless one of these a couple of years back but did not in end, thought if i wait long enough you will do it might have a driver figure that would fit well little solder type 4" tall
I think this car in it stock form is great for its price - imagine if they put better brushed combo in it - then the price should go up OR they will try to go "cheaper" it other parts and places (it would be way more sad, I think🤭).
Fun looking buggy to drive from the looks of things. I like the mix of independent front suspension and then the solid axle at the back. Would be great fun with the stock tyres just bashing about in some woods and over some rocks I imagine! Looks a bit of a pain to work on with all those screws and plastic mind.
Buy this model and after using it 3 times began to fail (we didn't force it or use it more than with a battery charge at time) The symptom was that the car only started after pushing it, after having reviewed everything that could be I concluded that it was an engine field, disassembled it and welded the coils again and solved!... PS: I already bought the brushless motor upgrade kit, waiting for it to arrive from China (in 1 month) 😉
I had a Fayee that looked like that chassis design. 1/12 scale. Very very slow. Broke in less than 10 minutes of use. I've since used the suspension and transmission on different custom builds. What you have done here looks amazing.
Great video! My favorite part of this hobby is the building. Taking an old model and re imagining it and just rebuilding it is the most fun of all. Easily one of my favorite channels. Great work!
FTX SUPERFORZA, 1/7 STREET BASHER. MUSTANG BODY... IN BLUE. 👌 👍 It looks to be on a stretched version of the DR8 platform...👍 👍 That's all I'm saying.!!!
That's one of the things I love about the hobby. Take a car that not great, add another that's not great, have a bit of a tinker, and make something better. Awesome. 😎👍🏻
This car ist good looking but its junk. Its a pain two change parts, its driving horrible, the screws are made of chewinggums, the electronic lasts for two drives, espacially the servo ist way to weak and the diffs are cracking if you're putting a stronger Motor in it. I just kept the tyres and have thrown the car in the trashcan. I'm sorry for wltoys but this has been my first and last. By the way its nice to see your old content and how you improved.
Phil, HOW DARE YOU keep your RC's as a RC RUclips creator and use an older RC to build your dream RC, (creating a really great video) instead of just giving them all away (shipping included) Who do you think you are m8 huh? It doesn't matter you left your career to do RUclips full time. That you buy a lot of your own RC's and use your RC's for more than just one video, NOOOO! You should give them all away and once you do that, I'll comment that your family only needs one car! What's next? Your home of course, you look rugged, I'm sure you love to camp, right? So you should move your family into a tent and give your home away. Your shop? Why didn't you ask, yeah you can continue to pay for it but let someone else use the space. Stranger: Boy it seems like you want to see Phil homeless and not able to continue to create videos Oi, who asked you? And what if I do? Hey you have 2 shoes and that's selfish m8, you need to give 1 away Stranger: well my pants have 2 slots, as I have 2 legs and 2 feet, if I only have on 1 of my shoes, I would be walking around in a shoe and a sock, I'd look ridiculous and it's winter so I'd get sick Wait a minute, ARE YOU SAYING YOU HAVE 2 SOCKS! Stranger: yeah, look I have 2 🏀⚾, you're welcome to lap them. That's not very nice Stranger: well it's still nicer than you harassing Tomley, so my offer stands End scene.
poor wee cat! LOL! nice build! at least you had everything that you needed and didn't have to order any extra parts. as far as the cat's name...i call mine Heyu..short for "Hey You!! Get off the couch" "Hey You!! off the bed"....you get the idea...see you in the next vid!! cheers.
