I love it it's very usefull to get to the store get groceries and travel back. I see many people buying your bike across the USA. Been riding an ebike for 5 years now. The best way to have a ebike buisness is have your own brand.
Nice but some tips from a builder.. Put spacer sleeves between bearings. Use hardened shank bolts for any axle. Use dampers for non suspended pivot loads.
I love, love this and always want to make or buy it myself. But for the poor and non technical among us: the amount of cargo you can carry on a normal city bike with luggage racks back and front is just as much and even larger than with these kind of add-ons or bike trailers or dedicated cargo bikes. On the back carrier rack you hang large side bags (the kind that are used to deliver newspapers), a large crate on top of the rack and also a large crate on the front carrier rack. (I live in the Netherlands where most traditional bikes have standard carrier racks front and back.) I fasten and secure everything with old inner tubes, which are basically giant elastic bands and you can use them for everything. If I need to carry even more stuff I use a hand truck/trolley as bike trailer and an inner tube as trailer hitch tied to my back carrier. It works. It is amazing how much I can transport with this simple set-up. I even used an inner tube to stabilize my front wheel (preventing the wheel to flip to one side when parked and/or is heavily loaded). Transporting long materials like timber or pipes: I use two inner tubes as loops, one attached to the back rack the other either hanging from the handlebar or over my shoulder like a handbag, then hang the load in the loops.
Yes - I also use old inner tubes for outdoor exercise - wrap around street poles - do butterfly-pull upper-arm exercises etc while out jogging/walking/cycling. Use the same ones (different sizes/widths) to secure stuff on rear bike racks. Most EV /ebike/escooter video sites and reviewers seem to hate even talking about the whole subject of luggage and load-carrying. And how often do we have to see idiots ebiking or escooting around with little or big back-packs stupidly weighing on their shoulders and their spines because - hey - racks, baskets, bags etc hanging on or attached to the bike/escooter LOOK SO UN-COOL, right? Paul G
I watched your clip several times, and I couldn't help but find myself being forced to subscribe to your channel. If you gave me more details about connecting the battery, you are amazing. Greetings from Syria.
Excellent job well done very good my young man a ride from nothing but with all your knowledge, you should do a show TV to show the world how do the new technology fro the old one.
Un gusto ver este nivel de ingeniería aplicada. Siempre lo que vende este señor está bien pensado y ejecutado. Un saludo desde la distancia. Éxitos en su vida👋👍🇨🇱
😳 WOW 🤔 This is just the idea I had in mind but with out having the basket hooked on to it!🤨So now you gave me just the right way to go about making a two front wheeler attachment 😉👍.So I can go from two wheels to a three wheeler.😳👏👏👏 Making it your way even takes less metal material and welding to make then all the other RUclips videos I have looked at on here 😉👍.
Q chido c ve eso,q bonito saber arreglar las cosas saludos cordiales sale amigo yo como discapacitado m gustaría tener una así d tres ó cuatro llantas para no caerme...
Лучшее наглядное видео !!!!Спасибо огромное автору Добра, Достатка , Счастья !!!!
Bravo Turkey İzmir selâm 👍 🌹
Welcome!
i heard that there was a good place, be safe bro
I love it it's very usefull to get to the store get groceries and travel back. I see many people buying your bike across the USA. Been riding an ebike for 5 years now. The best way to have a ebike buisness is have your own brand.
Wow...🤔🤔🤔amazing fuulll...
Thank you...
🤝🤝🤝🙏🙏🙏🙏
You are welcome!
Дякую за ідею ! Взяв собі ! Багато переглянув проектів і зупинився на твоєму проекті !
Welcome!
Nice but some tips from a builder..
Put spacer sleeves between bearings.
Use hardened shank bolts for any axle.
Use dampers for non suspended pivot loads.
u r GREAT. God bless you. from ODISA
Thank you so much!
Очень подвижная передняя вилка пару демферов спереди снизу !? Идея огонь ! Молодец ! Спасибо !
My friend that's what I need for my bike to because that's a very good idea 💡 well done my friend god bless brother from anther mother god bless
Hi from Philippines 🤗🤗🤗🤗
👏👏👏
Hello and welcome!
초고수
Yes, bro.
Good video !
Thanks!
@@fawabros 👍👍👍
Good job 👏 👍 my friend well 👍 done very nice.
Thank you!
Excelente moodificcacion muy práctica...saludos
Thank you!
