Lock Connection, LLC -- KR-S80LC-A and KR-S80LC-E and KR-S61LC - Programming locks.

Поделиться
HTML-код
  • Опубликовано: 19 окт 2024
  • Lock Connection LLS locks come pre-programmed, but here are instructions to reprogram if needed. Visit us at www.lockconnection.net
    Our locks are not the same that tactical traps use. We have these manufactured to our specification and use a different circuit.
    Link to our KR-S80LC-A RFID Lock
    lockconnection...
    We changed our part# to KR-S80LC in Nov 2019. In 2024, we changed the 3.5 female port on teh side of the lock to a usbC port.
    The KR-S61LC rfid lock programs the same way this lock does.

Комментарии • 27

  • @SmokenSparta520
    @SmokenSparta520 4 года назад +1

    Thank you!

  • @dimitri4964
    @dimitri4964 2 года назад +1

    Right on 👍🏻

  • @dmenace12483
    @dmenace12483 2 года назад +2

    How can you reset a manager card if the reset button is pushed?

    • @lockconnection3731
      @lockconnection3731  2 года назад +1

      after resetting the lock, push the #1 button, it will start to flash, touch a card to the lock, it will beep 1 time, then pull it away. wait 5 seconds so the lock can reset. That card is now programmed as the manager card.

    • @dmenace12483
      @dmenace12483 2 года назад +1

      Thank you!

  • @jnrcracer
    @jnrcracer 2 года назад

    All I get is red and white flashing lights......What happens if I hit the reset on the light side?

  • @mr.businessman9790
    @mr.businessman9790 Год назад

    How do you get locking pin back in if it came out?

    • @lockconnection3731
      @lockconnection3731  Год назад

      you mean the striker pin? If the locking striker pin came off, then I assume the C clip broke on it. Thats what holds the locking pin onto the striker. Probably need to order a new striker. I assume you have striker A -- Part # is "KR-S80 Strike A"

  • @MattCA88
    @MattCA88 2 года назад

    What happens if you long hold reset? I was having problems and did a long hold, can't seem to program anything.

    • @lockconnection3731
      @lockconnection3731  2 года назад +1

      It reset the lock back to factory settings. Nothing is programmed. You will have to set the mode you want, re program the manager card, then program the usercards.

    • @MattCA88
      @MattCA88 2 года назад

      @@lockconnection3731 I believe I got it to program a manager card. When I swipe the manage card it seems to program a user card but when I try to use the user card it blinks red/white. Any ideas? Thanks for your help!

    • @MattCA88
      @MattCA88 2 года назад

      @@lockconnection3731 For some reason my batteries all went from 1.5V to 0.65V pretty quickly. Expiration of 12/2030 so don't know if they are bad batteries or the unit is draining them quickly, but I got it to work for now.

    • @lockconnection3731
      @lockconnection3731  2 года назад

      @@MattCA88 They should last at least 6 to 7 months with a few times a day use. If you have the emergency open alarm on and it goes off several times, that does run batteries down pretty fast. Make to use name brand alkaline batteries or even Lithium max energizers that are disposable.

    • @rblbatb
      @rblbatb 2 месяца назад

      Answered my question in less than 30 seconds. God bless you!

  • @jareds839
    @jareds839 Год назад

    What if I misplaced my manager and user cards how can I program it to a new rfid card?

    • @lockconnection3731
      @lockconnection3731  Год назад

      you will have to get new cards and program to the lock. you will have to have access to atleast the #1 button on the back of the lock

    • @jareds839
      @jareds839 Год назад

      @@lockconnection3731 I have access to all 4 buttons. Can I use any rfid card to program, or possibly use my phone or something?

    • @lockconnection3731
      @lockconnection3731  Год назад

      @@jareds839 not all, but most likely if you get 13.56Mhz frequency cards, they will work. for sure ours do. here is the link. lockconnection.net/rfid-card-for-13-56-mhz-rfid-locks/

    • @MichaelLonville
      @MichaelLonville Год назад

      @lockconnection3731 How many user cards can this lock handle? I need a lock that can support 15-20 user cards. Thanks

  • @jacobweibel2912
    @jacobweibel2912 4 года назад

    I recently purchased a home and found one of these in a bedroom. I took the shelf apart and found this unit in the shelf. I don't have any of the cards. is there a place where i can purchase a manager and access cards?

    • @lockconnection3731
      @lockconnection3731  4 года назад

      Hi Jacob, as long as you have access to the buttons on the lock you can create a new manager card and then set new user cards using that new manager card. You can order the cards here: lockconnection.net/rfid-card-for-13-56-mhz-rfid-locks/.

    • @jacobweibel2912
      @jacobweibel2912 4 года назад

      @@lockconnection3731 perfect! thank you! does that link go to the manager card or the user card? or can those cards be used for both?

    • @lockconnection3731
      @lockconnection3731  4 года назад +1

      @@jacobweibel2912 Any card be used as both. If you order 3, I will send ones already labeled manager card and user card for you

    • @jacobweibel2912
      @jacobweibel2912 4 года назад

      @@lockconnection3731 sounds great, ordered! Thank you for the help!

    • @lockconnection3731
      @lockconnection3731  3 месяца назад

      RFID cards can be made into either a manager card or user card. Its created at the lock level.

  • @garykeenan9344
    @garykeenan9344 2 года назад

    I have a tactical shelf and I put batteries in it and I I locked it and I want to use my user cards and it just goes beep beep beep beep beep beep what do I do