What's Tony Hawk's Board Setup?
HTML-код
- Опубликовано: 7 сен 2024
- Watch the full episode: • Tony Hawk - Stop And C...
Subscribe to our RUclips channels:
The Nine Club: / @thenineclub
Nine Club Highlights: / @nineclubclips
2dudes1game: / @morenineclub
Want to support us? Become a member: / @thenineclub
New Nine Club episodes every Monday and Nine Club Experience episodes every Wednesday
--------------------------------------------------
This Episode brought to you by:
Dickies: www.dickies.com
Manscaped - Enter NINECLUB20 for 20% off: www.manscaped.com
Santa Cruz Skateboards: santacruzskate...
Mob Grip: mobgrip.com
Ricta Wheels: rictawheels.com
Check out all our Deals and Discounts: thenineclub.co...
--------------------------------------------------
Want more Nine Club? Check out these playlists:
The Nine Club: • The Nine Club
The Nine Club Experience: • Nine Club EXPERIENCE Live
Nine Club Highlights: • Most Recent Clips
Pick up official Nine Club march: thenineclub.co...
Chris Roberts Chocolate Decks: thenineclub.co...
Listen to The Nine Club on audio podcast: thenineclub.co...
Contact us: thenineclub.co...
----------------------------------------
Edited By: Tim Olson, Chris Roberts & Roger Bagley
Special Thanks: Eric Longden
----------------------------------------
Follow The Nine Club:
Instagram: / thenineclub
Twitter: / thenineclub
Facebook: / thenineclub
Website: thenineclub.com
Follow The Nine Club Experience:
Instagram: / thenineclubexperience
Follow Chris:
Instagram: / chrisroberts
Cameo: www.cameo.com/...
Twitch: / chickennuckles
RUclips Channel: www.youtube.co...
Twitter: / chris_roberts1
Follow Jeron:
Instagram: / jeronwilson
Follow Kelly:
Instagram: / kellyhart
Twitter: / kellyhart
Snapchat: / kellymhart
Facebook: / kellyhartskate
Products we use to make the show: www.amazon.com...
#Skateboarding #Podcast #Interview SandC
The best ambassador for skateboarding out there
idk man mullen is pretty good too....
@Dane Gonzalez Tony is a great public figure/ representative of skateboarding imo. We owe it to him as skaters for giving skaters a good name and maintaining a professional and respectable image. Especially considering his rapid sling to success... My guy remained humble asf
@@TrevorsCrabs Mullen is good but Tony is the literal ambassador of skating. Hard to say if skating would be here in this capacity without him trailblazing the way for us all. Hes definitely the face of skating. The stan lee . The godfather.
@@demonboy619 ... if there was Rodney Mullen Pro Skater Video games instead of tony, nobody would even know who tony was... He would be just another vert skater
@@TrevorsCrabs That's crazy talk. You must be young. Tony was beating literally everyone in vert competition in the 80's and 90's. He was the vert GOAT long long before the playstation or nintendo games. I'm a huge fan of both of Tony and Rodney. Rodney is by far the best freestyle skater ever no question about it, and one could even argue he grew into the best street skater as well, not to forget Rodney is literally a genius. However Hawk owned vert and Rodney thought they were crazy skating vert, he has literally said he was scared of big vert. Ask the Mega ramp guys like Bob Burnquist and Danny Way and even they will tell you Tony's the goat.
I love the simplicity of his setup. It’s funny because I actually just got 60 mm bones park wheels, ride an 8.5 deck, and for bones hard bushings to try out soon
What's wild is I grew up watching Tony Hawk and BAM of course. I also count the threads on the bolts of my trucks. Never knew Tony did, or I don't know anyone else that does. I recently just got my 7 year old dropping in on the 1 footer and went to the 4 foot half pipe and he literally dropped in (with me right there with my arms basically around him) on a 7.75. There was about 3 drop ins where I didn't touch him and he did it by himself!! Was amazing! Proud dad moment for it being his 5th or 6th day at the skatepark and FIRST day on a skateboard!!!! He had grown men impressed and one brought up that he would be the next "Birdhouse" hahah :) I watched Tony Hawk Shred it up at Boom Boom Huck Jam at Six Flags back in the day. Was so sick! Met BAM, Mike Vallely and the element crew at the Element shop at Universal Studios in Florida Back in the day. Anyway I hope everyone has an amazing day/night wherever you are and keep shredding!
The Swiss and ceramics spin at the exact same resistance. The ceramics are for heat absorption and the Swiss are for impact. If you are a street skater you want to be skating the Swiss.
