I been messing around attempting to fix / upgrade ton's of DC 775 and 550 canned motor's for a couple of year's now and what I learned form this guy just in this video is some of the best info on every from tearing down to rebuilding. You saved me a lot of trial and error thanks.
i have good advice just buy the motor on ali-express.... and put it in. but it is amazing he is making all the copper coil-winding again. that is a nice work.
Winding can be done in both sides simultaneously. That would minimize the difference in resistance of each coil and enhance overall performance of the motor. Otherwise your system of winding is very much systematic using number tags on various parts of the rotor.
I have to congratulate you for your skills. I could never do that... I rather spend 10 $ to buy another motor. I use the same motor on my model boats. But again I tip my hat to you!
olha o nível de cuidado que ele tem com as coisas ! Queria um dia chegar nesse nível. O lado ruim da construção do motor foi porcausa da cola, nunca é bom colar qualquer coisa pra melhorar a fixação. Eu tinha um fone de ouvido onde o conector p3 estava apertando os contatos provocando mal contato. Depois de tirar a borracha de vedação e só ter colocado fita isolante por cima , não apertou mais os fios por dentro e não deu mais problema. Meio ruim também do fornecedor não ter feito a quantidade de enrolamentos iguais para as cinco bobinas da armadura, bem óbvio que isso foi resultado de falha humana por conta de ter feito manualmente.
it was awesome content. And Thank you, because that you didn't use any background music. خیلی خوب و کاربردی بود. ممنون که از موسیقی در پس زمینهء کلیپ استفاده نکردی.
04:00 - Great idea adapting the gear extractor, but the central pin could have been just a tiny bit longer. Wouldn't have needed to hit the shat to extract the gear.
Lijadora excéntrica recargable PAEXS 20-Li A1 estás se estropean mucho me duró un año y no la use mucho. Estaría bien que encontraras una y averiguaras los problemas que vienen de fábrica. También la fresadora de 12v un fracaso tuve que reclamar tres veces y sin problema me mandaron la máquina. Pero a todas se les estropea el motor. Y sin hacer mucho esfuerzo. Te escribo esto porque estoy viendo que eres un genio. Un saludo cordial
Thanks for this job . I have seam proplem so sad for my parkside 😔 The copper strips were damaged by the heat and the inner fan melted, and the inner core must be changed .
Dear friend! I really enjoy watching your videos. I believe I've seen them all!! Where is that paradise with all these damaged Parkside? I have a question that you could answer: What if i wanted to make a 12volt dc motor from a cordless drill to work with 18volts? What should I do?
Same motor was in DC battery fan ....i bought identical motor n changed its backplate n armature ....from new motor...I was bit lazy for that much work 🤪🤣🙄
Gros travail, mais moi aussi je l'ai fait .... ce serait à refaire, je changerais le moteur. Il faut être ( comme moi ) en retraite pour se lancer dans ce genre de travail ...
![J.P., NLE Choppa - Bad Bitty (Remix) [Official Music Video]](http://i.ytimg.com/vi/rBDa6BCvw10/mqdefault.jpg)
Thanks for not playing the annoying music like others. Great video!
I been messing around attempting to fix / upgrade ton's of DC 775 and 550 canned motor's for a couple of year's now and what I learned form this guy just in this video is some of the best info on every from tearing down to rebuilding. You saved me a lot of trial and error thanks.
Pppp
Super super super děkuji
i have good advice just buy the motor on ali-express.... and put it in.
but it is amazing he is making all the copper coil-winding again. that is a nice work.
Спасибо за идею!
Очень много двигателей можно не заказывать с китая, а восстанавливать неспеша самим.
Качественная работа!
Beau travail , propre,soigné et nécessitant de bonne connaissance des moteurs DC.
Félicitations!!
Gostei da sua habilidade e paciência para consertar seu equipamento. Parabéns!
Naprawa dla mnie nie opłacalna czasowo . Ale dla zlokalizowania usterki jak najbardziej - idealny film
As usual, an excellent video: professionally made and presented, entertaining and, importantly, informative. Thank you very much.
thank you sir i hope it's helpful for you
Eres un genio me gustan mucho tus herramientas y como las trabajas gracias por compartir tus vídeos que se ve lo disfrutas mucho. Saludos
gracias señor, espero que sea de ayuda para usted
Gran bel lavoro, bravo! Belle immagini esplicative.
