MAKING PARTIAL DENTURE WITHOUT CLASPS- ALL STEPS AND INSERTION 4K

Поделиться
HTML-код
  • Опубликовано: 19 май 2022
  • In this video i am making a partial denture without clasps aka flipper. the most important thing when making this type of partials is that everything must accurate from impression to designing to waxing and also using some of the friendly undercuts to gain good retention.
    enjoy watching and please consider supporting this channel by subscribing and aharing the channel for more videos.
    --------------------------------------------------
    في هذا الفديو راح اوضحلكم شلون اسوي البارشال بدون ضامات او كلاسبات. اهم شي يجب الانتباه له في صنع هذا النوع من البارشال هوه او يكون كل شي وكل خطوة بمنتهى الدقة إبتداءً من الطبعة الى التصميم الى التشميع والي استخدامات الاندركت البسيطة للحصول عل الثبات. النتيجة كانت رائعة جدا. اتمنى تستفادون من الفديو.
    نرجوا دعمكم للقناة بمشاركة الفديو والاشتراك في القناة للمزيد من الفديوات
  • НаукаНаука

Комментарии • 285

  • @marymaryquitecontrary
    @marymaryquitecontrary 11 месяцев назад +10

    Thanks!

    • @WAXBAE
      @WAXBAE  11 месяцев назад +2

      Thank you so much! I appreciate it!

  • @WAXBAE
    @WAXBAE  2 года назад +12

    Thank you all for joining! If you have a question leave it in the comment section and I’ll get back to you ASAP. Please consider supporting this channel but subscribing

    • @leejones3155
      @leejones3155 2 года назад

      Question for waxbae or anyone who might have a solution. We are getting a thin acrylic film on the teeth during process. Any ideas on what's causing this and how we can fix this problem? We are using the packing method

  • @jbm5767
    @jbm5767 Месяц назад +4

    I never knew there were so many stages to the process! Fascinating video, a craftsman at work! Wow.😁👌

    • @WAXBAE
      @WAXBAE  Месяц назад

      Thanks for watching

  • @snipe2nite
    @snipe2nite Год назад +6

    Now that's how its done the right way!

    • @WAXBAE
      @WAXBAE  Год назад

      I appreciate it!

  • @Melanie-ix4nq
    @Melanie-ix4nq 8 месяцев назад +8

    This was very interesting to watch, a lot of steps to making a partial.

    • @WAXBAE
      @WAXBAE  8 месяцев назад +1

      It’s sure is. Thank you for watching

  • @Patricia-ic4ee
    @Patricia-ic4ee Год назад +12

    Wow those are just like the ones I have, having lost my two front teeth as a child I have got that same dentures, they’re just great without wires, thanks for showing how they are made .❤

    • @WAXBAE
      @WAXBAE  Год назад +2

      Thank you for watching. I appreciate it

    • @itumelengmokwena5948
      @itumelengmokwena5948 7 месяцев назад +1

      As i may ask can you talk properly or eat with them😢

  • @bertadarias990
    @bertadarias990 8 месяцев назад +1

    WOW AMAZING I HAD THESE KIND OF PARTIALS DONE 23 YEARS AGO ON A VISIT TO CUBA AM SO GLAD THESE PATIALS ARE DONE ON THE US AS WELL THANKS
    I'VE ASKED MY DENTIST IN MIAMI FL. IF THEY CAN DO ONE LIKE THE ONE I BROUGHT FROM CUBA CAUSE IT JUST HAPPEN THAT MY DOG DESTROIDED THE ONE I BROUGHT FROM CUBA BUT SHE SAID NO 😔

  • @72wick
    @72wick 2 месяца назад +2

    Just if I could afford them. Amazing watching the process.

    • @WAXBAE
      @WAXBAE  2 месяца назад

      Thank you for watching and best of luck

  • @ptsolyndra5323
    @ptsolyndra5323 9 месяцев назад +4

    Quality art work, remind me of my work for semiconductor in Silicon Valley.

