"Trying to follow a manual but that didn't work ". Unfortunately this is the case with almost every manual or walkthrough for installing something into Linux. 🙄 Thanks for all the effort you put into it. 👍🏻 Really appreciated
Thank you so much. You are a lifesaver. I will keep this guide. I rarely game but I have needed OpenCL and have never found a comprehensive detailed step-by-(don't leave out a thing)-step walk through. MUCH APPRECIATED !!!
Quick tip. Mark text with swiping or double/triple click. Then middle click where you want to past it. No need to open then copy meny. Easier to use addgroup(8) or adduser(8) to add some groups to a user.
The thing about the pre-installed drivers is that some of them aren't probably going to render individual models or textures from games correctly, such as glove skins from CS:GO, they all look black with some shady and rough colors, but once you actually install the necessary graphics drivers, it renders them correctly. So yeah, I think that's one of the cases where you'd need to install the drivers. But this is probably more oriented towards OpenGL.
I tried this guide but didn't work in my case. I have a AMD APU Ryzen 5 3400g and I using Ubuntu 20.04. I finally figured out how to put davinci resolve to work doing this steps: - Install driver amdgpu-pro - Activate iommuv2 on BIOS - Install all DEBs starting with opencl on amdgpu-pro tar file. Only after that Davinci Resolve starts. Before all that I opened GRUB configuration file and put iommu=pt at the end of GRUB_CMDLINE_LINUX_DEFAULT and perform sudo update-grub after that. It resolves the glitches when I watch videos. I'm not sure if this is still necessary with amdgpu-pro driver but I want to leave this tip here.
after several trys I figured out that the method down below is working, "Using Debian-based ROCm with Upstream Kernel Drivers". You can install the ROCm user-level software without installing the AMD’s custom ROCk kernel driver. To use the upstream kernels, run the following commands instead of installing rocm-dkms
for tensorflow you need to install miopen too (also hip-hcc too if it's not already installed) after that just do "pip-install tensorflow-rocm". If it still does not work install missing libraries that in the error mesagge.
I have Ubuntu 20.04 and an Radeon RX 570. This process gives me the following error: Unpacking rock-dkms-firmware (1:3.5-32) ... dpkg: error processing archive /var/cache/apt/archives/rock-dkms-firmware_1%3a3. 5-32_all.deb (--unpack): trying to overwrite '/usr/share/doc/amdgpu-dkms-firmware/LICENSE', which is als o in package amdgpu-dkms-firmware 1:5.6.0.13-1089974 dpkg-deb: error: paste subprocess was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/rock-dkms-firmware_1%3a3.5-32_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Does anyone else get stuck here?
Thank you mate, you rock! I solved my OpenCL problems on Blender with a Radeon Pro WX 3100. Now I just need to figured out why Radeon Pro Render module doesn't start but Cycles works fine for now.
Just want to note, that ROCm can be quite limitied. The navi (RX 5000 series) is not supported at all. The "cuda" hsa is not supported for APUs or older than RX 400 series (the Open CL should work). It might work but it's not like cuda-grade
Exactly, been following the GitHub issue on Navi for ROCm for several months now. Considering I'm getting a new laptop with an RX 5600M, this is a big bummer.
I had some weird issues with ROCm on Ubuntu 20.04. Rendering in Blender was super slow, a benchmark scene that normally takes under a minute was showing ETA of about 5 hours. I also had some weird graphical corruption, and my system crashed before it could finish... I installed only the OpenCL part of AMDGPU-PRO and that works much better, no issues.
When I tried to install the AMDGPU drivers it bombs out with the Kernel version. What commandline did you use to install only the OpenCL part? I'm about to test the video on my 5700Xt and clean install
Great tutorial, but I had to roll back to Kernel 5.6, from 5.8 and put it on hold (not to update) and ProRender on Blender crashes with ROCm and Kernel 5.6. Thank you for the great content. Keep it up.
The following packages have unmet dependencies: rocm-gdb : Depends: libpython3.8 but it is not installable E: Unable to correct problems, you have held broken packages. help me gys?
I'm having no luck running Davinci Resolve on my system. Specs: RX 480 8GB Intel 2500K Using Ubuntu 20.04 or Pop OS 20.04. resolve does not recognize my graphics card. Is it just me?
