U alright my friend, fellow nogaro b5 s4 owner. I have a nagging issue where I get no boost at all, suspect it might be an n75 or wastegate issue but just shooting in the dark right now. Wondering if you have experienced anything similar. Much appreciated thanks
@@TC-db5fm Whats up noggy brother. No boost can be a few things. large boost leak, stuck open wastegate, damaged or broken impeller or turbine wheel or broken turbo shaft. bad n75 will cause boost to stay on wastegate pressure or the bust to fluctuate.
@@TC-db5fm do you hear whistle noises like a boost leak? You may have just popped a boost hose off some where, it's also not uncommon to pop a hole in the rubber y that connects the boost pipe to the throttle body.
@@darrell81 no whistles at all no, k03 units on a stage 1 plus tune. No tears on tbb as far as I can see nor any visible leaks in piping. I'll have to look deeper I guess. Help is much appreciated thanks
Congrats guys. It’s crazy to me how “car guy” shop owners and even anyone on the internet that professes to be into cars can’t see the passion and talent involved in building something like you two have done here. Hats off. Hope the future brings great things.
I have a bone stock '03 GTI VR6 (24v) which is now 20 years old, with only 124,000 miles. Original owner, garaged, babied and maintained, 6-speed manual, leather interior... my gem! More reliable than my family's Toyotas and Hondas over the years! I watch this video and smile thinking what a potential beast my humble 201HP engine could be if I was young and crazy...
George and Stav you guys are such a great inspiration! Your passion,constant learning and developing now pays off. Can you realise that you are THE FIRST in the world who dare to swap motor from the RS3 and custom fit an R30 VR6? That feeling must be priceless 👏 Many times I said this but I am so proud to be your subscriber👍 Congratulations to both of you!
Hello guys ! I have been watching some of your videos for few years now, I have been working on VR6 engines for the last 24 years, I do have a full built MK3 Golf VR6 24V turbo AWD, Running on a precision 7275 turbo at 45 PSI of boost, I do know what you guys went through on you vr6 turbo build-up, because I felt all the pain on my own build-up, Only few people here may understand the pain, frustration the wasted time waiting for parts, or the bad feelings when something didn't work out too well and need to be done, A project at this lever for any car comes with a lots of stress, wasted time, and you got to have a lots of money to buy all the parts needed to build it, I the same way got my own tools and built my car inside my garage, so I personally feel your pain, it's a long road that need a lots of patience, I do wish you guys the best, I hope you guys enjoy your built cars, today I'm marriage, 48 years old with 2 boys, one 17 years old and a 8 years old, I stated my first VR6 turbo back in 1998 , had my first one for 10 years, and sold it, Now on my second vr6 turbo, I have this one for 14 years, and let me tell you guys something, enjoy every day of building, driving, fixing it, do what you like, life is short, my last 24 years working on my VR6 Turbo cars went buy too fast, I don't regret it and I would do it all over again, because I love working on my race car, it takes my mind from the every day stress we go through in life, to me it's like a therapy and every time I take my race car out and hear the turbo spooling up it puts a smile on my face, Life is too short, time Flys, enjoy what you like to do, I wish you guys the best,, keep up with your good work, I take my hat off to your guys for all the hard work, it really takes a lot for a build like this, Enjoy every minute, Atila
I definitely look up to you guys. I don't have any help or support on my b5 1.8t. I've basically built the car on my own with a little help from a friend here and there. But I can tell you that you guys have motivated me to keep pushing my build to where it is now and I didnt expect to push it as hard as I have. So thanks for all the content, keep it coming! I'm ready to see this beast destroy everything on the street.
At some point I was happy with a mk3 3.0 vrt in my life but this is next level stuff and garage built is icing on the cake. Anyone can just write a check and have shop done it. Congrats fellas!
It really is sad that someone told you it couldn’t be done, but what a fucking motivation. I’m sure some people told those shops that things they wanted to do couldn’t be done and now they are making money doing it. For you younger people out there, DON’T EVER let someone tell you what you can or can’t do in life.
So stoked to see this! Looks and sounds amazing! I was so pumped to see this thing at the Big SoCal Euro meet last October--just the sheer size of the intake is ridiculous! Happy for you guys, looking forward to seeing more content about the R30/VRS3, and it was awesome meeting and getting to talk to you, George and Stav! Two of the most genuinely good dudes in the Euro scene. Wish you guys the best, and hope to see you at the Big SoCal Euro meet in a few months! 🤘🏼
Gotta say despite being utterly sickened, revolted and down-right offended by the engine swap ... watching you guys work hard, learn and get it done bit by bit has been the most touching youtube series I watch. I really hope your rods stay straight, your valves unbent and your boost unleaked. So happy to see the results.