    • @WAXBAE
      @WAXBAE  9 месяцев назад

      Thank you for watching! I appreciate it

  • @ranulfo6895
    @ranulfo6895 Год назад +4

    Um verdadeira obra de arte parabéns 😮

    • @WAXBAE
      @WAXBAE  Год назад

      Thank you! I appreciate it 🌹

  • @johnwhauwhau9937
    @johnwhauwhau9937 7 месяцев назад +5

    I'm going in couple of weeks to have 3 front teeth checked. First timer, after doing nothing for 10+ years, this looks ideal. I also need a couple on the side which I had no intention of doing, but after watching this, i may consider, if it's done like this. I will show my dentist this, curious to see what he'll say. From New Zealand.

    • @WAXBAE
      @WAXBAE  7 месяцев назад +1

      Let me know what they think. Best of luck

    • @johnwhauwhau9937
      @johnwhauwhau9937 7 месяцев назад

      Yeah, I will. My appointments, on the 30/11/23, and by the way, a really, nice job too.

  • @paulettesondervorst5967
    @paulettesondervorst5967 Год назад +2

    Thank you for this video and the amazing work you did, you are a sweetheart I would like to help people in need ,😊

    • @WAXBAE
      @WAXBAE  Год назад +1

      Thank you so much for the kind words, much appreciated!

  • @robertverrege8202
    @robertverrege8202 7 месяцев назад +3

    All I can say is, wow excellent work . Now I just have to come up with the dinero.

    • @WAXBAE
      @WAXBAE  7 месяцев назад

      I appreciate it! Thank you for watching

  • @brandylovewhisky6355
    @brandylovewhisky6355 Год назад +4

    Amazing brilliant job well done 👍

    • @WAXBAE
      @WAXBAE  Год назад +1

      Thank you for watching 😄

  • @hailmousa9431
    @hailmousa9431 Год назад +2

    فنان اكثر من رائع شو هاد يعني ابدعت ياباشا

    • @WAXBAE
      @WAXBAE  Год назад +1

      شكرا الك عل المشاهدة

  • @richardarrow369
    @richardarrow369 8 месяцев назад +1

    Wow! Amazing work! Very talented.

    • @WAXBAE
      @WAXBAE  8 месяцев назад

      Thank you for watching 😊

  • @nesiotv8395
    @nesiotv8395 2 года назад +1

    simply the best 🤟🙌

    • @WAXBAE
      @WAXBAE  2 года назад

      Thank you for watching I appreciate it

  • @tasnimtasnim6621
    @tasnimtasnim6621 2 года назад +3

    عمل رائع شكرا جزيلا أخي

    • @WAXBAE
      @WAXBAE  2 года назад +1

      شكرًا على المشاهدة

  • @gurvindersinghbawasran3336
    @gurvindersinghbawasran3336 11 месяцев назад +1

    Wah ji wah very nice 👍

    • @WAXBAE
      @WAXBAE  11 месяцев назад

      Thanks for watching

  • @ayadalnjem6070
    @ayadalnjem6070 2 года назад

    مبدع 🤩😍

    • @WAXBAE
      @WAXBAE  2 года назад

      شكرًا ☺️

  • @MRMChannelMalau
    @MRMChannelMalau 2 месяца назад +1

    Amazing work

    • @WAXBAE
      @WAXBAE  2 месяца назад

      Thank you! I appreciate it

  • @mahmoudmouawia1649
    @mahmoudmouawia1649 2 года назад +2

    Great work.

    • @WAXBAE
      @WAXBAE  2 года назад +1

      Thank you

  • @viewswatch1230
    @viewswatch1230 8 месяцев назад +2

    Wow! I'm so impressed how they do that... So much effort and it's really done well... Good job!!! 👍😊

    • @WAXBAE
      @WAXBAE  8 месяцев назад

      Thank you so much for watching! I appreciate it

    • @user-pz9iu9de9h
      @user-pz9iu9de9h 8 месяцев назад

      活动义齿我做了21年了

  • @dzirisenior
    @dzirisenior 9 месяцев назад +1

    you are an artist

    • @WAXBAE
      @WAXBAE  9 месяцев назад

      Thank you 😊

  • @dusan2595
    @dusan2595 4 месяца назад +2

    nice

  • @leejones3155
    @leejones3155 2 года назад +7

    And very good work by the way! I've learned some very helpful techniques from you!

