PRIORITY SCHEDULING PREEMPTIVE AND NON-PREEMPTIVE | CPU SCHEDULING ALGORITHM| OPERATING SYSTEM

[@Judy-sp4ry]

salamat po. very helpful po talaga.

[@ITSInfoTechSkills]

Thank you so much po😊

[@kathleenlita764]

For preemptive example number 2 po, yung sa average waiting time ni p5 it should be 4-2=2 since ang formula po is turnaround time minus cpu burst. tapos po sa pagcompute ng average wt po sa p4 6-3 = 4 nakalagay dapat po ang difference is 3 thanks po

[@josecabrerosii6281]

Smooth lang, napakalinaw.. mas malinaw pa sa pagtingin nga, charot. Salamat po

[@ITSInfoTechSkills]

haha thank you so much po😊

[@neilmarkluspo811]

Maraming salamat ma'am! 😍🥰

[@omegalol541]

SALAMAT PO NG MARAMI
SANA PO MAKAPASA SA REPORTING

[@ITSInfoTechSkills]

Yes po, Good luck and thank you so much 😊

[@itsmenoty0]

thank you mam ❤️

[@ITSInfoTechSkills]

Most welcome 😊

[@smallblackcat1998]

bat mali yung first example it should be 26-17=9 not 11

[@ValenciaAngelynR.-ld7iy]

Thank youu po! ❤

[@ITSInfoTechSkills]

You're welcome 😊thanks din po

[@jenefanacua785]

ITS maraming salamat po sa preemtive po yon arrival time from 0-4 then ang priority time is sunod sunod 2,3,4,55 yan lang wala na palang remaining time kasi sunod sunod naman salamat po reply. Isa lang naman ako sa mga subscriber niyo po.♥️

[@ITSInfoTechSkills]

Thank you so much po, and good luck po sa study nyo po😊

[@HiganbanaThatBlooms]

What if ung first na given sakin is may arrival time na 3 and priority is 3(given A).. bago ung next na given sa kniya which is is B is may arrival time na 0 bago priority na 5? should i start sa B or A?

[@ITSInfoTechSkills]

sa B po kc at time 0 dumating na sya..it means ung B ang unang process

[@HiganbanaThatBlooms]

@@ITSInfoTechSkills salamat po!

[@jenefanacua785]

Nag base po ako sa example 1: Preemtive tama po ang gantt chart ko.

[@jenefanacua785]

Hello po matanong lang po kapag ang arrival time is 0123 then ang CPU Burst is 2,12,8,10 at ang priority is 2413 (4processes)po wala nabang remaining time sa P1 at P2 kasi ang una ma i process si P3 kasi priority 1 siya.

[@ITSInfoTechSkills]

base from the arrival time mauunang iprocess si P1 kc sya palang ung meron at time zero then followed by p3. wala pong putol si p1 kc at time 2 saktong tapos na sya nad ung din ang arrival time nung p3

[@alfaizerqt3222]

Sa non-pre emptive po, may starting time?

[@ITSInfoTechSkills]

Depende po sa given, if walang arrival time po you can consider po na sabay sabay sila dumating

[@johncarlojornales9856]

mam sorry po mali po ata ung 26 - 17 = 11 nalito po ata kayo ehhe .................. dapat po 9 lang po ang sagot. but Nice tutorial po. Thank you for this video.

[@ITSInfoTechSkills]

sorry for that ndi ko napansin un..Thanks din po😊

[@johncarlojornales9856]

oks lang mam tao lang hehe, mejo lito lang ako mam re: non preemptive at preemptive, kaya napunta ko dito heheh.

[@vashhazzelrobenta6122]

hays nagulat ako kala ko ako mali HAHAHHAAHHA.

[@johncarlojornales9856]

@@vashhazzelrobenta6122 tagal na pla nito mam.

[@wiewie2365]

pano pag mas mataas yung pangalawang burst time sa unang burst time?

[@ITSInfoTechSkills]

follow parin po ung priority

[@jenefanacua785]

Salamat

[@jenefanacua785]

Hello po pwede bang magtanong kapag si process ay papasok ni cpu at hindi na siya lalabas kasi tuloy tuloy ang priority number niya wala na bang remaining time? Pakisagot po.

[@ITSInfoTechSkills]

kung matatapos nmn po ang process wala na pong remaining time

[@saragaedsyljhonp.7984]

What if po example yung arrival time ni P1 is 1 pero si P5 is may arrival time na 16 at priority number 1 sino pong mauuna maexecute?
please help

[@ITSInfoTechSkills]

first parin pong maexecute si P1 kahit mas mataas ang priority ni P5. that is bcoz ant time 1 wala pa naman si P5

[@SADGEMAIN]

What if both P1 and P2 may 0 arrival time? Priority time po ba basis? Pano po to ilagay sa gantt chart?

[@ITSInfoTechSkills]

If same po ang arrival time ng process ang titignan is ung priority

[@jastinelaplano786]

Pano po pag parehas ng priority? san po mag bbase, sa arrival time po ba or sa burst? Thank you po

[@ITSInfoTechSkills]

Arrival time po

[@jastinelaplano786]

@@ITSInfoTechSkills Thank you po

[@jastinelaplano786]

@@ITSInfoTechSkills pano po pala pag same ng arrival time? for example po P1 arrival time is 0, burst 6 and priority is 0, then P2 arrival time 0, burst 3 and priority 2. Alin po sa dalawa yung mauuna?

[@ITSInfoTechSkills]

If shortest job po ang scheduling na finafollow ung shortest ang burst time ang mauuna, iba nmn po if ung priority

[@jastinelaplano786]

@@ITSInfoTechSkills pano po pag ang algorithm nya isa non-preemptive?

[@kiksmix07]

Preemtive example 2.. Ung sa WT=TT-CPU Burst
Sa P5 =14 - 2 =12.. dba dapat P5 = 4 - 2 = 2?

[@ITSInfoTechSkills]

Kung titignan niyo po ung Gantt chart na tapos ang Execution ni P5 at time 14

[@nolicrisejusa2236]

thankyou you save me but your too fast to explain gossh but anyway thanks a lot