Dont understand why’d you be offended when vr6s come from vw/audi group. And plus one of the best motors out there. This is a one of a kind unique build. Doubt we’ll see more of these, one to be appreciated and looked at😊
The intriguing piece of this entire project is that it's YOUR BUILD... Facts. You proved a lot of people wrong, yet proved a lot of people RIGHT. Plz dont stop. Thanks for setting a great example, my dudes. Cheers!
You guys did an awesome job on this build. I knew you were talented but I have to admit at first I thought this wouldn't get finished. The amount of work, determination and fabrication that went into this is crazy. The engine bay looks perfect and the car sounds amazing. Great job 👍
This was quite the undertaking. We are just two malakas with full time jobs that work opposite shifts and had a lot to figure out but it’s only hard if you take the whole project and don’t break it down into sections and figure out one issue after another. It’s been a lot of fun learning to wire and syvecs ecu -stav
First of all, Congrats! I will admit, I was one of the people who was slightly upset at first. If I'm being honest, it was partially because you were 80% of the reason I even bought the rs3 to begin with lol so I felt betrayed for some reason... and the other part was now that I have spent 50k on the car I felt the need to justify it.. but I've come full circle and am happy to support you guys. You're breaking the mold, expanding the knowledge for everyone, and just all-around good people.
George and Stav 👍 well done guys 👌. The engine sounds great. Can't wait to see silver piggy burn up the road and track Gents 👍. You both did one hell of a job. Getting to where you are now my friends. Jasos from Melbourne Australia 👍
You motivated me to build my mqb, that I documented on my channel, in my driveway under some poles with towels hanging over so the sun didn’t kill me. I was told so much it would blow on the first start up and now this sucker is going on 12000 miles without a hiccup 😂
I couldn't concentrate on anything but that stuffed nitrous bottle rolling around behind you. Get a proper mount for that thing. LOL !!! Jokes aside that beast sounds wicked (DTF).
George with the classic Dunning-Kruger effect. You guys are not a bunch of idiots. You are legends and have inspired me to move over to this platform. Shout out from the east coast. I hope to hear this car in person some day.
Rs3 it's my dream car, but this built is insanely gorgeous makes it perfect! Hope once you guys finish developing everything we get the chance to order from you guys 👌👌💪
Best part of the video🙌🏼is the motivation at the end.....much respect to you guys on this awesome build.... definitely gained a new subscriber and follower of your craft,love it🙏 wishing you nothing but the best in whatever you guys do
I am so proud to call you guys friends and brothers. The work you are doing is nothing short of jaw dropping. That extraneous cylinder sure do be sounding throaty. 👍
Greetings from the team from the PROJECT CARS TUNING You Tub channel, we are also preparing the Vr6 3.6 Turbo in the Audi TT RS and a big greeting from the BALKANS
Congratulations guys!!!!!!!! Car sounds absolutely wicked!!! Through all the negative shit you guys have succeeded😁 can't wait to see what's next looking forward to seeing the first run and we gonna be holding you to the 8 sec off the trailer lol
Love it love it love it!!! You guys are Golden, keep doing what you're doing. It was a pleasure seeing this car in person. Can't wait to see/hear it now.
I was so disappointed when u pulled the 2.5 out as didn't feel like it was in long when running big power but I must admit I'm loving the new engine can't wait to see where it goes 👌👍
Hi George, hi Stav, just a few words from France to congratulate for all the great job you did so far and to thank you for all the information sharing about your incredible journey that I'm following since the beginning with a lot of interest. I'm a big fan of VW and Audi, especially G60, VR6 and Audi's 5 cylinder, but the swap and all the related building and adaptations you guys decided to perform is just amazing and your challenge is a source of motivation to overcome difficulties for all enthusiasts that have the will and the capabilities to engage themselves in the same kind of adventure. I wish you all the best for the future and once again congratulate you for your passionate, methodical and professional approach (whatever the stupid haters can think or say about your project), you're doing a great job, you're doing it the right way and with the right spirit !!! Good luck to you for the coming steps, stay the same and just carry on as you did so far 😉👍
Congratulations on this wookie power RS3. Sounds amazing and everything looks super clean and nicely done. That’s cool that you guys took control of your build and didn’t let the ney sayers discourage your dreams. I’m also starting to do all my own work on my own VW’s . I used always paid for work done to my car. But now it’s so empowering been able to do it myself. Keep up the good work.
I'm in the same boat with you malakas, people telling you how to do stuff and how it should be. Fuck that and do it just the way you want. So much respect for doing what you do. Can't wait for new videos.
Everyone hates the AWD GLI, "Just buy an A3". Like no dude, I like to build things and I'm going to build what I want not just buy it. Not to mention you learn so many new skills doing this kind of stuff. That's the real enthusiast level stuff.
Well done guys this car sounds incredible and especially on idle love the sound of the cams can’t wait to see further progress just an amazing job and good on you and your brother for pushing on ,you guys should be proud of your innovation and not giving up!!!
