How to wire the Laser Controller to Stepper Motor Drivers
HTML-код
- Опубликовано: 9 авг 2016
- Please watch: "Buildyourcnc CNC Router on Love Yurts"
• Buildyourcnc CNC Route... -~-
I show how to connect the Laser controller to the stepping motor drivers.
You can find our Motion Electronics here:
www.buildyourcnc.com/electron...
You can find our 3.0 amp Driver here:
www.buildyourcnc.com/item/ele...
You can find our Laser Components here:
www.buildyourcnc.com/LaserCom...
You can find this Laser Cutting and Engraving Controller here:
www.buildyourcnc.com/item/Las...
BuildYourCNC Homepage:
www.buildyourcnc.com/
Equipment that I use to make videos:
Canon EOS Rebel: amzn.to/2rJSeh0
Macro Lens: amzn.to/2qaSKmK
Microphone: amzn.to/2qO2RB4
3D Mouse to rotate/zoom/move the object (Must have for CAD!!!): amzn.to/2ruFnSn
The drafting pencil I use on these videos: amzn.to/2qioYg2
The cheap oscilloscope that I use (because it's cheap and will work all of the projects in these tutorials): amzn.to/2rSHnBa
A better oscilloscope and the one I would recommend: amzn.to/2qizK5M
The brand of multimeter that I use and the one I recommend: amzn.to/2qicUez
Want to have your own Patreon campaign? / wpllxz 
Наука
![Rob49 - On Dat Money (with Cardi B) [Official Video]](http://i.ytimg.com/vi/fTFS58mHJh8/mqdefault.jpg)
Hi! A huge Thanks for your job !
Thanks for sharing. How do you connect Z axis motor directly without a driver?
Very nice explanation
Hi Patrick Thanks for you video. I change my controller and used this info. Im a left with a slight problem. The laser fires when traveling to its origin and then when it returns when job is completed. Also there is no variance of heat. It wont fire at 21% but full power at 22%. This didn't happen with the old controller. I have searched and found no help anywhere. Hope you can. Thanks
Scott
Since there are no more ports open on the power supply, what if you wanted to setup another driver for say the Z axis motor? Can you just run two wires to one of the ports on the power supply?
is this method the same for all types of controller boards?
Can two connections go on the same terminal on one power supply?
can you please link the previous video or just type its title ?
thank you
Do you have a vid of the wiring to the laser it self, for CO2 laser?
Thanks for the video(s)!
Is it not necessary to solder the wire before connecting it?
It's not strictly necessary but I like to do it so that the wire has more substance when you secure it.
I want to use a controller like the one you use here, but I want to move two motors for the Y-axis. I want to use two drivers but the same signals for the Y-axis feeding both drivers, thus both motors. Will the motors stay synchronized?
Yes, just connect the same y-axis pulse and direction signals to both of the drivers.
hy brother i have laser machine 100 waat can u help me when i turn on machine with watter coller the lcd of machine bilinking and also bilinking light of ruida contloer light no 15 with beep
plz can u tell me what is problem
can you please show me a video how to use mach3 usb board to control co2 laser?
It's best to use a traditional DSP laser controller, but you can switch the laser on and off using the outputs of the Mach3 USB.
@@PatrickHoodDaniel you have any configuration video for mach3 laser control?
So, how would you wire if you want to change direction but you say they are negative?
You can do this in the LaserCAD software, or you can wire the A and B coils in reverse. That is to say, put the wires meant to be on the A+ and A- to the B+ and B- and vice versa.
Great, I`ll do that. Do you have videos for LaserCAD? I used to use inkscape but recently upgraded to awc708 board so I guess i need to learn how to use laserCAD
nothing about switches pinout?
“Pultz”
Ground should really be a green wire NOT black! Black is used for Hot wire!
please edit out the repetitive items.
This video might be intended for "limited" abilities people - Like those that just can't figure out how to skip a section of a RUclips video.
*hint* *hint* ;)