*_congrats you are very perfectionist , your projects are very functional, i like your projects, congrats_*
Thank you!
Make petant and start production. World is awaiting for such awesome products. Very nice.😊😊😊😊😊
The best video Supar Kalakar.
Thanks!
tes œuvres
sont magnifiques
Thank you!
Gracias!! Exelentes videos!!
Muito bom 👍. 🎉👏👏
Thanks!
Very good videos I like your videos❤
Cleverest,, good job 😃😀😀
Thanks!
Nice Work ✅👈
Thanks!
Luar biasa.terima kasih.atas inspirasi nya semoga sukses.
Thank you so much!
I love, love this and always want to make or buy it myself. But for the poor and non technical among us: the amount of cargo you can carry on a normal city bike with luggage racks back and front is just as much and even larger than with these kind of add-ons or bike trailers or dedicated cargo bikes. On the back carrier rack you hang large side bags (the kind that are used to deliver newspapers), a large crate on top of the rack and also a large crate on the front carrier rack. (I live in the Netherlands where most traditional bikes have standard carrier racks front and back.) I fasten and secure everything with old inner tubes, which are basically giant elastic bands and you can use them for everything. If I need to carry even more stuff I use a hand truck/trolley as bike trailer and an inner tube as trailer hitch tied to my back carrier. It works. It is amazing how much I can transport with this simple set-up. I even used an inner tube to stabilize my front wheel (preventing the wheel to flip to one side when parked and/or is heavily loaded). Transporting long materials like timber or pipes: I use two inner tubes as loops, one attached to the back rack the other either hanging from the handlebar or over my shoulder like a handbag, then hang the load in the loops.
Yes - I also use old inner tubes for outdoor exercise - wrap around street poles - do butterfly-pull upper-arm exercises etc while out jogging/walking/cycling. Use the same ones (different sizes/widths) to secure stuff on rear bike racks. Most EV /ebike/escooter video sites and reviewers seem to hate even talking about the whole subject of luggage and load-carrying. And how often do we have to see idiots ebiking or escooting around with little or big back-packs stupidly weighing on their shoulders and their spines because - hey - racks, baskets, bags etc hanging on or attached to the bike/escooter LOOK SO UN-COOL, right?
Paul G
Not bad at all. 👍
Thanks!
Super!😍🤗
Thanks!
you are talent, I want to copy one.
You should make one.
Najzad jedna prakticna i uptrebljiva inovacija!!!
Thank you!
Salute for ur brave mind.
👏👏👌very nice video
Thank you!
Super bro ❤
Thanks!
L'idea è stupenda il lavoro anche , anche come qualcun'altro scrive ci sarebbero alcune cosine da rivedere !!
I watched your clip several times, and I couldn't help but find myself being forced to subscribe to your channel. If you gave me more details about connecting the battery, you are amazing. Greetings from Syria.
An ingenious product. You have to defend the idea and sell it
You and we will all benefit.
Do you want to buy drawing?
Thanks
I really appreciate your work.
I also do drawing for a living
Tuyệt vởi!! siêu phẩm :D
Thanks!
Great Job, wonderfull creativity.
Thank you so much!
This is a perfect tutorial sir.. Thank you for sharing 👍👍👍
You’re welcome!
OMG I LOVE YOU. THANK YOU TOO MUCH.
Thank!
Thanks!
👍👍👍... Beautiful.
Nice ok 😊👍
Very good build
Thanks!
멋져요 💕🇰🇷
Thank Korean friends!
@@fawabros 감사합니다
You are a genius. Great idea
Thank you so much!
Very good design
Thanks!
Bạn làm xe điện rất tốt thật tuyệt vời
Thanks!
This is so AWESOME thank you for this amazing video what a cool bike now!!!
Thank you, too!
@@fawabros Ye keep up the great work 💙
Excellently
Thank you!
@@fawabros💩💩💩💩💩💩💩💩👿👿👿👿👿👿👿💩💩💩💩💩
Absolutely Brilliant Build
Thanks!
You very talented 👏👏👏👏your design is amazing I like it you deserve 5
⭐⭐⭐⭐⭐
Thank you so much!
🤯😲 great concept. It's also a theft deterant with the front wheels being a removable shopping cart.
this is exactly what I wanted to build myself, but haven't the skills nor the tools. great job!
Legal meu caro amigo irmão camarada, muito inspirador suas dicas vão ajudar muitas pessoas mundo a fora, Luziânia Brasil.