Too bad AMD doesn't even support its own GPU's with ROCm. All Navi 10 GPU's are unsupported and are not even being considered for the foreseeable future. Quoted straight from an AMD employee on ROCm's GitHub. My friend and I wanted to do machine learning with the RX 5700 XT, but nope, doesn't even work.
Just a note for people who get invalid key resource errors with their gpg keys; the following thread has the answer. askubuntu.com/questions/1246031/gpg-invalid-key-resource-url-following-docker-official-guide After some editing of the URL's it worked for me!
Hi, Don! 👋 I saw that you suggested changing the kernel to 5.6, but what is the exact 5.6 kernel? And what is the model and brand of your RX 570? Thank you if you can answer me. 🙏
If the drivers are already in the kernel and we don't need to update them, it means we they never get improved? how do I know i have the lastest version of graphics card (in my case a 5700 XT)
Can you suggest these changes to the official tutorial? I thing people who write a lot of official tutorials do not start with fresh install and have packages already install, so they are left out in the tutorials.
Hi, It don't work for 20.10 PopOS distribution : Building initial module for 5.8.0-7625-generic ERROR (dkms apport): kernel package linux-headers-5.8.0-7625-generic is not supported Error! Bad return status for module build on kernel: 5.8.0-7625-generic (amd64) Consult /var/lib/dkms/amdgpu/3.9-17/build/make.log for more information.
I keep getting an error when I do the 'sudo apt install rocm-dkms'. dpkg-deb: error: past subprocess was killed by signal (broken pipe). WTH does that mean?
Try dkpg -I - -force-all (your Deb file) It did solve my problem when installing deb files For best use plasma discover which is best software center for kali linux or parrot os
Were you able to get opencl running on ubuntu 20.10? I too am trying to get opencl support on my 5700xt so I can use phoenix miner. Haven't had any luck
@@TheObscuro77 i wasnt proud enough to try it on my main ubuntu system because i have way to much stuff on it 😅 i need to buy an spare ssd and try it there
I installed Ubuntu 20.04 last week on my Asus gl503 and was soooo slow that I reinstalled it again but the minimum install and then it ran nicely but by that time it had left a bad taste so I went back to Mint xfc which is very fast and light in my asus...So far so good so I have it in 1 ssd and Mint Mate in the other ssd,,,flawless performance.
It did not work for me. All finished as described, but since that time my radeon hd6550m card is not used anymore. The lspci shows that there is radeon driver in kernel but not in use. Now only the embedded intel gpu is working. Could someone help me?
Im curious, seeing as you have the same GPU I do, have you by chance tried the DaVinci Resolve 17 beta 2. I am using the standard AMDGPU-PRO drivers installed with --opencl=legacy. doesnt work, So im wondering if youve touched it and your experience with it
@@NovaspiritTech Awesome, thanks mate. I believe it to be an issue on the 'davinci resolve' side of things, as fusion appears to work fine. anyhow, +1 sub
I get stuck on the first step -.- After trying to do whatever that key thing is I get: Warning: apt-key is deprecated. Google had nothing that made sense that would fix this. Anyone have a tip?
fresh ubuntu-20.0.4 desktop install, update, full-upgrade, required reboots, etc. AMD RX480 8GB. upon running rocminfo I get: ROCk module is loaded [nl] Unable to open /dev/kfd read-write: Cannot allocate memory [nl] user is member of render group [nl] hsa api call failure at: /src/rocminfo/rockminfo.cc:1142 [nl] Call returned HSA_STATUS_ERROR_OUT_OF_RESOURCES: The runtime failed to allocate the necessary resources. This error may also occur when the core runtime library needs to spawn threads of create internal OS-specific events. [end] googling...
Hi im getting bios error on booting. I have done everything... From changing bios values to bios update reinstalls, reinstall os.... Everything... But no use. Its still getting the error and going to the bios menu everytime i boot. Mine is amd 64, ryzen 5 acer nitro. Dual booted. Help plzz... Also i had issues with rocm , graphics, cannot view videos, debian files error, some broken files found.. Couldn't work with tensorflow, opencv, couldn't render videos...
I've been following along pretty closely to this, but Linux is totally new to me. When I try to run the install command, I get "E: unable to correct problems, you have held broken packages". Wth does that mean? How do I fix it?