    • @WAXBAE
      @WAXBAE  2 года назад

      Thank you for watching, I did answer you on the live video but I’m not sure if you’ll be able to see it after the video ended.

    • @leejones3155
      @leejones3155 2 года назад

      @@WAXBAE I didn't see it. Can you help!

  • @marega9802
    @marega9802 2 года назад +2

    EXCELENTE TRABAJO MAS QUE NÍTIDO SALUDOS DESDE ECUADOR

    • @WAXBAE
      @WAXBAE  2 года назад +2

      Gracias ☺️

  • @user_ruquaya-23
    @user_ruquaya-23 Год назад +1

    عاشت ايدك 🤲♥️

    • @WAXBAE
      @WAXBAE  Год назад +1

      شكرا ☺️

  • @doctornida2345
    @doctornida2345 2 года назад +2

    Thank you

    • @WAXBAE
      @WAXBAE  2 года назад +1

      You’re welcome

  • @andreawan7446
    @andreawan7446 Год назад

    Saya akan mendukung trus vidio mu

  • @violette1944
    @violette1944 3 месяца назад +1

    Bravo, excellent travail. 👏👍⭐⭐⭐⭐

    • @WAXBAE
      @WAXBAE  3 месяца назад

      Thank you for watching! 😁

  • @channeloffun1
    @channeloffun1 2 года назад +1

    Top man as always)))

    • @WAXBAE
      @WAXBAE  2 года назад

      Thank you I appreciate it

  • @ShelovesJesusandElvis
    @ShelovesJesusandElvis 2 месяца назад +1

    Amazing work!!!

    • @WAXBAE
      @WAXBAE  2 месяца назад

      Thanks!

  • @jaspalsingh6986
    @jaspalsingh6986 2 года назад

    Great work

    • @WAXBAE
      @WAXBAE  2 года назад

      Thank you 😊

  • @josephbrown7319
    @josephbrown7319 11 месяцев назад +1

    Awesome!

    • @WAXBAE
      @WAXBAE  11 месяцев назад

      Thanks for watching

  • @mrtwisster4225
    @mrtwisster4225 2 года назад +1

    Wow, Great work)))

    • @WAXBAE
      @WAXBAE  2 года назад

      Thank you 😊

  • @davidbutler8096
    @davidbutler8096 11 месяцев назад +5

    You are an artist.
    Amazing work.

    • @WAXBAE
      @WAXBAE  11 месяцев назад

      Thank you sir! I appreciate it

  • @robsonprotetico1124
    @robsonprotetico1124 7 месяцев назад +1

    Belo trabalho. Parabéns. Abraços do Brasil.

    • @WAXBAE
      @WAXBAE  7 месяцев назад

      Tha is for watching

  • @user-xz2qk4by6z
    @user-xz2qk4by6z 2 года назад +1

    Отличная работа коллега!

  • @didier6548
    @didier6548 4 месяца назад +1

    Travail d artiste 🧑‍🎨👌

    • @WAXBAE
      @WAXBAE  4 месяца назад

      Thank you for watching

  • @xijinping.001
    @xijinping.001 7 месяцев назад +2

    Excellent videos!
    You would be the best dentist I am sure of it !
    Do you have a video where you explain what kind of partial dentures do you have and in which scenario is one suggested?

    • @WAXBAE
      @WAXBAE  7 месяцев назад +1

      Thank you so much! I’m a dental technician not a dentist but I appreciate it.
      I have few videos of making claspless partial maybe they worth having a look

  • @paigeme886
    @paigeme886 Год назад +3

    Absolutely amazing! Thank you so incredibly much!
    This may sound odd but do you know if the Ivoclar ivobase dentures / denture material is gluten free?

