I’m running Badlands MX38’s on my ET48.3 with a 17t pinion on 5’s and was getting very hot. Just put a 15t on tonight hoping to help out, I also turned my punch and timing down a little. Hobbywing Xerun and 2000kv sensored. I can be going almost any speed and at full punch it will just start doing standing backflips on flat ground. Might try a fan also if the temps don’t come down with the other adjustments.
Nice bash this will be one of my next 2 trucks for sure. I have the monster x in my mt410 with 2200kv motor and 16t pinion and it was on the edge of running hot. I got one of the hobbywing heatsink/fan units and it brought my temps down about 20-25 degrees for me and I'm in the south. Seemed to work well, just a suggestion and they are $10... bash on bro, love it!!!
What's Up Bro. Just finished building my tekno et48.3. Waiting For The Weather To Get Better Here in New York. I ace double back flips. You Need 6s Tony Really Do It. Great Bashing Bro.
Sick rig! I already have the MT410 based on your recommendation. So much fun. Trying to justify adding this truggy to my collection, just a lot of $. Already have a Kraton, mt410 and summit. Lol
Very nice. I got this as a roller for way cheaper then new and fixed it up over time, just check eBay every now and then and you might get lucky like I did
What happen to the terrain crushers, what of the tires are too heavy, maybe it will run cooler with the terrrain crushers they look better in my opinion, definitely getting those for my et48.3 when i get it.
Hey man I love your videos. I'm jumping off the traxxas ship and I want a kit. I have it narrowed down to the ET48.3 or the MT410. Which do you think is a tougher truck? I'm strictly going to bash it. Thanks,
Hi Gary i asked you about your steering servo in the past you said you run the JX 20kg servo from banggood. I checked it out not sure if its the right one or not that i was looking at. Does yours have a model number on your servo. JX makes a few 20kg. I just want to order the correct one thank you.
I'm with you my et48.3 is probably about my favorite RC on the planet . Of course I don't really bash mine. I'm not a tekin guy either. But don't care for castle personally I'm mostly hobbywing guy. Grip it and rip it West coast Fam.
KillerOffRoadHobbyz ... I was thinking of converting my 410 to that truggy chassie but the rest as the 410 mt. Just waiting on the truggy chassis to become available again to do this
Sweet truck !! I know you love your gigantor tires lol but man 200° is far to hot ,it maybe time to use lighter tires .... And that Lazer gun you are useing I have the same one ..you can't go off of where the Lazer is pointing when useing it so close you have to aim the Lazer just above what you want temped , like maybe a inch above ..or just move it all around untill you get the highest temp the highest will be the true temp .. just thought I'd throw that out there ..it would be a shame to think your temp is 130 when it's 200° ...
Your huge tires and the 2250kv is why it's over heating a bit. If you go with a 2000kv or less and truggy or normal MT tires it won't overheat 👍 You have probably heard all that before though 😂😂
KillerOffRoadHobbyz Ah, I see. I always bin a castle man myself. Though I've heard good things about Tekin...Good info to know. Thanks! Awesome videos!
KillerOffRoadHobbyz that is prob the best way. I look for used trucks. But nothing around me. The down side of living high in the Newhampshire mountains I guess. 👍
I’m running Badlands MX38’s on my ET48.3 with a 17t pinion on 5’s and was getting very hot. Just put a 15t on tonight hoping to help out, I also turned my punch and timing down a little. Hobbywing Xerun and 2000kv sensored. I can be going almost any speed and at full punch it will just start doing standing backflips on flat ground. Might try a fan also if the temps don’t come down with the other adjustments.
Nice bash this will be one of my next 2 trucks for sure. I have the monster x in my mt410 with 2200kv motor and 16t pinion and it was on the edge of running hot. I got one of the hobbywing heatsink/fan units and it brought my temps down about 20-25 degrees for me and I'm in the south. Seemed to work well, just a suggestion and they are $10... bash on bro, love it!!!
Sweet thanks man I will look into that
What's Up Bro. Just finished building my tekno et48.3. Waiting For The Weather To Get Better Here in New York. I ace double back flips. You Need 6s Tony Really Do It. Great Bashing Bro.
Thanks brother and sweet man you are going to love the ET48.3 for sure
Tekno and cen are my go to now. Great bash team
Definitely Need A Fan. All My Trucks Have Fans On The motor. Helps A Lot.
On the way
Sick rig! I already have the MT410 based on your recommendation. So much fun. Trying to justify adding this truggy to my collection, just a lot of $. Already have a Kraton, mt410 and summit. Lol
Very nice. I got this as a roller for way cheaper then new and fixed it up over time, just check eBay every now and then and you might get lucky like I did
You're making me want to finish my EB48.4 ASAP. I'm going to truggify it just for the heck of it.
Awesome send me a pic when your all done plz
Dang that dog is fast! Wonder what its on: 5s, 6s? Its funny how it stops before the jump. Probably wondering what kind of cat is that, does 360s.