@@NovaspiritTech Hi Dan, unfortunately I have not been able to install this on Pop OS 20.04... Installs perfectly on Ubuntu, but Resolve still says that there is no OpenCL Graphics Card Installed
Hi can you please tell me how to fix this? Errors were encountered while processing: rock-dkms rocm-dkms E: Sub-process /usr/bin/dpkg returned an error code (1)
The following packages have unmet dependencies: rocm-dkms : Depends: rocm-dev but it is not going to be installed Depends: rock-dkms but it is not installable 😑😑😑
Setting up rock-dkms (1:3.10-27) ... Removing old amdgpu-3.10-27 DKMS files... ------------------------------ Deleting module version: 3.10-27 completely from the DKMS tree. ------------------------------ Done. Loading new amdgpu-3.10-27 DKMS files... Building for 5.4.0-56-generic Building for architecture x86_64 Building initial module for 5.4.0-56-generic ERROR: Cannot create report: [Errno 17] File exists: '/var/crash/rock-dkms-firmw are.0.crash' Error! Bad return status for module build on kernel: 5.4.0-56-generic (x86_64) Consult /var/lib/dkms/amdgpu/3.10-27/build/make.log for more information. dpkg: error processing package rock-dkms (--configure): installed rock-dkms package post-installation script subprocess returned error exit status 10 dpkg: dependency problems prevent configuration of rocm-dkms: rocm-dkms depends on rock-dkms; however: Package rock-dkms is not configured yet. dpkg: error processing package rocm-dkms (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up er ror from a previous failure. Errors were encountered while processing: rock-dkms rocm-dkms E: Sub-process /usr/bin/dpkg returned an error code (1)
Ubuntu 20.04.1, can't get rocm-3.9 to work with Resolve. It starts, and the GPU is shown in preferences, but the preview and edit windows are completely black. It does work with AMDGPU-Pro 20.40, but that has a weird bug where it doesn't spin up my GPU fan under load (VEGA FE). Does work on the FOSS drivers. Also, AMDGPU-Pro has a lot of problems with OBS. And Natron is totally broken. What a hot mess.
What's the difference between this rocm and official radeon amdgpu allopen drivers from their website? As I understand Ubuntu 20 version has none of them pre installed.
Do you have a video of how to install Raedon software or other GPU and CPU software? I know PopOS have AMD working out of the box but I am stuck trying to install the software to change settings. Any help or tips is mutely appreciated
Didn't work here: ERROR (dkms apport): kernel package linux-headers-5.8.0-7642-generic is not supp orted Error! Bad return status for module build on kernel: 5.8.0-7642-generic (amd64) Consult /var/lib/dkms/amdgpu/4.0-23/build/make.log for more information. dpkg: erro ao processar o pacote rock-dkms (--configure): o subprocesso instalado, do pacote rock-dkms, o script post-installation retorn ou erro do status de saída 10 Nenhum relatório apport escrito pois a mensagem de erro indica que é um erro de seguimento de um erro anterior. dpkg: problemas com dependências impedem a config uração de rocm-dkms: rocm-dkms depende de rock-dkms; porém: Pacote rock-dkms não está configurado ainda. dpkg: erro ao processar o pacote rocm-dkms (--configure): problemas de dependência - deixando desconfigurado Erros foram encontrados durante o processamento de: rock-dkms rocm-dkms E: Sub-process /usr/bin/dpkg returned an error code (1)
I'm trying to get Resolve to work on my machine. It worked perfect in my virtualbox setup with PopOS 20.04, so I finally made the switch to PopOS as my new desktop OS, replacing Lightroom with Darktable, etc. Everything works except for Davinci Resolve. I can't get it to start, just as you described. Tried this but ran into errors: ERROR (dkms apport): kernel package linux-headers-5.4.0-7626-generic is not supported Error! Bad return status for module build on kernel: 5.4.0-7626-generic (amd64) I know for sure it's the openCL because I found this in the debug log of Resolve: OpenCL error -1: 'CL_DEVICE_NOT_FOUND', GPUPropertiesUtilUnix.cpp:360. I have an older Radeon R7 card (Oland PRO [Radeon R7 240/340]) but I won't give up ;o)
Dell studio 1555 laptop, was trying Ubuntu live usb , how can I install the drivers when the laptop just shuts down minutes after the OS loads? Is it graphic card drivers error?
