Man, I have never seen 1) such an incredible helicopter flight 2) A pilot with a brain that can fly these incredible (seemingly impossible) flight patterns! Bravo!
Honestly, you have not had the right exposure. Your talent is godlike, let me help you become famous, you need a media manager, the world needs you to fly I’m their face to understand your talent.
Hello brother Tareq. Many blessings to you and your family and wish you the best ever in your life. Happy to see you back posting more videos and enjoying the hobby. Take care my brother.
Another Spectacular Flight with the SAB GOBLIN RAW NITRO!! Such an Incredible Flight and as always Brother, your maneuvers are quick & precise! I never thought it was possible but your Flying gets better and better. Best wishes always, to you and your Family, Tareq. Stay Safe, Stay Healthy and Stay Well my Brother! ❤️🙏🙏🙏❤️
Tareq, Hello from the US! Very good flying as always! I am still amazed by your flying routines. Good luck in upcoming competitions! For beginner pilots or anyone else who might have difficulty with building or dismantling the very precise machines. The users manuals always recommend using loctite when building, especially with nitro, and again after the break in process with nitro. One must remember, or understand that the tolerances between the main shaft, or spindle shaft to bearings are very tight. The clearances between the threads and where they install are also very tight. When using loctite, the directions recommend a small amount on two to three threads. When getting a screw that already has it, but it is dry and ready for install, notice that it only covers half, or one side of the screw, and it is dry, it will not run. When putting it on a screw, use only a very small amount on two to three threads, the amount only needs to be in the valleys of the screw, it does not have to be a large drop that covers the threads. Ensure that before hand, the screw is clean of grease and oil. If you use too much, and you install the screw, considering the clearance between the thread on the screw and the female side with threads is so small, all of the excess is squeezed out, it can the cover every thread, and also get between the head of the screw and the mating surface. That can make the screw very difficult to remove, if at all. You may end up stripping the screw, and then have to find creative ways to get the screws out, such as cutting or grinding, possible holding a precision part like a spindle, or mainshaft with pliers. In that process, you will create gouges and mars on the surface of the shaft, if that happens, a bearing with an also very precise tolerance will be difficult to remove or install. The excess loctite may also make it's way into a bearing if the screw is next to a bearing. It will dry after entering the bearing, the bearing will be ruined as well. Good luck with your builds!
Does a helicopter like this have more control and speed than those quad drones? Just curious. I've actually never seen a helicopter do such acrobatics before.
Thanks a lot to you Jesse , with this helicopter and YS engine you can get massive of power but for sure you need to do the right setup for the engine , have a nice day 🙌🏻😃
Hi tareq bhai awesome flying as usual, kabhi Gurgaon ya Delhi bhi aajo bhaut din ho gaye aap se mile hue. Aur ek mavic mini 3 pro bhej wado apne chote bhai ke liye. Khairiyat rakhe 🙏🎉
That engine is saying wtf i never felt g-forces like this in my life. i am trying to stay running for you due to my great engineering and materials used.
what... did I... what?? how was that possible... amazing are all your videos like this? are all RC Helicopters capable of whatever that was? so many questions
Ok just after I trhought I have seen it all - LIKE WTF IS HAPPENING THERE????? ARE YOU AN ALIEN, WHAT PLANET ARE YOU FROM??????? LIKE FOR REAL????? I am standing up right now - FULL APLAUSE - clapping, SIR, YOU ARE A BEAST!!!!
Hi .. hope you’re doing well .. on the +_ 13 but im using lighter main blades .. if you are going to use heavy main blades better to go 12.5 +_ have a great day 🙌🏻
Rotor spins at a constant speed. the pitch of the blades can control the thrust, this is how real helicopters work. In RC helicopters the angle can be switched to push upside down.
Man, I have never seen 1) such an incredible helicopter flight 2) A pilot with a brain that can fly these incredible (seemingly impossible) flight patterns! Bravo!