    • @WAXBAE
      @WAXBAE  Год назад +1

      Thank you! That’s not an odd question at all, traces of Gluten can be found in some MMA (methyl methacrylate) dental products and it’s the same material that some manufacturers use to fabricate acrylic teeth and base material now whether the type of teeth or material we use has or not I’m no so sure about that.

    • @paigeme886
      @paigeme886 Год назад +1

      @@WAXBAE wow! Thank you so incredibly much! How did you find this out? Google search?

  • @khalilkhalifa1853
    @khalilkhalifa1853 Год назад

    Excellent❤

  • @zhornour9326
    @zhornour9326 8 месяцев назад +2

    Bravo bon travail👍🌹

    • @WAXBAE
      @WAXBAE  8 месяцев назад

      Thank you for watching

  • @user-sd7oq3bj6b
    @user-sd7oq3bj6b Год назад +1

    Rapaz num.pedasinho de Se o cara paga carro em.kkk r tá doido .pensei que era mais difícil.com mais tecnologia. Nas ficou bom.
    Valeu😊

    • @WAXBAE
      @WAXBAE  Год назад

      Thanks for watching

  • @yafetzemmedhun7161
    @yafetzemmedhun7161 2 года назад +4

    Thank you for this excellent video!!! I enjoyed watching the step by step process of making it. I wanted to ask you what you're relying on for retention when it comes to RPDs without a clasp? I recently made an acrylic only RPD (no cast metal frame) with 2 wrought wire clasps for my patient in dental school and the retention was okay but not the greatest!

    • @yafetzemmedhun7161
      @yafetzemmedhun7161 2 года назад

      Nvm lol I just read your reply to another comment about the retention after writing this :)

    • @WAXBAE
      @WAXBAE  2 года назад +2

      Lol thank you for watching 😃

  • @damodarmahanta9608
    @damodarmahanta9608 10 месяцев назад +1

    Very nice

    • @WAXBAE
      @WAXBAE  10 месяцев назад

      Thanks for watching

  • @misakiaaoki2173
    @misakiaaoki2173 3 месяца назад +2

    Wow so mush more for important details to denture structure, beautiful work!
    Waxbae where are you located? Can an order be sent to you from USA?

    • @WAXBAE
      @WAXBAE  3 месяца назад

      Thank you! We are located in Canada and it’s quite difficult to work with orders from the US as we obligate to provide the after care for the patients

  • @jaymz0074
    @jaymz0074 Месяц назад +1

    Makes perfect sense now why they are so expensive

    • @WAXBAE
      @WAXBAE  Месяц назад +1

      It’s a lot of steps and stages indeed

  • @silviavillicana5390
    @silviavillicana5390 Год назад +1

    I love your video, I would like, which is the acrilyc mark did you use?

    • @WAXBAE
      @WAXBAE  Год назад +1

      Thanks! It’s Ivocap

  • @cesarcastillo5212
    @cesarcastillo5212 10 месяцев назад +2

    Buen. Trabajo

    • @WAXBAE
      @WAXBAE  10 месяцев назад

      Thank you for watching

  • @Nader2326
    @Nader2326 11 месяцев назад +2

    This is the best teeth , i Like this to learn 😂

    • @WAXBAE
      @WAXBAE  11 месяцев назад

      Thank you for watching

  • @ShelovesJesusandElvis
    @ShelovesJesusandElvis 2 месяца назад

    Where are you located? I’m going to need an upper and lower soon. These look great! Lots of hard work- it’s an art😉

    • @WAXBAE
      @WAXBAE  2 месяца назад

      We are in Canada

  • @eyes21st
    @eyes21st 6 месяцев назад +2

    Thanks

    • @WAXBAE
      @WAXBAE  6 месяцев назад

      Thank you! I appreciate it

  • @seansun9411
    @seansun9411 9 месяцев назад +1

    👍👍👍👍👍

  • @firstpitstop
    @firstpitstop Год назад +3

    Do you have a video of making one without using injection and using acrylic powder and monomer? Nice video btw.