Didn't work for me in Ubuntu 20.04. I think it is because I already have AMD Pro drivers installed . I guess the 2 cannot live side by side. Typical dependency hell and I don't know Voodoo.
I got E: Malformed entry 1 in list file /etc/apt/sources.list.d/rocm.list (Suite) E: The list of sources could not be read. EDIT: I fixed that, now stucked on rocm-dkms installation command. Tried to do this on Synaptic and it gives me the same message: Depends: rocm-dev but it is not going to be installed Depends: rock-dkms but it is not installable Depends: rocm-core but it is not going to be installed How to solve this?
Substantially, rocm-dev needs rocm-core and I solved this but rock-dkms is like...no longer available. Could you do a video with Synaptic Package Manager guide? I think it's easier that Terminal because terminal tends to give errors but no clues.
This helped a lot but once I managed to open DaVinci Resolve, I cannot see the thumbnails or any image at all. I cannot see the video playing but I can hear sound. I'm about to give up on Linux. :(
"Trying to follow a manual but that didn't work ". Unfortunately this is the case with almost every manual or walkthrough for installing something into Linux. 🙄
Thanks for all the effort you put into it. 👍🏻
Really appreciated
exactly.
Genius! Finally have DaVinci Resolve open in Ubuntu. Thanks Don!
Thank you so much. You are a lifesaver. I will keep this guide. I rarely game but I have needed OpenCL and have never found a comprehensive detailed step-by-(don't leave out a thing)-step walk through. MUCH APPRECIATED !!!
Quick tip.
Mark text with swiping or double/triple click.
Then middle click where you want to past it. No need to open then copy meny.
Easier to use addgroup(8) or adduser(8) to add some groups to a user.
You're the love of my life, THANK YOU FOR THIS I FINALLY CAN HAVE ONLY ONE DISTRO ON MY PC!
The thing about the pre-installed drivers is that some of them aren't probably going to render individual models or textures from games correctly, such as glove skins from CS:GO, they all look black with some shady and rough colors, but once you actually install the necessary graphics drivers, it renders them correctly. So yeah, I think that's one of the cases where you'd need to install the drivers. But this is probably more oriented towards OpenGL.
I tried this guide but didn't work in my case. I have a AMD APU Ryzen 5 3400g and I using Ubuntu 20.04.
I finally figured out how to put davinci resolve to work doing this steps:
- Install driver amdgpu-pro
- Activate iommuv2 on BIOS
- Install all DEBs starting with opencl on amdgpu-pro tar file.
Only after that Davinci Resolve starts.
Before all that I opened GRUB configuration file and put iommu=pt at the end of GRUB_CMDLINE_LINUX_DEFAULT and perform sudo update-grub after that. It resolves the glitches when I watch videos. I'm not sure if this is still necessary with amdgpu-pro driver but I want to leave this tip here.
thanks man ,work for me and i also didn't find install driver amdgpu-pro necessary i didn't did it
they updated the kernel to 5.8.0 and your video is not working anymore :(
I've reverted to 5.6 to be sure
Thank you, worked perfectly. rx580 and unbuntu 20.04
This couldn't be a better-timed video. Been trying for the last few weeks to get Resolve working with my vega64!!!!
after several trys I figured out that the method down below is working,
"Using Debian-based ROCm with Upstream Kernel Drivers".
You can install the ROCm user-level software without installing the AMD’s custom ROCk kernel driver.
To use the upstream kernels, run the following commands instead of installing rocm-dkms
This is incredibly frustrating. It seems everything installed correctly, but my GPU isn't showing up in the GPU list of DaVinci Resolve. :(
for tensorflow you need to install miopen too (also hip-hcc too if it's not already installed) after that just do "pip-install tensorflow-rocm". If it still does not work install missing libraries that in the error mesagge.
I have Ubuntu 20.04 and an Radeon RX 570. This process gives me the following error:
Unpacking rock-dkms-firmware (1:3.5-32) ...
dpkg: error processing archive /var/cache/apt/archives/rock-dkms-firmware_1%3a3.