You're getting pretty damn good.
Thanks brother
What happen to the terrain crushers, what of the tires are too heavy, maybe it will run cooler with the terrrain crushers they look better in my opinion, definitely getting those for my et48.3 when i get it.
Still have them just like these big tires lol
Try the new HB E817T, no one made a running video of it yet, none that I know of. Nice video!
I don't have that kinda money right now or I would
Hey man I love your videos. I'm jumping off the traxxas ship and I want a kit. I have it narrowed down to the ET48.3 or the MT410. Which do you think is a tougher truck? I'm strictly going to bash it. Thanks,
MT410 will be a little but both are amazing
Hi Garry, could You please tell me which oil weight You are using in this Tekno for center diff and which one for other cars like Kraton?
Kraton is 50k front 200K center and 20k rear
Tekno I did 20k front 100k center and 10k rear
Hi Gary i asked you about your steering servo in the past you said you run the JX 20kg servo from banggood. I checked it out not sure if its the right one or not that i was looking at. Does yours have a model number on your servo. JX makes a few 20kg. I just want to order the correct one thank you.
Here's a link
www.banggood.com/JX-PDI-6221MG-20KG-Large-Torque-Digital-Coreless-Servo-For-RC-Model-p-973947.html?rmmds=search&cur_warehouse=CN
KillerOffRoadHobbyz thank you Gary
I’m bidding on one of these on eBay. Roller with tires and Servo and some extra parts. Should I goes as far as 350 or 400
Very nice
That sucks that the little kids are digging up the jumps excellent video bro
I'm bummed but I'll just have to go out there and do some work myself I guess
Got to get me a tekno in my collection might be the truck MT410 👊💪⚡nice video brother 💯
Tekno is KING lol
Ha, you had barely over 100 subscribers when I joined your channel. Congrats on your growth bud
Thank you and yeah it's been a long road but things are going great now
I will be getting one of these, just waiting on my incometax😁
It's 100% worth it
I'm with you my et48.3 is probably about my favorite RC on the planet . Of course I don't really bash mine. I'm not a tekin guy either. But don't care for castle personally I'm mostly hobbywing guy. Grip it and rip it West coast Fam.
Great minds think a like my friend lol, I love Hobbywing as well. Thanks for watching and I gotta stop by your channel and get some watch time
Thanks brother.
Do you like this better than then the 410Mt
I like the MT410 a little more just cause of how long I've had it but they are neck and neck
KillerOffRoadHobbyz ... I was thinking of converting my 410 to that truggy chassie but the rest as the 410 mt. Just waiting on the truggy chassis to become available again to do this
Looks like you made a new friend out there, lol! 😂😂
The truggy did for sure
Sweet truck !! I know you love your gigantor tires lol but man 200° is far to hot ,it maybe time to use lighter tires .... And that Lazer gun you are useing I have the same one ..you can't go off of where the Lazer is pointing when useing it so close you have to aim the Lazer just above what you want temped , like maybe a inch above ..or just move it all around untill you get the highest temp the highest will be the true temp .. just thought I'd throw that out there ..it would be a shame to think your temp is 130 when it's 200° ...
Thanks for the info and I have a motor fan on the way hoping that will cool her down but if not smaller tires I guess ;-(
Your huge tires and the 2250kv is why it's over heating a bit. If you go with a 2000kv or less and truggy or normal MT tires it won't overheat 👍 You have probably heard all that before though 😂😂
I know the tires are big but I like them lol I got a Hobbywing fan on the way hope it helps
Hey Gary, a guy named Ramon turned me on to your channel so I'm gunna check it
out...... ; -)
Thanks man and tell him thank you as well
Nice rig. Who actually dug the jumps up? The biker kids?
I think so
Any particular reason why you don't like Tekin product's?
I don't like having to reprogram them to run a different cell count
KillerOffRoadHobbyz Ah, I see. I always bin a castle man myself. Though I've heard good things about Tekin...Good info to know. Thanks! Awesome videos!
There good just pricey and the reprogram thing but if you race they are very good
Tekin is great stuff and easy to program
KillerOffRoadHobbyz they auto calculate cells, your wasting your time with castle products.
Bring your own shovel, I’ve done that before
I will next bash my friend
You have been great help thank you sir give a shout to sic1 gaming
600$ bashing buggy. Just to steep for my blood. Looks pretty cool I it to much $
Yeah and that's just for the kit, I got this a a roller tho and fixed it up and built it over time
KillerOffRoadHobbyz that is prob the best way. I look for used trucks. But nothing around me. The down side of living high in the Newhampshire mountains I guess. 👍
It actually all works out more even in the end. After breakages and upgrades to others the tekno is a fair price
Hey gary y dont u get your wife two rip a rc around with u
I have a little but she was ok with me ripping her Rc in the last bash
#1 😎
Too bad about the jump
With a little work I'll get them fixed