Samsung Galaxy J3 (2016) Screen Repair, Teardown and Reassemble - Fixez.com

www.fixez.com presents the official Samsung Galaxy J3 (2016) Screen Repair, Teardown and Reassemble Guide. This step-by-step repair video will show you how to replace a broken or damaged Galaxy J3 display assembly, and also how to completely teardown and reassemble your 2016 Samsung phone. Visit Fixez.com for all of the DIY Samsung Galaxy J3 (2016) replacement screens, parts and tools you need to quickly, and affordably, fix your device! www.fixez.com/
If you need your Galaxy J3 (2016) repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or [e-mail] and they will fix your Samsung smartphone for you. They are available Monday to Friday, 9am to 5pm PST.
Subscribe to our RUclips Channel for additional DIY smartphone and tablet teardown and repair videos! / @fixez
Like us on Facebook: / fixez.com
Follow us on Twitter: / fixezdotcom
Samsung Galaxy J3 (2016) Screen Repair, Teardown and Reassemble Guide Video Steps:
Warning:
You are performing this repair at your own risk
We claim no responsibility for any damages that might occur
The DIY Galaxy J3 repair tools used in this video can be found here: www.fixez.com/...
Step 1 - Power down your 2016 Samsung Galaxy J3 smartphone.
Step 2 (Samsung Galaxy J3 (2016) Rear Battery Cover) - Easily remove the Galaxy J3 rear cover.
Step 3 (Samsung Galaxy J3 (2016) Battery) - Take out the 2600 milliampere-hour (mAh) Samsung Galaxy J3 (2016) battery.
Step 4 (Samsung Galaxy J3 (2016) Exterior Midframe) - Remove the following 10 Phillips screws. Apply a little heat, and then use the triangle opening tool to work around the Samsung phone and free the exterior midframe.
Step 5 (Samsung Galaxy J3 (2016) Loudspeaker) - Eradicate the Galaxy J3 loudspeaker box from the midframe.
Step 6 (Samsung Galaxy J3 (2016) Motherboard) - Detach the cable for the bottom LED buttons and then the display cable. With the cables out of the way, lift out the Galaxy J7 motherboard.
Step 7 (Samsung Galaxy J3 (2016) Headphone Jack, Front-Facing Camera and Rear-Facing Camera) - Detach and remove the Galaxy J3 headphone jack. Spudge up the 5-megapixel Samsung Galaxy J3 front-facing camera. Release the ZIF connector and free the 8-megapixel Galaxy J3 (2016) rear-facing camera from the motherboard.
Step 8 (Samsung Galaxy J3 (2016) Earpiece Speaker and Vibrator) - With the tweezers in hand, remove the earpiece speaker. Pluck out the spring-contact-connected Galaxy J3 vibrator.
Step 9 (Samsung Galaxy J3 (2016) Display Assembly) - Begin too free the Galaxy J3 Super AMOLED display assembly by using the heat gun to warm up the adhesive. Insert a playing card to start slicing through the adhesive. Use playing cards to attack the adhesive securing the display assembly to the interior midframe. Take your time and apply additional heat as needed. Once you have sliced through the adhesive, be mindful of the display cable and the cables for the bottom buttons when decoupling the 2016 Galaxy J3 screen from the midframe.
Step 10 (Samsung Galaxy J3 (2016) Cables for the Bottom Buttons and Home Button Switch) - Extract the cables for the bottom buttons and Galaxy J3 home button switch.
* To reassemble your device, follow the steps in reverse order.