5-32_all.deb (--unpack):
trying to overwrite '/usr/share/doc/amdgpu-dkms-firmware/LICENSE', which is als
o in package amdgpu-dkms-firmware 1:5.6.0.13-1089974
dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)
Errors were encountered while processing:
/var/cache/apt/archives/rock-dkms-firmware_1%3a3.5-32_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Does anyone else get stuck here?
Thank's man :) Appreciate the video!
dude your are great they forgot to add the little details in the doc and made this task almost impossible thanks for sharing you helped me a lot
Thank you so much. Stupid Radeon drivers kept crashing blender for me on windows, but Ubuntu runs it like a dream
Thank you mate, you rock! I solved my OpenCL problems on Blender with a Radeon Pro WX 3100. Now I just need to figured out why Radeon Pro Render module doesn't start but Cycles works fine for now.
really great video everything worked as by stated by you... 0 errors
very easy to understand
Just want to note, that ROCm can be quite limitied. The navi (RX 5000 series) is not supported at all. The "cuda" hsa is not supported for APUs or older than RX 400 series (the Open CL should work). It might work but it's not like cuda-grade
Exactly, been following the GitHub issue on Navi for ROCm for several months now. Considering I'm getting a new laptop with an RX 5600M, this is a big bummer.
Thank you! Saved me another three hours of saying wtf, why doesnt the work. Much appreciated!
I had some weird issues with ROCm on Ubuntu 20.04. Rendering in Blender was super slow, a benchmark scene that normally takes under a minute was showing ETA of about 5 hours.
I also had some weird graphical corruption, and my system crashed before it could finish...
I installed only the OpenCL part of AMDGPU-PRO and that works much better, no issues.
Good to know. I haven't tried using amd pro yet
When I tried to install the AMDGPU drivers it bombs out with the Kernel version. What commandline did you use to install only the OpenCL part? I'm about to test the video on my 5700Xt and clean install
Helped me alot with ASUS PN50 graphic drivers for Linux Ubuntu Server 20.04
Thank you very much!
ROCm install guide = perfect
Thank you Don 👍
Worked like a charm on Kubuntu 20.04
Great walkthrough 👍
Thanks for sharing 👍😀
Isn't it tensorflow and not tensionflow?
Hahahhaha you are right. My mind was in lala land
Great tutorial, but I had to roll back to Kernel 5.6, from 5.8 and put it on hold (not to update) and ProRender on Blender crashes with ROCm and Kernel 5.6. Thank you for the great content. Keep it up.
Getting error with "rocminfo"
Unable to open /dev/kfd read-write:bad adress
Hsa api call failure at /src/rocminfo/rocminfo. Cc:1142
same here ,did you got solution?
You saved the day! Now I can render in blender and crypto mine! Thanks a bunch
Literally me
Thank you, this was fantastically clear
Awesome video Don! Thank you very much for sharing this with us this helps a lot!💖👌👍😎JP
works better than amdgpu-pro in RX580, nice!
Great. Now do it on Manjaro and I'm impressed.
The following packages have unmet dependencies:
rocm-gdb : Depends: libpython3.8 but it is not installable
E: Unable to correct problems, you have held broken packages.
help me gys?
same here, were you able to solve?
I'm having no luck running Davinci Resolve on my system.
Specs:
RX 480 8GB
Intel 2500K
Using Ubuntu 20.04 or Pop OS 20.04. resolve does not recognize my graphics card. Is it just me?
No. It's me too
Thank you , working how to
Wow with arch you just yay rocm and done
I just did this and it rebooted. Now everything is blown up to 720p. I have a rx580. Guess it didn't work for me.
Will this also work if I have 2 graphic cards one with intel processor Integra and then I have Additional AMD Radeon
Interesting stuff Don! Thanks
ROCm should be bundled by default with Mesa. I don't get why they don't. 🤷🏻♂️
Too bad AMD doesn't even support its own GPU's with ROCm. All Navi 10 GPU's are unsupported and are not even being considered for the foreseeable future. Quoted straight from an AMD employee on ROCm's GitHub.
My friend and I wanted to do machine learning with the RX 5700 XT, but nope, doesn't even work.
Btw why the repo said xenial and not focal ? Ubuntu 20.04 is focal somethig something right ?