Thank you so much for your kind words 🙌🏻🙏🏻
Honestly, you have not had the right exposure. Your talent is godlike, let me help you become famous, you need a media manager, the world needs you to fly I’m their face to understand your talent.
Hello brother Tareq. Many blessings to you and your family and wish you the best ever in your life. Happy to see you back posting more videos and enjoying the hobby. Take care my brother.
Thanks a lot to you Javier for your lovely words and God bless you and your family , have a great day brother 🙏🏻🙏🏻🙏🏻🌹
Hey, just found your channel! Thanks for sharing your passion for R/C's! ✌🏻
Thanks to you and welcome to my channel 🙌🏻
That is some serious dragonfly action right there!
Nice flight, it's always good to see your videos, keep us posting more crazy videos 👍
Another Spectacular Flight with the SAB GOBLIN RAW NITRO!! Such an Incredible Flight and as always Brother, your maneuvers are quick & precise! I never thought it was possible but your Flying gets better and better. Best wishes always, to you and your Family, Tareq. Stay Safe, Stay Healthy and Stay Well my Brother! ❤️🙏🙏🙏❤️
so sick! - robot precision at the controls
I can watch you fly all day brother!!! Very nice video!!
Tareq, Hello from the US! Very good flying as always! I am still amazed by your flying routines. Good luck in upcoming competitions!
For beginner pilots or anyone else who might have difficulty with building or dismantling the very precise machines.
The users manuals always recommend using loctite when building, especially with nitro, and again after the break in process with nitro.
One must remember, or understand that the tolerances between the main shaft, or spindle shaft to bearings are very tight. The clearances between the threads and where they install are also very tight.
When using loctite, the directions recommend a small amount on two to three threads.
When getting a screw that already has it, but it is dry and ready for install, notice that it only covers half, or one side of the screw, and it is dry, it will not run.
When putting it on a screw, use only a very small amount on two to three threads, the amount only needs to be in the valleys of the screw, it does not have to be a large drop that covers the threads. Ensure that before hand, the screw is clean of grease and oil.
If you use too much, and you install the screw, considering the clearance between the thread on the screw and the female side with threads is so small, all of the excess is squeezed out, it can the cover every thread, and also get between the head of the screw and the mating surface.
That can make the screw very difficult to remove, if at all. You may end up stripping the screw, and then have to find creative ways to get the screws out, such as cutting or grinding, possible holding a precision part like a spindle, or mainshaft with pliers.
In that process, you will create gouges and mars on the surface of the shaft, if that happens, a bearing with an also very precise tolerance will be difficult to remove or install.
The excess loctite may also make it's way into a bearing if the screw is next to a bearing. It will dry after entering the bearing, the bearing will be ruined as well.
Good luck with your builds!
Does a helicopter like this have more control and speed than those quad drones? Just curious. I've actually never seen a helicopter do such acrobatics before.
Completely insane skills!
I'm confused as to how the fuel pickup, uhhh, picks up 🤣
Hello and so glad to see you again!! I would have never thought nitro would be able to fly like that good job like always…
Thanks a lot to you Jesse , with this helicopter and YS engine you can get massive of power but for sure you need to do the right setup for the engine , have a nice day 🙌🏻😃
I love the high headspeed runs you’re the best I would love to see you push it and see how much one of these helicopters can take!
That was truly epic.
I do feel sorry for your cameraman though!
hello my new friend 😃🤝 it's cool to see a very nice thermal flight 😁👌 have a nice weekend and have a good flight see you soon😜✌
Would love to see a minute of the hands on the controller. The eye hand coordination is out of this world
As always, Bosultan is creative and professional✌️😍
Never liked Nitro but you make it look amazing !!
Thanks a lot to you man 😃🙏🏻
Me: Tareq, you know that gravity block some moves?
Tareq : Let me see.