Many thanks for your compliments!
@@fawabros сделайте руль по ширине колёс, не будет дёргаться при управлении резко.
Красавчик! Пару идей подсмотрел на будущее,спасибо.
Thank you so much!
Excellent 👍. I gonna copy this for my 110 cc motor bike. And lets see ♥️♥️
Ok bro. Fighting!
Good idea ...♥ brother
Thanks!
that's great video, i like it. i wish you a good career. be safe amazing man!
Muy bueno excelente llama la atención y da ganas de comprarlo.
Thanks for your compliments!
Isso 👏👏👏👏👏👏
Excelente gracias 👌😊
Thank you for not adding background music
Excellent job well done very good my young man a ride from nothing but with all your knowledge, you should do a show TV to show the world how do the new technology fro the old one.
Many thanks for your suggestions!
Un gusto ver este nivel de ingeniería aplicada. Siempre lo que vende este señor está bien pensado y ejecutado.
Un saludo desde la distancia. Éxitos en su vida👋👍🇨🇱
Thank you so much!
Hola, EXCELENTE, eso es CREATIVIDAD.
Thank you so much!
Very good job. Thanks for sharing.
You are welcome!
Muy instable tu bicicleta
Why do you think like that?
Super bro 👌 nd folding also modify
UF!!! ES UNA GENIALIDAD, FELICIDADES, ES LO QUE QUIERO HACER, UNICAMENTE LA PARTE DELANTERA PARA OTRO PROYECTO. ME INTERESA MUUUCHO.
Excelente trabalho 👏👏👏
Thank you!
Thanks for sharing👍👍👍
You are welcome!
Reverse strike bicycle is good ♪
Many thanks for your suggestion. But it’s not easy to built in reverse strike for electric engine and chain.
hands down you're the man you're a genius😀😀
Thanks!
This is SO good, I almost can't stand it! Awesome. I have the bike and the wheels! And I can weld. Gonna make one myself.
top o projeto, parabéns
Thank you!
Параллелограммный мост. Он же только его запросто патентовать может. А в целом - модульный велосипед, отдельное направление.
Thank you!
Хм .. на мой взгляд спорная конструкция ... Но сделано красиво. Молодец!
ну да, особенно привод нужно было гибридным делать, сядет в пути аккумулятор и кати его ))
Thank you!
@@seredaaleksandr7894 тормозов нет, крыльев нет, оси под изгибающей нагрузкой...
Excellent idea with simple design!!! Thumps Up.
Thank you!
Show, excelent.
Thanks!
Wow! 😱👍
Thanks!
Yeaaaah this is exactly what i need. Great Job!
That's pretty neat
Thanks!
Esa bisicleta está buena para andar en Marte 👈 👈👈
Thanks!
Amazing 3 wheeler bike 🚲 awesome 👏 👍
Thank you!
de verdad muy buen video , te felicito
😳 WOW 🤔 This is just the idea I had in mind but with out having the basket hooked on to it!🤨So now you gave me just the right way to go about making a two front wheeler attachment 😉👍.So I can go from two wheels to a three wheeler.😳👏👏👏 Making it your way even takes less metal material and welding to make then all the other RUclips videos I have looked at on here 😉👍.
Excellent repair and design
Thanks for your compliments!
Brilliant . Well done 👍👍
Thanks!
Awesome 👌
Thank you!
cái này làm hết bao nhiu tiền vậy bác, mình cũng cần 1 cái lắp vào xe đạp bánh 26
Muy bonito su juguete excelente lo felicito d💪
Thank you so much!
great work
Thanks!
nice..!!!
Thanks!
Very good job😍😍😍
Thanks!
Superrr nice👍
Thanks!
Q chido c ve eso,q bonito saber arreglar las cosas saludos cordiales sale amigo yo como discapacitado m gustaría tener una así d tres ó cuatro llantas para no caerme...
Nicely done 👍👍👍Thanks for sharing
Welcome!
Los felicito por la grandiosa ingenieria que usan y aplican
Sir from wich country u r u have nice ideas.
Thank you. I come from Timor Leste.
Thank you sir, but i am sorry i don't know where is Timor Leste sir i from Mumbai, India.
Irmão você ganhou mais um inscrito, deixei o like e este comentário , Deus abençoe você toda sua família em nome do senhor salvador Jesus
Thanks!
Gajab invention
Thank you!
Welcome bhai