I actually have a bones Swiss bearings on my freestyle skateboard. (Old school with flat nose mellow kicktail T -hangers trucks with hard 98a hard bushings 2 threads showing when I tighten my t-hanger trucks. With indy 1/4th riser.)
I need to see a Signature Tony Hawk Vans shoe
My friend got a leak a few months ago, it looked a bit like the sk8 hi's
He rides lakai shoes I'm pretty sure
@@benwright4006 Riley rides for them so Tony did,he is back on vans...BUT,Tony was never officially on Vans....ever....crazy eh??
@@timothyphillips4801 what are talking about? Tony was on Vans, then Lakai, then back to Vans.
@@timothyphillips4801 you even said, "he's back on Vans," then said he never was on Vans. LoL! 😂🤣
Bones can't afford to give Tony 20-25 sets of ceramics a year? Seriously that's like $1000 their cost if that. Smh
As a vert skater I feel the tightened down trucks. Mine are always cranked down.
Bones Swiss ceramic at that price is like Apple charging 700 for their mac wheels.
i went from riding a 8.6 zigzagger, to a 8 pizza board. big change for sure for me. size 11 shoe. also went from 65mm wheels to now 45mm, it's like learning to skate again. glad he also rides tight trucks too
Why go smaller?
@@Gk22632 went smaller mainly cause I was using a cruiser board for so long and the 8.0 ended up being too small so I bumped up to an 8.5 with 56mm wheels. Pretty happy there for now, I'm not a technical skater by any means
Back in the early 2000s I rode 7.5 - 7.75 with size 10 feets. Recently got a 8 inch and it feels yuge.
Used to ride 7.5 or 7.75 (forgot) but friends convinced me to bump up to 8. Easier to ride for bigger feet but harder to trick on.
7.75 feels like a pencil eraser to me lol, my sweet spot is 8.125
@@zarate1om 8.375. I used to say id never ride anything bigger than an 8.25 but they didnt have it at the shop. Now i love 8.375
8.5 here and i can still triple flip, 540 flip, kickflip late shove and so on
Tony Should Be Riding a ''9in Deck With 161mm Indy's stage 4s and some 60mm wheels''
166 AcTuAlLy 🤓
This is so funny. Talking about set ups. I ride a size 9.0 anti hero, or if I find a Baker 9 popsicle or a Toy machine , I’m down. Just recently though, I got a 7.3. I am 21 and it’s really small Becuase it’s designed for a kid, but it’s fun Becuase it’s a shorter wheelbase , and it’s super tech.
7.5 was pretty normal for adults in late 90s/early 2000s.
I started in 1996 on a 7.5 and now I'm on a 10.1 😵💫 I'm starting to back down in size, just got a 9.0 pop 🤣
Fury trucks lol 😂 Indy finally gave him a chance only took 35 years
This guy looks a lot like Tony Hawk.
bones swiss ceramics $159.99 USD lol
And god forbid tony give his away every few weeks. Jeez bones
@@0shitferbrains0 I know right?....way to go George...
@@0shitferbrains0 at every 2 weeks it ends up being like 4 grand a year.
I wear 13's also but my feet are 3E wide. I wear Globe Sabres as they are the widest I have found but the heel of the sole is a few millimeters too small. I wondered if there was one that was a skate show that was a little wider for stability without going up a size because that feels like your foot slides allover.
Glad to know that I rock Birdman style, tight trucks for life 😎
No one going to mention Tony's helmet? AND knee pads! 😂
nothin wrong w being safe
Isn’t that the guy that rides for Kryptonics??
Yeah,and tracker trucks....🤫
00:08 I got that Cab flight deck. It is the dopest board I've ever had.
He's riding 60mm wheels without risers. I'm assuming he would have wheel bite problems, if he didn't ride tight trucks. I want to get some bigger wheels to see if it helps riding on rough pavement. Not sure I really want to add a riser though.
At that speed on vert he could definitely get wheel bite
@@lamBETTERthanY0U Indy's website recommends 1/8" to 3/8" riser for wheels 57 to 60 and 3/8" to 1/2" for 60 to 65. It recommends a 1/8" riser for 55 to 58. And no riser for 49 to 55. I'm thinking if you like your trucks loose, you probably need a 1/4" or maybe 3/8" riser for 60mm.
Until u hit 56mm u don't NEED risers, but I ride 57 and 60s, and have 1/4 risers on both. I like to turn quick w/ looser trucks, so w/ the 60s i gotta know where the wheel bites, but putting a little wax on the bite helps if I turn too hard.