    • @WAXBAE
      @WAXBAE  Год назад +2

      Unfortunately I only use injections methods at the time. Not sure how well it would fit without clasps if processed in the conventional way though. Thanks for watching

  • @linaalnahawi9504
    @linaalnahawi9504 Год назад +1

    ابداع ..سلمت يداك

    • @WAXBAE
      @WAXBAE  Год назад

      شكرا لينا

  • @flavioaurore
    @flavioaurore Год назад +2

    Preciso muito de usar uma dessa mas por enquanto não tenho condições...

    • @WAXBAE
      @WAXBAE  Год назад +1

      Best of luck

  • @nosaali7589
    @nosaali7589 10 месяцев назад +1

    ماشالله عليك ، لوسمحت نوع المشين و اسم طريقه حق وضع الاكريلك

    • @WAXBAE
      @WAXBAE  10 месяцев назад

      اسمها Ivocap. شكرا عل المشاهدة

  • @hassanahmat446
    @hassanahmat446 Год назад +2

    فيه عيادة ممتازة و استفاد منها الكثير من الناس اتمنى الشفاء العاجل للجميع

  • @DianaLopez-fz5el
    @DianaLopez-fz5el 2 года назад +3

    Great work, thank you for sharing the technique of the silicone. I have a question, how does it hold without clasp? Is the material semi flexible or plain acrylic. ? Thank you. Love your work.

    • @WAXBAE
      @WAXBAE  2 года назад +2

      It’s hard acrylic, in the description I mentioned what’s important for retention

    • @DianaLopez-fz5el
      @DianaLopez-fz5el 2 года назад +1

      Thank you got it

    • @Patricia-ic4ee
      @Patricia-ic4ee 11 месяцев назад +1

      They don’t need wire if fitted correctly,

    • @karensayer3089
      @karensayer3089 7 месяцев назад

      Suction. Very strong .Take some getting plate out.
      I had similar but not front teeth.Plate with 4 teeth added .

  • @heidyrondon3291
    @heidyrondon3291 11 месяцев назад +1

    🕺❤❤❤❤❤

  • @hugoarguelles5468
    @hugoarguelles5468 10 месяцев назад +1

    hola que aparatos usas para inyectar el acrilico y la marca del acrilico m gracias estupendo video

    • @WAXBAE
      @WAXBAE  10 месяцев назад

      It’s called Ivocap by ivoclar. Thank you for watching

    • @hugoarguelles5468
      @hugoarguelles5468 10 месяцев назад

      @@WAXBAE MUCHAS GRACIAS ,SALUDOS DESDE MEXICO

  • @estherwangombe
    @estherwangombe 10 месяцев назад

    Thats is good work,can ireturn my one month denture which is allergic

    • @WAXBAE
      @WAXBAE  10 месяцев назад

      I think you have to contact the place where you made them and have that discussion with them. Best of luck

  • @redwood2811
    @redwood2811 2 года назад +8

    It might be helpful for a lot of your viewers if you would make some videos about repairs, add-ons, relines and wire bending

    • @WAXBAE
      @WAXBAE  2 года назад +1

      I do have one repair video but you are right I need to do more hopefully next video

    • @redwood2811
      @redwood2811 2 года назад +2

      @@WAXBAE you know, “re-attach 7, add 14, w/w clasp 15, reline, by 4:00” Something like that.

  • @user-bv7pg3yp7e
    @user-bv7pg3yp7e 2 года назад +1

    عمل رائع . كيف وصلت الى هذه المرحلة من الابداع في عملك وما النصيحة التي تقدمها لطالب مثلي😅😁

    • @WAXBAE
      @WAXBAE  2 года назад +4

      ١٣ سنة من العمل وقبل الجامعة كنت اشتغلها ايضا.
      النصيحة هي كثرة العمل والدراسة

    • @user-bv7pg3yp7e
      @user-bv7pg3yp7e 2 года назад +1

      @@WAXBAE شكرا جزيلا
      +كثير فرحت من شفت لهجتك عراقي… فخورين بيك

  • @dominics7515
    @dominics7515 2 года назад +2

    Thank you for the video!
    What is the injection material? Can I have the brand name?

