Alfa Romeo Giulietta Boot Release Button Replace Refit and Clean
HTML-код
- Опубликовано: 9 мар 2022
- In this Alfa Romeo Giulietta Veloce video we remove, repair refit the boot/trunk release button if it's not working/failed
#Vialettotony
#Giulietta
Similar for QV/Cloverleaf, Mito, 157, 159, Brera, Lancia, Fiat. Like & Subscribe for more how to videos. Battery replacement, Trunk/Boot Wiring Looms, Air/Cabin Pollen Filter, MAF Mass Air Flow Sensor Fix Cleaning tuning, PCV valve, Fuel/Gas Filter, Steering Fault Codes Fixed, Passenger Airbag Light, Electric Windows, Anti Roll/Sway bar Bushes, Drop Links, Brake Discs, Pads, Fluid Flush, Springs, MOT Preparation 2.0 JTDM 170
Oggi rimuoviamo, ripariamo rimontiamo il pulsante di sblocco boot/trunk se non funziona/non funziona
Metti mi piace e iscriviti per altri video su come fare. Sostituzione della batteria, cablaggi bagagliaio/bagagli, filtro antipolline aria/abitacolo, sensore di flusso d'aria di massa MAF correzione correzione della pulizia, filtro carburante/gas, alzacristalli elettrici, boccole barra stabilizzatrice/barra oscillante, maglie di caduta, dischi freno, pastiglie, lavaggio fluido, molle
Aujourd'hui, nous retirons, réparons et réinstallons le bouton de déverrouillage du coffre/coffre s'il ne fonctionne pas/a échoué
Aimez et abonnez-vous pour plus de vidéos. Remplacement de la batterie, faisceaux de câbles de coffre/coffre, filtre à air/habitacle, réglage du nettoyage du capteur de débit d'air massique MAF, filtre à carburant/gaz, vitres électriques, bagues anti-roulis/barre stabilisatrice, liens de chute, disques de frein, plaquettes, rinçage de liquide, Ressorts
Dzisiaj usuniemy, naprawimy, zamontujemy przycisk zwalniający bagażnik/bagażnik, jeśli nie działa/nie działa!
Polub i zasubskrybuj, aby uzyskać więcej informacji o filmach. Wymiana baterii, wiązki przewodów bagażnika/buta, filtr przeciwpyłkowy powietrza/kabiny, regulacja czyszczenia czujnika masowego przepływu powietrza MAF, filtr paliwa/gazu, elektryczne szyby, tuleje stabilizatora/kołysaka, cięgna, tarcze hamulcowe, klocki, spłukiwanie płynem, Sprężyny
Vandaag verwijderen, repareren we de opstart-/kofferbakontgrendelingsknop als deze niet werkt/niet werkt
Like & Abonneer voor meer how to video's. Batterijvervanging, Kofferbak/Bootkabelboom, Lucht/Cabine Pollen Filter, MAF Massa Luchtstroom Sensor Fix Reiniging tuning, Brandstof/Gasfilter, Elektrische Ramen, Stabilisator/Sway bar Bushes, Drop Links, Remschijven, Pads, Fluid Flush, veren
Símera afairoúme, episkevázoume to koumpí apelefthérosis bótas/kormoú, eán den leitourgeí/apotýchei
Kánte Like & Subscribe gia perissóteres pliroforíes schetiká me ta vínteo. Antikatástasi batarías, argaleioí kalodíosis portmpankáz/bótas, Fíltro gýris aéra/kampínas, syntonismós katharismoú epidiórthosis aisthitíra roís mázas aéra MAF, Fíltro kafsímou/aeríou, ilektriká paráthyra, daktýlioi antistrófixis/talántosis, sýndesmoi ptósis, dískoi frénon, takákia, ékplysi ygroú, Elatíria
Heute entfernen, reparieren und montieren wir den Kofferraum-Entriegelungsknopf, wenn er nicht funktioniert / ausgefallen ist
Like & Abonniere für mehr Anleitungsvideos. Batteriewechsel, Kofferraum-/Kofferraum-Kabelbäume, Luft-/Innenraum-Pollenfilter, MAF-Luftmassenmesser-Fixreinigung, Tuning, Kraftstoff-/Gasfilter, elektrische Fensterheber, Stabilisator-/Stabilisatorbuchsen, Drop-Links, Bremsscheiben, Bremsbeläge, Flüssigkeitsspülung, Federn
Hoy quitamos, reparamos y volvemos a colocar el botón de liberación del maletero/arranque si no funciona/falló
Me gusta y suscríbete para obtener más videos sobre cómo hacerlo. Reemplazo de la batería, mazos de cables del maletero/maletero, filtro de polen de aire/cabina, ajuste de limpieza del sensor de flujo de aire masivo MAF, filtro de combustible/gas, ventanas eléctricas, bujes de barra estabilizadora/estabilizador, enlaces de caída, discos de freno, almohadillas, descarga de líquido, muelles