Try some new shxt on ur setup, it'll make u a better/ more dynamic sk8r.
If you want a smoother ride for rough pavement without having to use risers, try a softer wheel rather than a larger one. You dont have to go super soft like 78a that is common for cruiser wheels, try something like 87a or 90a.
@@ejb7555 I've tried a bunch of different wheels since posting this. For cruising on rough pavement, my current favorite are Mini Logo AWOLs. I tried 55mm, 59mm, and 63mm. I found that wheel width seems to make a big difference as well. I'm not sure why, but, I think that's part of why the AWOLs are much faster than other wheels that I've tried. They are around 40mm wide if I remember correctly. The only thing not to like about them is they are 80A so they aren't the greatest for slides. You can slide, but, you have to lay into it. I also tried 85A and 90A 60mm Rat Bones, 97A 64mm G-Bones, and 101A, 95A, and 90A Mini Logo A Cuts ranging between 53mm and 60mm. I found that soft wide wheels are the fastest on asphalt. The AWOLs are a pretty awesome cruiser wheel IMHO. Also, I found that with Indy standards (55mm high) I can go up to 60mm without really needing a riser. 1/8" seems fine for the 63mm and 64mm wheels that I have. My current favorite setup at the moment is a Mini Logo 8.25 deck with Thunder Hollow Light IIs and 55mm Mini Logo AWOL wheels. Thunders are lower. I had to tighten them more initially, but, found that the bushing seemed to harden after about a day of riding and even if I back the kingpin nut to the end of the kingpin, they are still tight enough that wheel bite isn't much of an issue. Independent turn a lot better though. The Thunders seem to help my manuals some. It may just be the fact that they are tighter.
fucking absolutely my new years resolution 20 years + on a skateboard im buying ceramics and going straight for round rails lol.
and I want those vans pro models in the background too! lol.
holyshit its jeron! skate more part was one of my favss
8.5 is the norm. I'm on a 9.75 with 10.5 shoes. Tony used to probably ride 9.75 in the Animal Chin days. I wonder...will 9.75 eventually be the "new norm"? 🤔
Yes...I think so bro,love wide boards,I'm 10.5 as well.
"Have you seen him"?.......I found him several times....Peace
@@timothyphillips4801 you lucky fucker, been looking for Chin since the 80’s. Always just missed him.
Well if you can convince Nyjah to skate an 8.75 then maybe
Iv had em of over a year sitting in my closet but those AVE FA vans shoes are dope as fu k
I road 8" for the longest tried 8.25" for a few months and went back to riding 8"
Try 8.5 or 8.75 with 169s......if y'all can flip dat,go back to your 8 and triple kick/heels are yours for days....thank me later.
@@timothyphillips4801 I can already triple flip most of the time triple heel nah not yet maybe double heel
@@jessereddragon7617 awesome!
@@jessereddragon7617 got footy of a triple flip?
@@Coleman_H negative on that
no mention of wheelbase. would be interesting to know considering his height
Do a flat ground trick and give it to them 😂😂😂😂 genius 😉
Ahahah that stump board comment Jeron made
No switch flip switch Manny in background. Come on Chris :(
word.
react to at least one part from genesis 2
If anybody deserves a set of ceramics a month it's Tony Hawk lol
noway! tony talks!
Does he ride 83B wheels (his Bones model) on Skatelite?
No he use 84b 104a SPF
I’m so glad that Tony doesn’t know what you call certain tricks.
In the 80s every trick had a name! Madonna , stalefish ect. Need to bring that back. I just learned grapefruit grinds the other day! I was stoked!
Totally click-baited me here. The gear fallacy (If I only have what my hero uses, then maybe...) is so tempting. But Tony's amazing as a human being and not just a skater, and he's pretty damn tall so, how DOES he do it?
Maybe.. but he doesn't give specific wheel and deck models for instance. And I'm with you.. How DOES he do it?!!
@@danwatkins6303 It's the ceramic bearings. Definitely the bearings.
@@carlosreira2189 Aww.. perhaps you got something there..
@@danwatkins6303 Ah Lol. I'm saving up for some right now!
Is that the deck that the wee kid send tony via the random postman?
0:25 whats the name of the deck on the right?
It's one of Neckface's baker boards, that one's a Riley Hawk pro model
Waiting for the truck’s size
I would guess whatever fits a 8.5" deck
@@SONOFABITCH 149
But my point is they always ask about setups and often forget about some parts.. come on, it’s deck, trucks, wheels and bushing at the end of the day
@@whopwhop6732 149
He rides 149s Indys i think i seen him say it in some other video
He rides 149. Check out his “My Indy’s” video. He explains it.