Yeah awesome buggy bro, i got one of these a week ago and its so good that im getting a 2nd one end of this month,im in South Africa and i cant seem to find a full 12 scale driver to put in it online lol, but i think on the 2nd one ill put wider wheels on and upgrade the shocks and ajustible steering rods on both, but the brushed motors will remain, brushless is too fast because i want to crawl with them also and only in and around my yard and i hate crashing and rolling them so not too much speed for me thanks, i treat them like i treat my real car 😜, btw i enjoy ur rc videos thanks bro, peace from South Africa ✌
This is funny because I had paddles on my rockbouncer & took them off & put 17mm gti street tires on it lol I got the adapters & just wanted to see if they fit ok as I’m writing this you just said paddles on this haha I couldn’t keep the front end on the ground on the beach but they are great for backflips lol
Bro I'm just letting you know I'm a big fan of your channel you have really good content and a lot of it keep it up man definently my number one channel for rc!!! #usa
I've wanted this one for a while...I got a WL toys for my first rc car, can't remember the model (the green one with the role cage). This one looks like it would be fun.
I got one of those and added a body capable of holding two 6 inch figures and now your giving me some ideas especially those shocks. I swear mine was faster than yours.
The best good looking wltoys I've ever seen.
I agree… looks even better up close
hay bud, little tip for removing frozen screws. put a fillips bit on a soldering iron, hold it in place for a few seconds and heat the screw really hot then use a regular screwdriver to remove it. similar to what you did with lower risk.
Yes that’s another way 👌
I just got the brushed senton. It handles so well. It's getting a brushless today. Such a nice platform
Noice 👌
I got Yosemite Sam driving mine. Crazy guy done broke off the light bar!
😅
Super cool! Great build!
Love this build Phil. Came out fantastic. Was also great to see you repurpose all those parts and not just buy new stuff. I add 5+ points on for cutting down on waste, 5+ points keeping it budget friendly and 10+ points for how well it came out. 🔥🔥🔥
120/100 A++
I had just finished saying out loud, that would look great with paddle tires and then you said it. Great minds think alike.
I’m surprised it’s not a Barbie car… Just kidding friend. 😂 We are all in it for the fun of toys. Good day then.
Haha
Looks awesome
This is one of the best looking cars from wltoys and it demands a brushless conversion but with the original tires.Excited to see your video but wish you'd take it to the rough terrain. It could be an interesting rift like rock bouncer.
The price however can be high for this conversion... Maybe if they wltoys do it.
Maybe a bit of crawling and off road next time 👌
Really like this one Tomley... Nice build man. As you said, Would be good to see it with paddles.. Take care mate, MQ4
Such a good build.
@TomleyRC1.. Do you have a number I can call you by?
Nice!! you git, I'm doing a desert buggy project and you beat me to the upload!!!! good work man 👍🍺🇬🇧
Nice car 😃 i love it.
Cheers dude
These things are amazing I have the 12428s and love them.
Fun little creative project!
these remind me of a 2 seater fireteam .this always seemed a bit slower than the 428 replacing the lower front suspension damper links with extra internal spring dampers(thoose cheap blue ones like use on wpl ,works well on front suspension and i think looks cool (the main thing)
Yes, a 2 seater Fireteam for sure! I love the look of the front in this
"Because of the scale we've gone for... Buzz Lightyear's cat"
😎👌
Good job 👍🏽👍🏽👍🏽
Awesome build Phil! I love the way it look’s. Please throw some paddle’s on it and take it to the beach 🏝️
Yes… maybe a revisit in the Summer 🤘
I've been trying to order this white RC for years but it's never in stock?? 😊 👍
I have both 12428 and 12429, the 12429 is indeed a lot slower than the old 12428. My son and me drag race them, all stock ESC and motor. I think the ESC set up is different.
the receiver of wltoys looks like a 4 ch receiver but it is a 2 ch receiver the other 2 ch are reverse because there are no reverse switches on the transmitter they have it made so that if you put the servo or the esc in another ch it goes backwards
Didn’t know that 👍
Like the style!hate the driving performance, enjoyed the transformation though!
that looks awesome bud, can't work out how it was so slow to start with but sure did ok after 👍
It was so slow 😅
Put shorter shocks on it and heavier diff oil in the front.
POLLY'S STYRENE!
Polly’s what? 😅
@@TomleyRC pre-coffee comment. I cannot be accountable. 😆
🤣🤣🤣🤪
POLICE TIEREEN
Fantastic, Phil! Really well done! 😃
WLToys should make it a bit easier, though! Other than that, amazing car!