  • @riazcheema9086
    @riazcheema9086 9 месяцев назад +1

    Same as I do.

    • @WAXBAE
      @WAXBAE  9 месяцев назад

      🙌🏼

  • @utahboxergirl11
    @utahboxergirl11 Месяц назад +1

    Can you do this with molars on each side for the bottom? The rest of the bottom teeth are great❤

    • @WAXBAE
      @WAXBAE  Месяц назад

      Yes but after evaluating the health of natural teeth and see if a claspless flipper would work. Each person is different

  • @nonenone4219
    @nonenone4219 4 месяца назад +1

    Can you make the nylon ultra thin without all that plastic covering the roof of your mouth?? You can't taste or talk well with it, impending the roof of the mouth so much.

    • @WAXBAE
      @WAXBAE  4 месяца назад

      Hard to judge just by talking. Every case is different

  • @energiavital1607
    @energiavital1607 8 месяцев назад

    How retentive are they when patient eats with it? Do they need to use a lot pf poligrip? Thank you.

    • @WAXBAE
      @WAXBAE  8 месяцев назад

      Most of the cases they are pretty retentive but every person is different because retention depends on many factors

  • @kashaneka
    @kashaneka 11 месяцев назад +1

    Are porcalain teeth more expensive as apposed to acylic teeth. I didn't like the way acrylic teeth did not discolour when I drank red wine. Can you have partials made with porcelain teeth?

    • @WAXBAE
      @WAXBAE  11 месяцев назад +1

      I doubt that many places still use the porcelain teeth for dentures and especially partials. Best of luck

  • @pankajmakwana2300
    @pankajmakwana2300 11 месяцев назад +1

    Thank you. Is there a way you can do a few teeth for bottom jaw? Where abouts are you located please and how can i get in touch?

  • @angelwitchywildingrocco
    @angelwitchywildingrocco 8 месяцев назад +1

    I have upper partial dentures with no metal fittings....they don't do them in the uk but it also won't hold by itself without adhesive i lost most of my back teeth and a front side tooth😖😖

    • @angelwitchywildingrocco
      @angelwitchywildingrocco 8 месяцев назад +1

      I guess its different depending on what country you live in etc though....

  • @lahsenakil2154
    @lahsenakil2154 8 месяцев назад +1

    I am wondering if you can build a lower jaw

    • @WAXBAE
      @WAXBAE  8 месяцев назад

      Ofcourse

  • @ali-esawi8699
    @ali-esawi8699 2 года назад

    اكدر اسوي طقم جزئي من برايمري امبرشن فقط؟ لو الا فاينل امبرشن كاست

    • @WAXBAE
      @WAXBAE  2 года назад +1

      الحجي بيني وبينك كل شغلنا عل الطبعة البرايمري 😂 يعني اكيد لازم تكون مظبوطه ونظيفة

  • @user-dr7tt5zx4e
    @user-dr7tt5zx4e 5 месяцев назад

    😮 wow . Do you make them for other like this

    • @WAXBAE
      @WAXBAE  5 месяцев назад

      Every single person ofc

  • @2ktomsrp2k14
    @2ktomsrp2k14 Месяц назад

    Could you possibly help me make a partial for my front teeth ,I need the wax I have everything else ,I tried thermal beads but need some to hold it in mouth , I can't see dentist til august

    • @WAXBAE
      @WAXBAE  Месяц назад

      Unfortunately we can’t do it that way. Best of luck

  • @DoJo1965
    @DoJo1965 2 месяца назад

    any links to source materials? I would love to try this as an artist it would come in handy.

