I wanna say thank you so much! Without your video I would have been so discouraged and threading this. I'm the type of person that's need a visual look. So again, thank so much!
Thank you so much, your directions helped me so much! After waiting 10 months to opening the box this machine came in, only to find all the threads undone, I was able to rethread my machine....now...I am on to learning how to use a serger! Wish me luck!
Thank you so much, this is the only machine I found on Facebook that looked like mine. I could NOT for the life of me figure out how to get the green thread through the last three loops until I found your video. Green thread was about to be my thirteenth reason after 4 hours of trying
After 5 other tutorials I could not make heads or tails of, I’d lost hope… then I found yours. My serger is successfully threaded again…. Thank YOU!!!!!!!!
Wow! This made my day! Today’s has been a great birthday! Thank you so much for letting me know! I know it wasn’t the best quality but I had to use what I had. Glad it is threaded again!
@@gracepolite7817 awww, wishing you the happiest of birthdays!!!!! Again, I cannot thank you enough for the best tutorial on threading the Jenome 8933 out there. I was able to sew up 32 large flannel blankets for the animal shelter this weekend …. Without you I was ready to go buy a new machine because I was in tears. Can’t attach a pic here but gave you kudos on my IG stories!! YOU ROCK, Serger Queen!!!!
Thank you so much for sharing! I was stuck at one section with the “green” thread, and you cleared it right up! I never would have thought of opening the other side. 😂 Thank you thank you!
I just want to share a tip... When threading the needles if you lick your finger and then wipe the back of the needle it seems to help thread the needle. But as she showed in the video you have to have smooth cut ends... Good video 😊
You are my HERO! However, the chirping heard on your video sent my mother in law, brother in law and husband searching for the carbon monoxide detector with a dying battery which was hilarious because i kept saying it was the video. I just needed help threading the lower looper, and you're guidance saved my sanity!!! Thank you again!
Thank you sooo much. I usually try to tie off my threads but didn’t have a long enough start so I had to re-thread everything. That was so hard but was made a lot easier with your video.
I would recommend that you rehearse your video first. Iron out All The kinks and then record for good. I was very confused with all this going back and fixing this and going back and changing that and cutting the thread shorter and longer. I very much appreciate that you did this because yes it is very complicated but I'm sorry to say that I'm almost as confused as I was before I started
Thanks so much! The manual isn't as clear with the graphics as your camera work is. I'm a very visual person, but couldn't figure it out until I found your video. Much appreciated.
hi thank u i am so inspired this vidio.... it really hellped me so much!!! like i used the instructions the first time to rethread and i somehow .... miraculously? got it to work..... but the part where u explain how to do the 2nd thread from behind that saved my life!!! i was so confused and frustrated before i was ready to give up!!! i subscribed and and will be forever watching what u put out!!! tthanks again
Yay!! I’m so happy I could do that! It really means a lot that you engaged with my channel! I hope I can continue to encourage you. But know,.. I am not perfect so I may let you down. Just don’t give up on me!
Thank you! I finally got it threaded. I guess I need to set my tension because my right thread keeps breaking. I have it set as 3, 3, 3, 3...side knobs top 3 bottom 1??
Stumbled across video after trying 5 unsuccessful hours to get my machine re-threaded! The video is extremely helpful with the green thread, which I thought was my issue 😒 sadly, my machine is not making chains. What have I done wrong or what am I missing?
Go to any small quilting store, they will be able to help you threading. They did for me one time. And ask them questions, specifically about green thread. You can do it! I finally did it today with this video, it took me about two hours. It's, actually, easy when you will be familiar with your serger.
Well, I can certainly try that that would be an easy fix at this point. I feel like I am not treading the needle part correctly, you know at the metal piece and thread feeder Thank you for the advice!! @@sering8367
OMG! I got rid of my viking husquavarna 936 because I wanted a machine where I didn't need surgical tools and a degree in engineering to thread. THIS was the wrong machine for me. I wish I would've watched your video BEFORE I bought the machine. Thankfully, amazon takes returns.
How do u like it I was thinking of returning my brother sdx for this one the brother is so big and bulky and this one is nicer looking the brother feet are so hard to change that’s what really makes me want to return it
Thanks so much just got my janome serger and the threads popped you are the only one with that was able to show me step by step how to thread it thanks again
Playing the first half several times I was able to thread. But for another time concentrate on threading the first thread - the rest are pretty straight forward. Voice needs to be clearer without background noise. Hands shouldn’t be blocking what you are doing but how you solve, I don’t know.