Just a note for people who get invalid key resource errors with their gpg keys; the following
thread has the answer.
askubuntu.com/questions/1246031/gpg-invalid-key-resource-url-following-docker-official-guide
After some editing of the URL's it worked for me!
this didnt work. I tried everything. I followed this exactly and it did not work!!!!!
Hi, Don! 👋 I saw that you suggested changing the kernel to 5.6, but what is the exact 5.6 kernel? And what is the model and brand of your RX 570? Thank you if you can answer me. 🙏
In case if anyone is facing brightness slider not working issue, secondary monitor not working issue. This will solve your problems.
I getting this error:
Error while processing:
rocm-dkms
rock-dkms
How i can fix that?
I upgraded linux kernel to 5.6.10 and I finally removed the errors. You might want to try it.
If the drivers are already in the kernel and we don't need to update them, it means we they never get improved? how do I know i have the lastest version of graphics card (in my case a 5700 XT)
Okay I followed everything and now my external monitor doesn't works...
i got an error when checking 'rocminfo'..help me please
same here ,is you find solution
Can you suggest these changes to the official tutorial? I thing people who write a lot of official tutorials do not start with fresh install and have packages already install, so they are left out in the tutorials.
Why does it have to be so complicated.
Great..... Thanks🙏
Hi,
It don't work for 20.10 PopOS distribution :
Building initial module for 5.8.0-7625-generic
ERROR (dkms apport): kernel package linux-headers-5.8.0-7625-generic is not supported
Error! Bad return status for module build on kernel: 5.8.0-7625-generic (amd64)
Consult /var/lib/dkms/amdgpu/3.9-17/build/make.log for more information.
Ayy, it worked, thanks!
I keep getting an error when I do the 'sudo apt install rocm-dkms'. dpkg-deb: error: past subprocess was killed by signal (broken pipe). WTH does that mean?
Same error in my installation. I didn't found a solution
Try dkpg -I - -force-all (your Deb file)
It did solve my problem when installing deb files
For best use plasma discover which is best software center for kali linux or parrot os
does it also work with ubuntu 20.10? because im trying to get pheonixminer running but it also needs opencl
Were you able to get opencl running on ubuntu 20.10? I too am trying to get opencl support on my 5700xt so I can use phoenix miner. Haven't had any luck
@@TheObscuro77 i wasnt proud enough to try it on my main ubuntu system because i have way to much stuff on it 😅 i need to buy an spare ssd and try it there
Didn't work in my case. I think I gotta reinstall the DaVinci Resolve. The windows which were shown first do not open after I had "next-OK"ed them.
I installed Ubuntu 20.04 last week on my Asus gl503 and was soooo slow that I reinstalled it again but the minimum install and then it ran nicely but by that time it had left a bad taste so I went back to Mint xfc which is very fast and light in my asus...So far so good so I have it in 1 ssd and Mint Mate in the other ssd,,,flawless performance.
It did not work for me. All finished as described, but since that time my radeon hd6550m card is not used anymore. The lspci shows that there is radeon driver in kernel but not in use. Now only the embedded intel gpu is working. Could someone help me?
Im curious, seeing as you have the same GPU I do, have you by chance tried the DaVinci Resolve 17 beta 2. I am using the standard AMDGPU-PRO drivers installed with --opencl=legacy. doesnt work, So im wondering if youve touched it and your experience with it
I just finished installing it on my laptop with a nvidia mx150. Planning on trying this tomorrow. On my amd. I'll let you know how it goes
@@NovaspiritTech Awesome, thanks mate. I believe it to be an issue on the 'davinci resolve' side of things, as fusion appears to work fine. anyhow, +1 sub
I get stuck on the first step -.- After trying to do whatever that key thing is I get: Warning: apt-key is deprecated. Google had nothing that made sense that would fix this. Anyone have a tip?
Doesnt work on Ubuntu 22, but I found your Github guide. Will try it :)
i have updated and got it working for 22.04 recently. check my post
Thank you very much!!!!
fresh ubuntu-20.0.4 desktop install, update, full-upgrade, required reboots, etc. AMD RX480 8GB. upon running rocminfo I get: ROCk module is loaded [nl] Unable to open /dev/kfd read-write: Cannot allocate memory [nl] user is member of render group [nl] hsa api call failure at: /src/rocminfo/rockminfo.cc:1142 [nl] Call returned HSA_STATUS_ERROR_OUT_OF_RESOURCES: The runtime failed to allocate the necessary resources. This error may also occur when the core runtime library needs to spawn threads of create internal OS-specific events. [end] googling...
i can't for the life of me find the quicstart installation guide you used in the video
If you haven't found it yet its listed in the description, good luck!