    • @WAXBAE
      @WAXBAE  Месяц назад

      Some of the materials are only sold to professionals but you can try online

  • @shintachan1098
    @shintachan1098 4 месяца назад

    I have question,if the gum been trimmed little to much so it cause has gap between my real teeth and denture can that be fixed?
    Thank you in advance

    • @WAXBAE
      @WAXBAE  4 месяца назад

      Yes you could fill it later with cold cure acrylic but it may not look as defined as the initial carving

  • @amalali9304
    @amalali9304 Год назад

    ممكن نركب جسر متحرك عند فني أسنان.....بدون زيارة دكتور أسنان؟؟؟شكراً.

    • @WAXBAE
      @WAXBAE  Год назад

      حسب قوانين البلد احيانا ممكن واحيانا لا

  • @ShelovesJesusandElvis
    @ShelovesJesusandElvis 2 месяца назад

    It’s SOOOO IMPORTANT to get the BITE CORRECT! I have chronic TMD and a millimeter off can send me many headaches!
    I just went to see a dentist today for my concerns and he said a “ flipper” could be made but for temporary. This is the final product ISNT it?!

    • @WAXBAE
      @WAXBAE  2 месяца назад

      You’ll have to ask your dentist about that

  • @veronicamorales9204
    @veronicamorales9204 10 месяцев назад

    So where do we get the custom mouth mold to make the flipper?

    • @WAXBAE
      @WAXBAE  10 месяцев назад

      It’s either sent by the dentist or we take impressions when the patient visits. Thanks for watching

  • @shadelight5706
    @shadelight5706 Год назад +2

    I got the one with the clamps I hate it don’t like the way how it sit in my mouth need the real 1 crown inserted they think $1500 can just fall out the sky land to them it’s not easy when needing dental work done

    • @WAXBAE
      @WAXBAE  Год назад

      Sorry to hear about your experience. Where did you get that work done?

    • @estherwangombe
      @estherwangombe 10 месяцев назад

      ​@@WAXBAE,ihate mine coz is even allergic can ireturn it for another one

  • @bellsibub9951
    @bellsibub9951 11 месяцев назад

    What tool do you use to smooth the denture down please?

    • @WAXBAE
      @WAXBAE  11 месяцев назад +1

      For the wax stage I use flames and for the acrylic I used pumice compound

  • @blackknight2695
    @blackknight2695 3 месяца назад

    what is the cost for a partial you made in this video

  • @sofiaida4578
    @sofiaida4578 Год назад +2

    عملت طقم اسطناعي لاسناني العلويه الاربعه وعندي صعوبه بتأقلم معه أحس ان هنا ك شيء داخل فمي لا أستطيع تكلم براحه ولا الأكل بماذا تنصحني🥺

    • @user-jb1qk1me9l
      @user-jb1qk1me9l Год назад +3

      ربما مع الوقت تتأقلمين

    • @WAXBAE
      @WAXBAE  Год назад +2

      التأقلم يحتاج الى وقت

    • @sofiaida4578
      @sofiaida4578 Год назад +1

      شكرا لكم على النصيحه انشاءالله يارب نوالفه

    • @sofiaida4578
      @sofiaida4578 Год назад +1

      @@WAXBAE ونقظر نمضغ عليه ميصراله والو نخاف لايتكسر ولا يطيح

    • @suesmith3744
      @suesmith3744 10 месяцев назад

      Perseverance , you WILL adapt …

  • @billdaniels7815
    @billdaniels7815 12 дней назад

    How much does this cost with 4 teeth added ?

  • @AgustinaQuinteroFelix
    @AgustinaQuinteroFelix 8 месяцев назад

    Hi there. what the name of the liquid you used before you trim it.

    • @WAXBAE
      @WAXBAE  8 месяцев назад

      The ultrasonic solution?