Stay safe there with your family! 🖖😊
Cheers dude. Yeah, never easy taking these things apart!
Nice one mate, I took my 124016 and paint It the body panels white and fitted some tires and wheels around the same size as the ones in the 12428 with some white paint on the words of the tires, I took the rear wing off AND fitted some rear and front bumpers out of a 144001, It looks kinda like a bastard child from a fireteam 🤣🤣🤣 but I like It 😁
You can easily swap forward/reverse on that wl reciever by using the other connections. Same for steering
😂 yeah, I figured that one out after tearing apart my transmitter, and manually swapping the wires...
@@dwaynewilliams3077 exactly what happened to me 😅
And councillor Murray isn’t gonna give you a medal for it 😂
Amazing :)
I ❤ the look of this Phil. Great wheel/ tire selection. I’ve always said wheels and tires can can totally transform any car!😀 I really thought you were going to put a 2845 mor in it . This 3650 still did an except job! Nice running car!👍🏻👊🏼😀
Yeah a little big in the motor… but plenty of torque 😅
Hola Mr tom como estas , no se porque cuando aceleras a fondo levanta una de las ruedas delanteras , pero en general esta bueno el cambio de motor para mas torque ,saludos y gracias por tú video , querem9s regalo Mr no tenemos carrito para jugar en la casa ,se acabo la plata😅🤣😂😆
I know this is an old video but is that the body/panels that come on it? If so I'd love to find one. Almost reminds me of the 30°N body on their petrol buggy.
Es muy refrescante volver a ver viejos coches por el canal y más si es para hacer una mejora del coche de stock. Recuerdo que dediqué bastante tiempo en transformar el 12429 a crawler, y lo cierto es que se manejaba muy bien entre los rastreadores verdaderos. Te propongo esa nueva transformación, que será muy divertida de ver.
Un placer darte un gran like Phil.
If I recall correctly, with the 'reverse' issue on the WLTOYS receiver, you use the other pair of pins on the receiver, so instead of CH1 and CH2, use CH3 or HC4
Thank you buddy to bring my old model 12423 want to see what can you do to faster ,my still original just 550 motor lost alote power and not been doing much about,bit you'r one come out nice 🙂👌
Yes, was a good little project for me… the original one was really good when it came out
Ive had 2 of the green ones. Im with you on wtf is going on with the speed, i think its gearing
I wish they made 1/8th scale truggy specific hoons to fit the kraton 6s the Team corally line up and also the fireteam
The only options out there is the sweep racing road crushers and the jetko tyres which I don't mind but we need more options in the hobby
But I like the look of the build
The hobao caged buggy or truggy street build would be awesome
Truggy Hoons would be awesome 👌
Definitely like the idea of sand paddles. Next time you go beach it would be cool to see how it runs
Yes definitely 👍
Chuck a sensored system in there and I bet that would crawl well, tyres obviously. But the ground clearance is good the articulation is good might be a tiny bit top heavy but I reckon it'd do well.
Yes they do crawl pretty good with the diffs locked up 👌
i neaerly did a brushless one of these a couple of years back but did not in end, thought if i wait long enough you will do it might have a driver figure that would fit well little solder type 4" tall
Yes, it’s is the 3rd Brushless one I’ve done I think… and the best looking for sure 👌
Excellent stuff! LOve it Mr Tomley sir, the driver MUST be a smurf! Pappa Smurf preferably.
Papa Smurf for sure 😎👌
Mad (Translation) Crazy. Like button energized. Algorithms agitated.
😎🔥
I think this car in it stock form is great for its price - imagine if they put better brushed combo in it - then the price should go up OR they will try to go "cheaper" it other parts and places (it would be way more sad, I think🤭).
Yea, that’s very true
I almost bought this one but it looked cool seemed meh
What do you do with your cheap electronics? I like to make everything rc and am always looking for electronics.
Yeah, Me too...can make some very quick light boats with stuff laying around
How dare you! 😂😂 That thing is awesome, BTW!