Hoje removemos, reparamos e reinstalamos o botão de liberação de inicialização/tronco se não estiver funcionando/falhou
Curta e Inscreva-se para mais vídeos de como fazer. Substituição da bateria, fiação do porta-malas/cabine, filtro de pólen de ar/cabine, ajuste de limpeza do sensor de fluxo de ar em massa MAF, filtro de combustível/gás, vidros elétricos, buchas da barra estabilizadora/antirolagem, links de queda, discos de freio, pastilhas, descarga de fluido, Molas
Danas uklanjamo, popravljamo i postavljamo dugme za otpuštanje prtljažnika/prtljažnika ako ne radi/pokvari
Ma eltávolítjuk, javítjuk, visszaszereljük a rendszerindító/csomagtartó kioldó gombot, ha nem működik/meghibásodott
Danas uklanjamo, popravljamo i postavljamo gumb za otpuštanje prtljažnika/prtljažnika ako ne radi/pokvari
Astăzi scoatem, reparăm butonul de eliberare a portbagajului/portbagajul dacă nu funcționează/nu a eșuat
Sʹohodni my znimayemo, remontuyemo, vstanovlyuyemo knopku rozblokuvannya bahazhnyka/bahazhnyka, yakshcho vona ne pratsyuye/vyyshla z ladu Авто/Мото
Cheers Tony, fixed mine this morning. Couldn't separate the button cap from the housing like you did so I just sprayed engine degreaser in all the holes and around the cap and it flushed the crud out. I didn't have the nerve to try and lever it out. I am heavy handed and would probably have bent or crimped something. Many thanks buddy and keep up the awesome vids
And my button is slightly different from yours
Great work. Glad it helped. Thanks for the kind feedback. All the best 👍
Your page should have a million or more of subscribers. Great video. Salutes from Portugal.
Thanks Marc. Really appreciate it. Have a great day. All the best from England 👍
Tony your commitment to getting these videos out is priceless. I'm now so much more confident tackling repairs on my Giulietta QV Supporting you all the way mate. Thanks so much! 🇦🇺
Hey mrcaps1971. That’s great to hear. Stay safe down there. All the best 👍
Exactly what I needed to know to replace my button cover. It's been worn over the years and needed a fresh face
I bought a cheap replacement cover. Can you just refit it, or would you need to modify it? It's a cheap flat aftermarket one, without any hooks or clips.
Giulietta 2018 owner here, actually in my car, there was not enough clearance between black strut that is inserted into the silver part (shown at 6:08). The black part outer diameter was 15.70mm and the hole was just 15.62mm- had to drill a bit and it clicks smoothly now. Sorry it's hard to explain when writing but just check the silver part hole diameter. The problem wasn't about dirt/lubrication, but parts not fitting well
Brilliant. Looks like a previous owner of my Giulietta has messed around with that button at some point as it doesn't sit quite right. I'll be taking it off and having a look at it soon.
Great video ,nicely explained and easy to follow.Great work.Mine stopped opening the boot both by the button and remote.I could hear a faint clicking noise upon depressing both but obviously not opening.Next week I will be doing as you kindly showed us in your video and hopefully it's nothing else than a good clean up.
Keep up the good work .Cheers.
We respect your committment.
Thanks, Tony ! I have to fix mine too ! Great content as always !
I was tempted to do this on mine, thanks for giving me confidence in how to do the job correctly!
Just needed this, thanks man! Great tutorial
Always welcome 👍
Thank you. Most grateful.
Great job.. thank you very much for video
cheers buddy
👍
Hi, Love the Videos, they been my go to for repairs and checks on my Alfa. I have recently purchased an Illuminated Boot Lid Release Button, any idea how i can connect power to it only when i have lights come in in the dark (was thinking side light patch but not sure if that's do able all the way to the boot) .. any ideas appreciated.. keep the videos coming Tony.