Браво! Професионално свършена работа.
благодаря Ви, господине
Probably I’ve to do the same exercise on my Parkside drill!
Thanks a lot for this video!
Отличная работа!! Перемотка двигателя мини-супер!!!
Спасибо, сэр
Sei Forte e Paziente !!! I miei complimenti ! Ciao da Nicola (IT)
Excelente trabajo, pulcro y muy eficiente. Gracias por enseñar!!
gracias Señor
Muy buen y eficaz trabajo, felicidades 👏🏼👏🏼
Awesome. I have learned a lot. Thank you, Sensei.
Thank you sir
Muy Buen Video.
*¡¡¡ BUEN TRABAJO !!!*
Thanks a lot for your very instructive video. It will help many people to repear DC motor.
thank you sir
super, avec nombre de tours des bobines en plus!
Chiaro anzi chiarissimo. Bravo.
Winding can be done in both sides simultaneously. That would minimize the difference in resistance of each coil and enhance overall performance of the motor.
Otherwise your system of winding is very much systematic using number tags on various parts of the rotor.
محتوى مفيد جداً شكراً لك يا صديقي
وجزاك الله خيرا
My friend ,you are really our tools doctor because you returned it back alive.
thank you sir
Wow fenomenale, molto bravo è soprattutto il lavoro fatto a opera d'arte...😁👍
grazie Signore
I have to congratulate you for your skills. I could never do that... I rather spend 10 $ to buy another motor. I use the same motor on my model boats. But again I tip my hat to you!
Greetings!
Congratulations!!
Once again, excellent work!
Thank you sir
olha o nível de cuidado que ele tem com as coisas ! Queria um dia chegar nesse nível. O lado ruim da construção do motor foi porcausa da cola, nunca é bom colar qualquer coisa pra melhorar a fixação. Eu tinha um fone de ouvido onde o conector p3 estava apertando os contatos provocando mal contato. Depois de tirar a borracha de vedação e só ter colocado fita isolante por cima , não apertou mais os fios por dentro e não deu mais problema. Meio ruim também do fornecedor não ter feito a quantidade de enrolamentos iguais para as cinco bobinas da armadura, bem óbvio que isso foi resultado de falha humana por conta de ter feito manualmente.
Very good video with lots of handy tips! Its always a nightmare getting the pinion gear off a motor lol
Good job, the first good video about motor winding.
thank you sir
Yes 🥰
Great and interesting again zana. Thank you
Thank you good man. How are you?
Thank you very much, long search so video greetings from Germany. Vielen Dank schön Lang such so Video Grus von Deutschland
Thank you so much! Form Poland.
thank you sir
Another great tutorial video
Thumbs up
thank you sir
Bravo Bravissimo complimenti !!!
so nice sir good done and good tools
Great job !! Rewind motor mini super !!!
thank you sir
Magnifique vidéo !
Merci Monsieur
Ótimo trabalho, essa ferramenta é muito boa .
obrigado senhor
Another success, thanks for sharing
Thank you sir
Duuude - I may have slightly better tools, but you have much better knowledge. REALLY entertaining repair job, well done!
it was awesome content. And Thank you, because that you didn't use any background music.
خیلی خوب و کاربردی بود.
ممنون که از موسیقی در پس زمینهء کلیپ استفاده نکردی.
thank you sir, is work time
ممنون آقا، وقت کار است
lovely repair/rewind , liked and subbed
thank you sir
thank you for the knowledge
congratulations you are the best ! my favorite youtubeur
thank you sir
أحسنت العمل أستاذي العزيز 👍
اشكرك اخى العزيز
Deberías instalar de forma más segura la base ,pero me encantó
04:00 - Great idea adapting the gear extractor, but the central pin could have been just a tiny bit longer. Wouldn't have needed to hit the shat to extract the gear.
Mükemmel eline emeğine sağlık usta.siz bobinaj ustası mısınız?
detaylı anlatım için teşekkürler.
teşekkürler bayım
You are so very good sir wish I was near your area for lessons.
thank you sir
Wonderful video
ده س خؤش سه ركه وتووبى انشاءالله
سوپاست دەکەم بەریزی
Excellent, thank you!
thank you sir
Good Job, as always...
thank you sir
Rotor weight balancing is a real nice touch...