Haha. Cheers dude
This broom has had 17 new heads and 14 new handles 😂. So how the bloody hell can it be the same car ????? 😂😂😂😂
Haha
If you spray that box down with spray paint it will disappear. Boom! Environment saved!
Fun looking buggy to drive from the looks of things. I like the mix of independent front suspension and then the solid axle at the back. Would be great fun with the stock tyres just bashing about in some woods and over some rocks I imagine! Looks a bit of a pain to work on with all those screws and plastic mind.
Yes these are pretty fun off road in stock form
Bro... what is the blow torch you are using?
Portable gas soldering iron kit... Most hardware stores should have them.
Buy this model and after using it 3 times began to fail (we didn't force it or use it more than with a battery charge at time)
The symptom was that the car only started after pushing it, after having reviewed everything that could be I concluded that it was an engine field, disassembled it and welded the coils again and solved!...
PS: I already bought the brushless motor upgrade kit, waiting for it to arrive from China (in 1 month) 😉
I had a Fayee that looked like that chassis design. 1/12 scale.
Very very slow. Broke in less than 10 minutes of use.
I've since used the suspension and transmission on different custom builds.
What you have done here looks amazing.
Don't the body have a capo ace 1 feel to it? It's almost identical
Great video! My favorite part of this hobby is the building. Taking an old model and re imagining it and just rebuilding it is the most fun of all. Easily one of my favorite channels. Great work!
RIP Legend. #kb43 #hoonigan
That's a sick build. It reminds me of the 10th scale ace capo. Where did you get those hoonigan stickers?
Yes, looks just like the Capo. They are from the Hoonigan store. Links in the description
@@TomleyRC sweet, thank you
This was the Vaterra Twin Hammers knockoff?
Yes 👍
FTX SUPERFORZA, 1/7 STREET BASHER.
MUSTANG BODY... IN BLUE. 👌 👍
It looks to be on a stretched version of the DR8 platform...👍 👍
That's all I'm saying.!!!
That's one of the things I love about the hobby. Take a car that not great, add another that's not great, have a bit of a tinker, and make something better. Awesome. 😎👍🏻
Brilliant Phil, great job buddy. Looks epic. John
This car ist good looking but its junk. Its a pain two change parts, its driving horrible, the screws are made of chewinggums, the electronic lasts for two drives, espacially the servo ist way to weak and the diffs are cracking if you're putting a stronger Motor in it.
I just kept the tyres and have thrown the car in the trashcan.
I'm sorry for wltoys but this has been my first and last.
By the way its nice to see your old content and how you improved.
Awesome build. I want to do more builds like this. P.s. Buzz Lightyear’s cat has a name. It is Sox.
I've built a VRX Octane/FTX outlaw similar to this it's my on road track monster an handles so good around the track
Came out nice 🎉
Phil, HOW DARE YOU keep your RC's as a RC RUclips creator and use an older RC to build your dream RC, (creating a really great video) instead of just giving them all away (shipping included) Who do you think you are m8 huh? It doesn't matter you left your career to do RUclips full time. That you buy a lot of your own RC's and use your RC's for more than just one video, NOOOO! You should give them all away and once you do that, I'll comment that your family only needs one car! What's next? Your home of course, you look rugged, I'm sure you love to camp, right? So you should move your family into a tent and give your home away. Your shop? Why didn't you ask, yeah you can continue to pay for it but let someone else use the space.
Stranger: Boy it seems like you want to see Phil homeless and not able to continue to create videos
Oi, who asked you? And what if I do? Hey you have 2 shoes and that's selfish m8, you need to give 1 away
Stranger: well my pants have 2 slots, as I have 2 legs and 2 feet, if I only have on 1 of my shoes, I would be walking around in a shoe and a sock, I'd look ridiculous and it's winter so I'd get sick
Wait a minute, ARE YOU SAYING YOU HAVE 2 SOCKS!
Stranger: yeah, look I have 2 🏀⚾, you're welcome to lap them.
That's not very nice
Stranger: well it's still nicer than you harassing Tomley, so my offer stands
End scene.