![Lethal Company Music Video 🎵 "Follow The Orders" [VERSION A]](http://i.ytimg.com/vi/QeooZB4Z7RA/mqdefault.jpg)
I wanna say thank you so much! Without your video I would have been so discouraged and threading this. I'm the type of person that's need a visual look. So again, thank so much!
That means a lot thank you for your kind words.
Thank you for posting these instructions! I became so frustrated with attempting to rethread my machine!
Thank you! Instruction book didn't help me to thread the blue looper correctly--now, thanks to you, it works!
Thank you so much, your directions helped me so much! After waiting 10 months to opening the box this machine came in, only to find all the threads undone, I was able to rethread my machine....now...I am on to learning how to use a serger! Wish me luck!
You are a life saver! Thank you for the great instructions!
Thank you so much, this is the only machine I found on Facebook that looked like mine. I could NOT for the life of me figure out how to get the green thread through the last three loops until I found your video. Green thread was about to be my thirteenth reason after 4 hours of trying
After 5 other tutorials I could not make heads or tails of, I’d lost hope… then I found yours. My serger is successfully threaded again…. Thank YOU!!!!!!!!
Wow! This made my day! Today’s has been a great birthday! Thank you so much for letting me know! I know it wasn’t the best quality but I had to use what I had. Glad it is threaded again!
@@gracepolite7817 awww, wishing you the happiest of birthdays!!!!! Again, I cannot thank you enough for the best tutorial on threading the Jenome 8933 out there. I was able to sew up 32 large flannel blankets for the animal shelter this weekend …. Without you I was ready to go buy a new machine because I was in tears. Can’t attach a pic here but gave you kudos on my IG stories!! YOU ROCK, Serger Queen!!!!
Thank you so much for sharing! I was stuck at one section with the “green” thread, and you cleared it right up! I never would have thought of opening the other side. 😂 Thank you thank you!
It’s my pleasure! Sorry it wasn’t the best quality! But glad you were able to fine it useful
Thank you!
I’m still confused about the 2 needle threads. I don’t see where they go past the tension dial. Please help and thank you ‼️💜
Thank you so much! It’s that first thread that’s the kicker. I really appreciate it.
Thanks for the perfect video. I watch this every time I use my serger! Thanks for your help!
Thank you! You saved me a trip to the repair shop!
Thank you for this video ! I have only threaded my machine twice so far , I always pull up your video while I’m working it ❤ thank you !!!
You have more faith in me then I do!! But you got me through it! Thank you!
Thank you so much, I have the manual and still was having trouble until I watched your video. Thank you, Amy from Moline, IL
I just want to share a tip... When threading the needles if you lick your finger and then wipe the back of the needle it seems to help thread the needle. But as she showed in the video you have to have smooth cut ends... Good video 😊
I am so glad I found your video. Now I can actually use my serger!❤
Thank you so much for this video - I couldn’t have done it without you!!!!
Than you so much ... I did it LOL I fell like I accomplished something difficult today, there are no instructions with my machine
You are my HERO! However, the chirping heard on your video sent my mother in law, brother in law and husband searching for the carbon monoxide detector with a dying battery which was hilarious because i kept saying it was the video.
I just needed help threading the lower looper, and you're guidance saved my sanity!!! Thank you again!
I DID THE SAME THING!! I kept hearing that chirp noise and I went around inspecting my fire alarms!
This had me crying! I’m so sorry! Glad I could help!
You are so funny! I did not hear any chirping , I guess I am deaf
Thank you sooo much. I usually try to tie off my threads but didn’t have a long enough start so I had to re-thread everything. That was so hard but was made a lot easier with your video.
Omg thank you! Super clear, perfect pace
Thank you so much!!! This has helped me tremendously since I purchased the machine at estate sale and don’t have a manual. Great job! 👏
Super helpful- you saved me! Thank you! (I love listening to you sing too!)
Thank you! You are amazing and I appreciate this video so, so much!
It’s my pleasure. No problem I have more to come. I just want to be of service for others.
This was perfect, I could not have done it with out you!
Thank you for such life saver! It’s greatly appreciated!
Thank you so much for putting this video!! It took me a while to thread, but I did it!!
You have an incredible singing voice. Love it!