Amazing flight bro always new flying style 🇦🇪💐💖
Fantastic nitro fly Tareq 👍😳👌👏
Hello Tareq
as always great flight you are still a mystery to me how you can fly
thumbs up
Love it when you bring out your nitro helicopter. 💪🏻🚁💨
Very good, awesome job Bro 👍
Thats Crazy mann.Lg From Austria
Hi! This acrobatics of yours is always great! I've a question, and where are the pyro tick-tock? )))😄
Never fail to impress
Hi tareq bhai awesome flying as usual, kabhi Gurgaon ya Delhi bhi aajo bhaut din ho gaye aap se mile hue. Aur ek mavic mini 3 pro bhej wado apne chote bhai ke liye. Khairiyat rakhe 🙏🎉
Amazing flying dudw
I love your all video
Wow amazing sir.
Thanks to you 😃
Awesome flight 👍👍👍
Thanks to you 😃
Amazing!
Nasty flight!!!
Thanks to you 😃
Amaizing !!!!!!👏👏👏👏👏
Tareq Tareq Tareq 🤘❤️🙏
making good power!
Thanks to you 😃
Hello Master. Unbelievable how skilled you are! What is more fun, electric or fuel-powered ?
Salam from Pakistan 👍
Awesome as always!
Question - how come we don't see you in the UK?
Holy shit bro!
Zoom out, and use a stabiliser! Please camera pal. We need to see this sharper! Outstanding
Your awesome dude just subed ya 😎
Not sure who was most confused, your camera man or gravity. 😂
Hello Tareq, Multigov pro again on this one ? thanks for your asking..
Hi .. hope you’re doing well .. on this video I’m using the v bar governor with the v control radio , have a nice day
@@multistratus have a wonderful day Tareq. Thanks for your feed-back
2:33 Do a little dance, make a little love, get down tonight 🤣
Awesome bro,Allah bless u, where's it home country
🤩 wow
That engine is saying wtf i never felt g-forces like this in my life. i am trying to stay running for you due to my great engineering and materials used.
what... did I... what?? how was that possible... amazing are all your videos like this? are all RC Helicopters capable of whatever that was? so many questions
wow.nice
Nice.. My frenz
Thanks to you
What brand and type of glow plug do you use? Nitro %?
Nitro the best
puts .muito top
Nice rc helikopter🚁🚁🚁🚁
Ok just after I trhought I have seen it all - LIKE WTF IS HAPPENING THERE????? ARE YOU AN ALIEN, WHAT PLANET ARE YOU FROM??????? LIKE FOR REAL????? I am standing up right now - FULL APLAUSE - clapping, SIR, YOU ARE A BEAST!!!!
Tariq ., if you keep practicing .., I’m sure you’ll be able to fly it one day 🤣😜 … just kidding dude 👍👍 you’re fn Awesome !!!
Hey brotha ..i been watching u for years ...do u think you could do an into video on 3d flying for the noobs like myself
Does the camera guy ever get arm pump?
Hi Tareq, I'm your fan, tell us how much do you use as a collective add-on, in nitro helis, thank you hug 🚁💨💨💨
Hi .. hope you’re doing well .. on the +_ 13 but im using lighter main blades .. if you are going to use heavy main blades better to go 12.5 +_ have a great day 🙌🏻
OK thank you
Mashallah king 🤩🤩🤩🤩😖😖😖😖
If the rotor blade spins in one direction, how do you get it to stand on its head?
Rotor spins at a constant speed. the pitch of the blades can control the thrust, this is how real helicopters work. In RC helicopters the angle can be switched to push upside down.
muito bom ...cabeca dele funciona diferente kkkkkkk
Imagine when these angry machines will come after us armed…
Do u want to trade thumbs?
Airwolf
Hello bro tareq can i get a job regarding the rc hobbies
Buddy! Why isn't RC sparks on your community
Lol,not community channels
Half-Life 2 Manhack prototype.
Tuning Setup Flight 😅😅😅
لم افهم شئ
I wish a hacker can do it to all american airforce
I will buy a full scale bell 222 and convert it to a 3d airwolf helicopter. You want to fly? I’ll strap in with you. Your call.
rc helicopter on complete steroids and crack
Let me buy a full scale Aitwolf and we can fly it together and be gods