Hi AViT. Thank you. You should be able to pick up a live for the tailgate lights I’m fairly sure. Separate feeds on each side. Not sure which cable though. Shouldn’t be an issue though I’m fairly sure. All the best 👍
I've just fitted a brand new £66 button unit , but the boot still won't open on the key fob or by pressing the button (I've been using the emergency release). I assume the problem could be the wiring loom into the boot door or, possibly, a blown fuse (Although I can't see a specific fuse listed in the handbook).
Any suggestions welcome!
Thank you for these invaluable videos!!!
Yeah I’d say wiring loom. If you can get to the button terminal, you could try putting a multimeter across the cores while you activate it. Good luck. All the best 👍
Hey Tony; thanks for showing us how - this is really helpful. One thing though, my boot is stuck shut, how do I get it open to remove and fix?
Hi ThinkKerry. Have a look at the “kidnap” video on my channel. Shows the emergency release. 😎. All the best 👍
m.ruclips.net/video/JIjstv8YK3k/видео.html
Hi Tony, thanks for this video, do you know by any chance how I could get the button's switch replacement? is there any part number?
I've followed every step from your video but there is rust on the buttons cables and the boot is only opening with the key I suspect I need the badge's connector replacement.
cheers!
Hi . you could try a breakers yard, or even eBay, but i don't know anything more than that i'm afraid. All the best 👍
Thank you for all your videos . If the black plastic clips broke what can I do?
Try putting it together as I believe the circlip should hold it in place. If it doesn’t work, then you may need to buy a new one.
Thanks for watching. All the best 👍
@@vialettotony thank you so much for your fast reply . Greetings from Greece
Hey Tony, so I’ve been to a garage to change my rear wiper. After which radio is shiftting stations above 100mhz. After which my tail gate won’t lock untill I press it down when I hit the lock button. Mechanic is dogging my calls now and saying radio cable got broken somewhere and I need a new lock for a tail gate. Do you have any suggestion how to fix the lock at least?
Hi. Have you checked the common rear wiring loom? So many of these are all in the right hand loom when you open the boot. Did you see the video on this yet? All the best 👍
Your videos have helped me so much. Thank you!!
Have you advice on this issue - my boot won’t open with key fob or by pressing on the badge. It does open using the emergency button on the inside though. It also does pick up that the boot is open when I do use the emergency switch. So I’m assuming it is getting power.
I can’t figure what might be wrong. When I press the key the lights flash and I here a tiny tick noise in the driver seat area but no unlock of the boot. Any idea what it could be?
Time for a new lock? Perhaps that little motor in there has gone?
Hi Sheldon. Thank you. The boot open sensor is actually a small switch to the left of the catch as far as I know. It sounds like a wiring loom issue to me. If you have a multimeter you could check for power at the plug when you press the button. Hope that helps. All the best 👍
@@vialettotony THANK YOU for replying and for the advice.
I’m definitely gonna give that try! Thanks again!
I have exactly the same problem. The click is from a relay in the fuse box in the driver side footwell. My first thought is it's a wiring loom issue. Did you get yours fixed?
Mr Tony ur videos are amazing, thank you, I have some problem with my Giulietta: the boot door light came on in the car display even though the door is closed, do u have some information about it? Thank u
A few people have asked about a video for this. I’ll see if I can get something together. All the best 👍
@@vialettotony Thank you, the wiring in the boot door was broken. I have fixed already, The white one. Now working very well 👍
Is this the same system on the later 2014/2016 models?
Hi. Not 100% sure but I believe so. Thanks for watching. All the best 👍
Hi. Thx for video.. can you tell me is it difficult to replace front alfa romeo badge? Do i need to remove front bumper to replace badge? Thank you
No need to remove the bumper to replace the badge. They’re only glued on. I’d recommend taking the old one off from the middle outwards to avoid damaging the edges of the surround. All the best 👍
@@vialettotony I understand..thank you very much
Whete did you buy the replacement button?
Hi MKHyped. I didn’t need to buy a new button as cleaning it out as I did made it work perfectly. Hope that helps.
All the best 👍
What cleaner did you use to clean your button?
Hi Andy. I can’t remember to be honest. Knowing me, I’d say soapy water for the plastic and badge parts and probably electrical cleaner for the switch. I have some MAF cleaning spray which also worked for the faulty electric window switches too. You can see it in this video
m.ruclips.net/video/ZG7Ewg2ilBc/видео.html
Hope that helps. All the best 👍
@@vialettotony Thanks for the response, I've got contact cleaner that I'll try.