  • @hadooalmoswyi9411
    @hadooalmoswyi9411 2 года назад

    ليش اخذنا طبعه للتشو بليتل نكدر بدون نخلي واكس ونسويله ادبتيشن لو شنو الإجراء الاصح

    • @WAXBAE
      @WAXBAE  2 года назад

      شنية هاي تشو بليتل ؟

    • @hadooalmoswyi9411
      @hadooalmoswyi9411 2 года назад

      @@WAXBAE palate الهاه

  • @walkslyricsandmore
    @walkslyricsandmore 9 месяцев назад +1

    Is this flexible denture

    • @WAXBAE
      @WAXBAE  9 месяцев назад

      No it’s hard acrylic

  • @flojomax7933
    @flojomax7933 Месяц назад

    I guarantee they had to file the palette down quite a bit. I’ve worn something similar to that and I couldn’t take it. Had to cut it back a lot.

    • @WAXBAE
      @WAXBAE  29 дней назад +1

      Thanks for watching

  • @eduardopineda1633
    @eduardopineda1633 9 месяцев назад +1

    only one question can you eat safely ?

    • @WAXBAE
      @WAXBAE  8 месяцев назад

      Ofcourse!

  • @aminaben3118
    @aminaben3118 8 месяцев назад +1

    ممكن استشارة طبية دكتور ناجي

    • @WAXBAE
      @WAXBAE  8 месяцев назад

      اسف لا نقدم استشارات طبية بحكم طبيعة العمل كمخبري

  • @jesbardepartment6879
    @jesbardepartment6879 5 месяцев назад

    Shade of natural tooth is different from the pontic

    • @WAXBAE
      @WAXBAE  5 месяцев назад

      Thanks for watching

  • @naimaiherb-ss8op
    @naimaiherb-ss8op 6 месяцев назад

    هل هذا النوع بدون مشابك لا يؤثر على بقية الاسنان
    و ما.مدى تباثه

    • @WAXBAE
      @WAXBAE  6 месяцев назад

      ثابت إذا كانت بقية الأسنان صحية وثابته

    • @naimaiherb-ss8op
      @naimaiherb-ss8op 6 месяцев назад

      @@WAXBAE نعم صحية و تابثة ولكن اريد اعرف هل يؤثر على بقية الاسنان ام لا

  • @yolanda9730
    @yolanda9730 7 месяцев назад

    How do they stay put and down fall down? Thanks

    • @WAXBAE
      @WAXBAE  7 месяцев назад

      By suction, when there is a perfect fit, it stays in place during mastication

    • @yolanda9730
      @yolanda9730 7 месяцев назад

      @@WAXBAE Thank you, are they more expensive that having clasps?

  • @Chris-xb6be
    @Chris-xb6be Год назад +33

    Is there Way to have them with less on the roof of your mouth.

    • @ETAWORLDWIDEMEDIA
      @ETAWORLDWIDEMEDIA Год назад +5

      Fr I’m having the same issue cause I can barely speak at all

    • @rosaliaramirez8052
      @rosaliaramirez8052 11 месяцев назад

      ​@@ETAWORLDWIDEMEDIAUlloa

    • @DokBua0424
      @DokBua0424 11 месяцев назад +1

      Probably flippers

    • @Lili-fs5yr
      @Lili-fs5yr 10 месяцев назад +2

      The part that covers the roof of your mouth is what causes the suction that holds them in, but I’m assuming if they’re made with clasps (while not being great for the teeth they’re clasped to) there would be no need for so much on the roof, but honestly after a while you don’t even notice it!

    • @angelwitchywildingrocco
      @angelwitchywildingrocco 8 месяцев назад +1

      Nail file or dremel drill....

  • @papafall8905
    @papafall8905 9 месяцев назад +1

    ❤❤❤❤❤🇸🇳🇸🇳👍👍

    • @WAXBAE
      @WAXBAE  9 месяцев назад

      Thanks you for watching

  • @user-dr1py6cp6d
    @user-dr1py6cp6d 2 месяца назад +1

    фиксация протеза за счет чего ? no fixihg in the mouth

    • @WAXBAE
      @WAXBAE  2 месяца назад

      Thanks for watching