@@adamthomas6643 it's totally different than what's in the video
installation completed but I still unable to use my DR16. Error msg:
Failed to connect to panel socket
DRIVER: open /var/tmp/davinci_socket failed
can you make a step by step for installing for APU support?
All your videos are useful
i can install DaVinci & OpenCL ,but i can not read mov file in DaVinci ,the video always blank in preview (i use intel graphics rx580)
how do you install resolve in ubuntu? from the .run file or makeresolvedeb tool?
Thanks,it works :)
Hi im getting bios error on booting. I have done everything... From changing bios values to bios update reinstalls, reinstall os.... Everything... But no use. Its still getting the error and going to the bios menu everytime i boot. Mine is amd 64, ryzen 5 acer nitro. Dual booted. Help plzz... Also i had issues with rocm , graphics, cannot view videos, debian files error, some broken files found.. Couldn't work with tensorflow, opencv, couldn't render videos...
When I tried this then an error is coming while running command - rocminfo : hsa API call failure, call returned HSA_STATUS_ERROR_OUT_OF_RESOURCES
same error for me, Vega 64
@@benagin7970 same error
rocminfo
ROCk module is NOT loaded, possibly no GPU devices
Unable to open /dev/kfd read-write: No such file or directory
What distro?
I've been following along pretty closely to this, but Linux is totally new to me. When I try to run the install command, I get "E: unable to correct problems, you have held broken packages". Wth does that mean? How do I fix it?
Awesome, I will try this on Pop os or Mint Cinnamon, what is your main OS?
on my laptop it's pop_os, my peakago mini laptop is eOS, and my workbench right now is on ubuntu 20.04
@@NovaspiritTech Hi Dan, unfortunately I have not been able to install this on Pop OS 20.04... Installs perfectly on Ubuntu, but Resolve still says that there is no OpenCL Graphics Card Installed
can i do this in elementry os ? elementry is based on ubuntu 18.04!
CyberPunk 2077 yes if its based on ubuntu 18.04 just follow the amd websites instructions it should work
Hi can you please tell me how to fix this?
Errors were encountered while processing:
rock-dkms
rocm-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)
The following packages have unmet dependencies:
rocm-dkms : Depends: rocm-dev but it is not going to be installed
Depends: rock-dkms but it is not installable
😑😑😑
This wouldn't work on Windows, right? Guess I'm screwed.
Thank you Bro
Setting up rock-dkms (1:3.10-27) ...
Removing old amdgpu-3.10-27 DKMS files...
------------------------------
Deleting module version: 3.10-27
completely from the DKMS tree.
------------------------------
Done.
Loading new amdgpu-3.10-27 DKMS files...
Building for 5.4.0-56-generic
Building for architecture x86_64
Building initial module for 5.4.0-56-generic
ERROR: Cannot create report: [Errno 17] File exists: '/var/crash/rock-dkms-firmw
are.0.crash'
Error! Bad return status for module build on kernel: 5.4.0-56-generic (x86_64)
Consult /var/lib/dkms/amdgpu/3.10-27/build/make.log for more information.
dpkg: error processing package rock-dkms (--configure):
installed rock-dkms package post-installation script subprocess returned error
exit status 10
dpkg: dependency problems prevent configuration of rocm-dkms:
rocm-dkms depends on rock-dkms; however:
Package rock-dkms is not configured yet.
dpkg: error processing package rocm-dkms (--configure):
dependency problems - leaving unconfigured
No apport report written because the error message indicates it's a follow-up er
ror from a previous failure.
Errors were encountered while processing:
rock-dkms
rocm-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)
Ubuntu 20.04.1, can't get rocm-3.9 to work with Resolve. It starts, and the GPU is shown in preferences, but the preview and edit windows are completely black. It does work with AMDGPU-Pro 20.40, but that has a weird bug where it doesn't spin up my GPU fan under load (VEGA FE). Does work on the FOSS drivers. Also, AMDGPU-Pro has a lot of problems with OBS. And Natron is totally broken. What a hot mess.