Great video. I'd be interested to see the speedrun potential with some castle electronics. You know you've got some, The cat is called Sox
Yes, not sure Sox would survive a Castle set up 😂
@@TomleyRC that’s a fire video still. Sox at 120+ “too infinity and beyond…”
@@chrislang7460 😅
Enjoyed very much! Thanks
Cheers dude
poor wee cat! LOL! nice build! at least you had everything that you needed and didn't have to order any extra parts. as far as the cat's name...i call mine Heyu..short for "Hey You!! Get off the couch" "Hey You!! off the bed"....you get the idea...see you in the next vid!! cheers.
if your changing wheels, i'll be interested in them wheels for my twin hammers if 1.9" 12mm hex format @Tomley
Tomley hi, i have a question.... Does it worth to get a 12429 or you think i could get something better for the same Price??
Now correct me if I'm wrong, but doesn't the Dumbo RC gyro work better if it's installed inline with the body?
At the start of the vid, I thought someone delivered you something for an organ transplant.
Yeah awesome buggy bro, i got one of these a week ago and its so good that im getting a 2nd one end of this month,im in South Africa and i cant seem to find a full 12 scale driver to put in it online lol, but i think on the 2nd one ill put wider wheels on and upgrade the shocks and ajustible steering rods on both, but the brushed motors will remain, brushless is too fast because i want to crawl with them also and only in and around my yard and i hate crashing and rolling them so not too much speed for me thanks, i treat them like i treat my real car 😜, btw i enjoy ur rc videos thanks bro, peace from South Africa ✌
This is funny because I had paddles on my rockbouncer & took them off & put 17mm gti street tires on it lol I got the adapters & just wanted to see if they fit ok as I’m writing this you just said paddles on this haha I couldn’t keep the front end on the ground on the beach but they are great for backflips lol
Bro I'm just letting you know I'm a big fan of your channel you have really good content and a lot of it keep it up man definently my number one channel for rc!!! #usa
Nice one mate! I have the same makita electric driver, quality! Definitely a fan of the Dumbo gear too. Cheers
Yeah, I have a lot of Makita stuff, never had any issues with it 👌
What app do you use to check the speed ?????
HOON!....Rip KEN43☹️😭
I've wanted this one for a while...I got a WL toys for my first rc car, can't remember the model (the green one with the role cage). This one looks like it would be fun.
The Green one is the original… the 12428 👌
I got one of those and added a body capable of holding two 6 inch figures and now your giving me some ideas especially those shocks. I swear mine was faster than yours.
I did get mine and for now stock but glad I was able to afford it and bought this week a general balanced lipo multi chemistry charger. Cool 😎
That wasn’t greta….. it was Wednesday out of a Netflix series .. love the channel tho bro 😎
Sway bar would do wonders, added one to my 10428 brushless conversion
12429 is just a tad bigger than 28. The cv shafts don’t fit and a arms are bigger. It’s hard to find cv s for it.
Well, it was a a pretty big improvement from what it started as.
Yes, turned out nice 👌
And the car look very beautiful the wheel are looking very and sporty the coolest car of wltoys thank you
And the car look very beautiful the wheel are looking very and sporty the coolest car of wltoys thank you
I wish I could upgrade like yours in the future. My summer goal hopefully
I´ve got the amewi desert eagle brushed and this buggy was the introduction for me to the rc world. still got it, but don´t use it anymore :D
Looks awesome.
With a bit more work I'm confident you could get it up 80mph. 🤣
Haha… off a cliff maybe 😅
That transition though @4:01 😉 great fun build!
😎🤘
@@TomleyRC Man's got editing skillz! 👍
This thing is bad ass Phil
Cheers dude
I got the 12429 as my first rc car recently, totally stock but oh so much fun!!
Awesome build but I think the body from the original one looks better.
How were you able to put hoons 17mm on a Wltoys 12mm. You never showed that part.
The wltoys receiver is a two channel receiver. The other two ports are channel 1 and channel 2 too - but reverse
Will those 12 to 17 wheel adapters fit on a wltoys 12416 .They dont say what the thread size is.