I would recommend that you rehearse your video first. Iron out All The kinks and then record for good. I was very confused with all this going back and fixing this and going back and changing that and cutting the thread shorter and longer. I very much appreciate that you did this because yes it is very complicated but I'm sorry to say that I'm almost as confused as I was before I started
Great to know! Thanks for your comment! It means the world to me.
You are the best. God bless you ❤
@@jeanulrich6305 thank you for your kind words!
Thank you!!!❤️🙏🏼 green is a pain in the back!!❤️
i am stuck with the blue thread, can you zoom in closer so i can see exactly where your placing the thread
Thank you!!!! This is an amazing tutorial!
Can you do tutorial of Stirling Overlock
I thread the first thread (turq color) just like you say and it still keeps breaking The hardest one...green
This was super helpful! Thank you very much!
Thank you so much for this I went from😢 to 😊.
Thank you for your video. It's threaded.
Thanks so much! The manual isn't as clear with the graphics as your camera work is. I'm a very visual person, but couldn't figure it out until I found your video. Much appreciated.
Sorry if it's not the best footage! I am so happy to see that so many of you find it useful!!!!
Thank you!
How do you like the Janine 8933?
I am considering one as my first serger.
hi thank u i am so inspired this vidio.... it really hellped me so much!!! like i used the instructions the first time to rethread and i somehow .... miraculously? got it to work..... but the part where u explain how to do the 2nd thread from behind that saved my life!!! i was so confused and frustrated before i was ready to give up!!! i subscribed and and will be forever watching what u put out!!! tthanks again
Yay!! I’m so happy I could do that! It really means a lot that you engaged with my channel! I hope I can continue to encourage you. But know,.. I am not perfect so I may let you down. Just don’t give up on me!
Thank you! I finally got it threaded. I guess I need to set my tension because my right thread keeps breaking. I have it set as 3, 3, 3, 3...side knobs top 3 bottom 1??
@@patriciablack5791 try changing the tension and serging as you go. They don’t all have to be the same. You got this! So proud of you!
Thank you, bless you and your baby!
Thank you!
thank you very much!!! im so excited to start serging now:)
This video saved me! Thank you!
I’m glad I could help!
Thank you for this video. It helped me so much today.
Yay! So happy I could be of assistance to you!
Thanks so much!
Thank you so much!!!
Stumbled across video after trying 5 unsuccessful hours to get my machine re-threaded! The video is extremely helpful with the green thread, which I thought was my issue 😒 sadly, my machine is not making chains. What have I done wrong or what am I missing?
Go to any small quilting store, they will be able to help you threading. They did for me one time. And ask them questions, specifically about green thread. You can do it! I finally did it today with this video, it took me about two hours. It's, actually, easy when you will be familiar with your serger.
Life saver thank you
I need help!!! My thread keeps breaking at the needles.
I believe that may means you need new needles.
Well, I can certainly try that that would be an easy fix at this point. I feel like I am not treading the needle part correctly, you know at the metal piece and thread feeder Thank you for the advice!! @@sering8367
Thank you..
My pleasure.
OMG! I got rid of my viking husquavarna 936 because I wanted a machine where I didn't need surgical tools and a degree in engineering to thread. THIS was the wrong machine for me. I wish I would've watched your video BEFORE I bought the machine. Thankfully, amazon takes returns.
How do u like it I was thinking of returning my brother sdx for this one the brother is so big and bulky and this one is nicer looking the brother feet are so hard to change that’s what really makes me want to return it
It’s really nice. I like how I can have it right beside my singer and still have space. I believe if that thought have arise it may be worth a shot.
Thanks a million!
My pleasure!
Thanks so much just got my janome serger and the threads popped you are the only one with that was able to show me step by step how to thread it thanks again
@@tremaynechristopher2366 Wow!? Really no thank you for watching my video! I hope you enjoy this machine as much as I do.
Por favor explique en español por favor
If your lower looper thread doesn't lay on top of upper looper thread it won't work.
mi green point tread keeps on breaking!!!
Please change your smoke detector battery
lol I don’t even stay there anymore.
Oooommmmggggg😬
Playing the first half several times I was able to thread. But for another time concentrate on threading the first thread - the rest are pretty straight forward. Voice needs to be clearer without background noise. Hands shouldn’t be blocking what you are doing but how you solve, I don’t know.
You're too far. I can't see anything 😭