Couldn't make it work with Dell Inspiron 5570 Radeon 530 i5 8250u Ubuntu 20.04 and .1 and mint 20 and Pop!Os ... Davinci 16.2.5 still doesnt open
What's the difference between this rocm and official radeon amdgpu allopen drivers from their website? As I understand Ubuntu 20 version has none of them pre installed.
Do you have a video of how to install Raedon software or other GPU and CPU software? I know PopOS have AMD working out of the box but I am stuck trying to install the software to change settings. Any help or tips is mutely appreciated
WTF? How could installation of a library require a reboot? Installing drivers doesn't require a reboot either.
Didn't work here:
ERROR (dkms apport): kernel package linux-headers-5.8.0-7642-generic is not supp
orted
Error! Bad return status for module build on kernel: 5.8.0-7642-generic (amd64)
Consult /var/lib/dkms/amdgpu/4.0-23/build/make.log for more information.
dpkg: erro ao processar o pacote rock-dkms (--configure):
o subprocesso instalado, do pacote rock-dkms, o script post-installation retorn
ou erro do status de saída 10
Nenhum relatório apport escrito pois a mensagem de erro indica que é um erro de
seguimento de um erro anterior.
dpkg: problemas com dependências impedem a config
uração de rocm-dkms:
rocm-dkms depende de rock-dkms; porém:
Pacote rock-dkms não está configurado ainda.
dpkg: erro ao processar o pacote rocm-dkms (--configure):
problemas de dependência - deixando desconfigurado
Erros foram encontrados durante o processamento de:
rock-dkms
rocm-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)
Yea, I'm on kernel 5.6 and recently reinstalled it about a week ago. Won't work on 5.8 yet
I'm trying to get Resolve to work on my machine. It worked perfect in my virtualbox setup with PopOS 20.04, so I finally made the switch to PopOS as my new desktop OS, replacing Lightroom with Darktable, etc. Everything works except for Davinci Resolve.
I can't get it to start, just as you described. Tried this but ran into errors:
ERROR (dkms apport): kernel package linux-headers-5.4.0-7626-generic is not supported
Error! Bad return status for module build on kernel: 5.4.0-7626-generic (amd64)
I know for sure it's the openCL because I found this in the debug log of Resolve: OpenCL error -1: 'CL_DEVICE_NOT_FOUND', GPUPropertiesUtilUnix.cpp:360.
I have an older Radeon R7 card (Oland PRO [Radeon R7 240/340]) but I won't give up ;o)
Dell studio 1555 laptop, was trying Ubuntu live usb , how can I install the drivers when the laptop just shuts down minutes after the OS loads? Is it graphic card drivers error?
Didn't work for me in Ubuntu 20.04. I think it is because I already have AMD Pro drivers installed . I guess the 2 cannot live side by side. Typical dependency hell and I don't know Voodoo.
here the following message appears
usermod: group 'render' does not exist
Can you please tell the kernel version used in this video because i am getting error while installing in kernel 5.0.8
Update to Ubuntu 2204
I got E: Malformed entry 1 in list file /etc/apt/sources.list.d/rocm.list (Suite)
E: The list of sources could not be read.
EDIT: I fixed that, now stucked on rocm-dkms installation command. Tried to do this on Synaptic and it gives me the same message:
Depends: rocm-dev but it is not going to be installed
Depends: rock-dkms but it is not installable
Depends: rocm-core but it is not going to be installed
How to solve this?
Substantially, rocm-dev needs rocm-core and I solved this but rock-dkms is like...no longer available. Could you do a video with Synaptic Package Manager guide? I think it's easier that Terminal because terminal tends to give errors but no clues.
Hi. I wanted to ask if RX 6700 is compatible with ROCm. I was wondering if I could train deep learning models on that GPU.
Would this solve the issue with AMD GPUs not being able to screen record at 60FPS (using something like SimpleScreenRecorder or ffmpeg, for example)?
This helped a lot but once I managed to open DaVinci Resolve, I cannot see the thumbnails or any image at all. I cannot see the video playing but I can hear sound. I'm about to give up on Linux. :(
My specs:
Vega 56
Ryzen 2700X
G Skill Trident Z
Samsung Evo 970