Can't believe Tony doesn't know what a varial flip is smh
He knows what they are. He’s making a joke because he’s old school and calls them heel flip shove or kick flip shove. He’s been on before arguing why we shouldn’t call them varial flips.
I mean, he WAS the first guy to DO a varial. He literally invented the word itself. Seems weird that other people re-named the trick years afterwards. Take away the heelflip part of a 'varial heel' and what do you call it? A varial? Nope, you'd call it a front pop shuv. Why does adding a heelflip turn it into a varial?
@@nathanhand9394 😂😂😂😂 Do you guys even watch the 9 club? It has always been a joke to mess with Tony about varials🤣 Go watch some older episodes lol
@@SONOFABITCH 😂😂😂😂 Do you guys even watch the 9 club? It has always been a joke to mess with Tony about varials🤣 Go watch some older episodes lol
@@stennsonn Did you even read my reply? That’s literally what I’m explaining to the other dude.
Bronson ceramics 70$
I’m impressed. A bunch of skaters having a coherent conversation
Happens a lot actually. Ehehehehheh
@@codykoplin5337 ha I don’t even remember writing that comment. Must of been ina bitchy mindset 🤦♂️
No worries. You have a great day!
What does the green button do ?
So sick
Isn't a heelflip front shuv a varial heelflip?? Cause I always thought a heelflip regular shuv was an inward heel but now I'm confused
xXTOVAR BALL420Xx You’re right. Try not to think too hard about it. It’s so easy to get skate terminology mixed up. Tony said the body turned frontside too, so I *think* he might have been talking about a fs big heel. I’d have to see the clip.
Thats w@ht I thought too. I think your right!
Varial is a vert term, which means using your hand to spin the board, not your feet. Really a varial heel should be a heelflip shuvit, and varial flip should be a kickflip shuvit, but using varial for flat ground is what people have gotten used to, even though it’s technically wrong.
Varial is just a term for the rotation the board is making much like when someone is doing a body varial and only the body turns 180 degrees its the same concept with varial heel or varial kickflip because the board turns 180 degrees with a flipping motion added so nobody's wrong for saying what the actual trick is called 😂😂😂😂😂 but nice try trying to sound smart
@@BlaxicanGuy dude varial means using your hand to spin the board around, usually on vert, where it was created. Saying varial heel or flip on flatground when you’re just using your feet and not your hand is wrong. It’s just become mainstream to say varial heel and varial flip, even though they aren’t technically accurate. Not trying to sound smart, I’m just saying facts about trick names lol
Please stop milking this interview.
Really Bones? Really Powell? It's Tony Hawk and It's for charity! Cheapasses - I'm glad I'm riding Spitfire and Indy-5's bearings
David Lee Ashkenazi I mean, they’re not cheap bearings. I can kind of understand.
vert skaters are so boring lol
Congrats. You own a skateboard. You might be good. But...you are not a skateboarder.
@@0shitferbrains0 You don't have to be nice. There's no way this clown's any good on a board.
@@0shitferbrains0 lets influence mind scape the comments section using the highlighted reply function, if you have the comments section for free speech but then use it for manipulation with your highlighted reply function, that just shows that you do not respect your skateboarder audience or community and when you say skaters supporting skaters its really just your club of sellouts supporting only your club of sell outs, that is most clear whe you want a bias comment section cause lets face it, nine club does not care about its audience's opinions, it must be a copy paste or it gets attacked. brainscaper wannabes, scape this middle finger in your face, I know someone in hollywood, I know about you slime buckets, its money over skate shops and culture till all skaters speak up everyday, its on the rise, smug face.
@@0shitferbrains0 Congrats. You own a scooter. You might be good. But...you are not a skateboarder. you need to own one and skate good for that. I would add progressively and for life, you are most definitely not a skater, poser, go watch boring cable TV, look, your idol's on some irrelevant TV show, you pizza faced virgen.
@@seymourglass26 "derp dee dur, she not share same opinion, she must be non-skater or not have skills, derp dee dur" LOL absolutely no way someone has a different opinion, not on this edited brainscaped comment section LOL you guys are pathetic and obviously sexist. So many women skaters, how many have you had on the show? sponsored? LOL they had a fashion squad though... skate culture needs a make over but its not gonna be by sell outs hurting skate shops, big corporations and influencers for rent with a manipulated comment section, obviously not supporters of a free society or free speech, weren't you arrested in the capitol today, loser.
My set up too