Thank you sir
Thanks for this helpful video. Hello, we are waiting for you with other posts
thank you sir
Tks for the helpful video. I really like brushed motor than brushless one.
Well done!
Thank you sir
Guter Job 👍👍.
Danke mein Herr
Good Job🙂
Thank you sir
pritty cool... congrats!
thank you sir
Dast xosh 👍
بةريزى
Good , i like this
Thank you sir
Гарна робота
Дякую вам сер
Great work my brother.
thank you my teacher
Your welcome my dear brother.
thank you my best friend
Wow, wonderful video.
thank you sir
Lijadora excéntrica recargable PAEXS 20-Li A1 estás se estropean mucho me duró un año y no la use mucho. Estaría bien que encontraras una y averiguaras los problemas que vienen de fábrica. También la fresadora de 12v un fracaso tuve que reclamar tres veces y sin problema me mandaron la máquina. Pero a todas se les estropea el motor. Y sin hacer mucho esfuerzo. Te escribo esto porque estoy viendo que eres un genio. Un saludo cordial
gracias Señor
Saving resorces, for that👍👍👍
Great
انت عبقري احسنت العمل
اشكرك اخى العزيز
nice video🔥🔥🔥
thank you sir
BRAVO !!
احسنت يا صاحبي الغالي
اشكرك اخى العزيز
MUITO BOM!!!!!!!!!!!!!!!!!
obrigado senhor
@@zana3587 Eu que agradeço.
Buen video bro
gracias Señor
@@zana3587 te demoraste como 8 años en traducir estos comentarios no?Xd
You're the best
Thank you sir
Could you please advice if this for forward and revese rotation you winding.. NICE AND CLEAR VEDIO... &
Ben de aynı teşkilattan yaptım her şeyi kendim yaptım Çok şahane oldu yalnız hazır değil şomundan yaptım
ok
شغلك جيد جدا
اشكرك اخى العزيز
Parkside dobar alat za izbjegava
nije loše, bolje od kineskih alata
Good ... Conciliation is permanent
thank you sir
No need to remove the drive cog as it will pass through the aperture of the casing, good job nether .
Amazing
Thank you sir
Thanks for this job . I have seam proplem so sad for my parkside 😔 The copper strips were damaged by the heat and the inner fan melted, and the inner core must be changed .
sorry for you sir
@@zana3587 thanks pro
لا اتقن اللغة الانجليزية والا لكتبت فيك مقالا يليق بمقامك!شكرا لك ،وكاني سافرت عبر البحر tankyou
better than original one, everithing is greased well
thank you sir
Really good work, but sere se find the people like you?? Now all technical Just change It no spento time to ripare...anyway great work!!
Very good
Thank you sir
Your fine job would do so well with tape decks.
thank you sir
Never use glows when you work with a Drill press.
My brother lost half of a finger!
👌👌👌👌👌
thank you sir
Dear friend!
I really enjoy watching your videos. I believe I've seen them all!!
Where is that paradise with all these damaged Parkside?
I have a question that you could answer:
What if i wanted to make a 12volt dc motor from a cordless drill to work with 18volts?
What should I do?
thank you sir. no idea about 18 to 12v
Same motor was in DC battery fan ....i bought identical motor n changed its backplate n armature ....from new motor...I was bit lazy for that much work 🤪🤣🙄
Suportul pentru carbuni de pornire se gaseste in comert?
Man you put some effort into that motor, most people would have bought a new one from Ebay. Interesting way of balancing buy the way
Man you put some effort into that motor, most people would have bought a new one from Ebay. Interesting way of balancing buy the way
Gros travail, mais moi aussi je l'ai fait .... ce serait à refaire, je changerais le moteur. Il faut être ( comme moi ) en retraite pour se lancer dans ce genre de travail ...
Merci Monsieur
Лайк
баярлалаа эрхмээ
@@zana3587 ????
👍
سوپاس
I thought when you increase the diameter of the coil you have to decrease the number of turns?
yes sir
👍👍👍👍 Also wir hätten das ganze Gerät in den Müll geworfen oder so ein Discounter Gerät erst gar nicht Gekauft.