Amazing achievement to you both! Only recently started "subscribing" to you tubers and you were the first! Love that you are throwing it out there proving things can be done with all the persons failing you before you finished! Love the noise this thing is making and tells me i should start looking back into increasing the power back in my T/C R32 Golf.........Keep the good work and producing these videos!
This was the video that we have been waiting for. The VR30 sounds amazing. Staying positive and proving the haters wrong is the best way to be.
U alright my friend, fellow nogaro b5 s4 owner. I have a nagging issue where I get no boost at all, suspect it might be an n75 or wastegate issue but just shooting in the dark right now. Wondering if you have experienced anything similar. Much appreciated thanks
@@TC-db5fm Whats up noggy brother. No boost can be a few things. large boost leak, stuck open wastegate, damaged or broken impeller or turbine wheel or broken turbo shaft. bad n75 will cause boost to stay on wastegate pressure or the bust to fluctuate.
@@TC-db5fm do you hear whistle noises like a boost leak? You may have just popped a boost hose off some where, it's also not uncommon to pop a hole in the rubber y that connects the boost pipe to the throttle body.
@@darrell81 no whistles at all no, k03 units on a stage 1 plus tune. No tears on tbb as far as I can see nor any visible leaks in piping. I'll have to look deeper I guess. Help is much appreciated thanks
Appreciate the kind words and support 💪💪
Congrats guys. It’s crazy to me how “car guy” shop owners and even anyone on the internet that professes to be into cars can’t see the passion and talent involved in building something like you two have done here.
Hats off. Hope the future brings great things.
I have a bone stock '03 GTI VR6 (24v) which is now 20 years old, with only 124,000 miles. Original owner, garaged, babied and maintained, 6-speed manual, leather interior... my gem! More reliable than my family's Toyotas and Hondas over the years! I watch this video and smile thinking what a potential beast my humble 201HP engine could be if I was young and crazy...
VR6 Sound one of the Best of the World!🔥❤
George and Stav you guys are such a great inspiration!
Your passion,constant learning and developing now pays off. Can you realise that you are THE FIRST in the world who dare to swap motor from the RS3 and custom fit an R30 VR6?
That feeling must be priceless 👏
Many times I said this but I am so proud to be your subscriber👍
Congratulations to both of you!
Thank you sir it’s been a fun journey now to make some Wookiee noises
You guys are amazing, what can i say one of a kind and I love it 👌🏾👏🏾👏🏾👏🏾👏🏾
Hello guys !
I have been watching some of your videos for few years now, I have been working on VR6 engines for the last 24 years, I do have a full built MK3 Golf VR6 24V turbo AWD, Running on a precision 7275 turbo at 45 PSI of boost,
I do know what you guys went through on you vr6 turbo build-up, because I felt all the pain on my own build-up,
Only few people here may understand the pain, frustration the wasted time waiting for parts, or the bad feelings when something didn't work out too well and need to be done,
A project at this lever for any car comes with a lots of stress, wasted time, and you got to have a lots of money to buy all the parts needed to build it,
I the same way got my own tools and built my car inside my garage, so I personally feel your pain, it's a long road that need a lots of patience,
I do wish you guys the best, I hope you guys enjoy your built cars, today I'm marriage, 48 years old with 2 boys, one 17 years old and a 8 years old,
I stated my first VR6 turbo back in 1998 , had my first one for 10 years, and sold it,
Now on my second vr6 turbo, I have this one for 14 years,
and
let me tell you guys something, enjoy every day of building, driving, fixing it, do what you like, life is short, my last 24 years working on my VR6 Turbo cars went buy too fast, I don't regret it and I would do it all over again, because I love working on my race car, it takes my mind from the every day stress we go through in life, to me it's like a therapy and every time I take my race car out and hear the turbo spooling up it puts a smile on my face,
Life is too short, time Flys, enjoy what you like to do, I wish you guys the best,, keep up with your good work, I take my hat off to your guys for all the hard work, it really takes a lot for a build like this,
Enjoy every minute,
Atila
Love your car brother.
I definitely look up to you guys. I don't have any help or support on my b5 1.8t. I've basically built the car on my own with a little help from a friend here and there. But I can tell you that you guys have motivated me to keep pushing my build to where it is now and I didnt expect to push it as hard as I have. So thanks for all the content, keep it coming! I'm ready to see this beast destroy everything on the street.
Can't beat that sound. Nothing like it
At some point I was happy with a mk3 3.0 vrt in my life but this is next level stuff and garage built is icing on the cake. Anyone can just write a check and have shop done it.
Congrats fellas!
Thank you sir
It really is sad that someone told you it couldn’t be done, but what a fucking motivation. I’m sure some people told those shops that things they wanted to do couldn’t be done and now they are making money doing it. For you younger people out there, DON’T EVER let someone tell you what you can or can’t do in life.
This has been my favorite build on RUclips for the past year. Great job guys.
Thank you very much for following. We are just getting started
Thsnks My Guy it's a great opportunity for us as individuals to see someone can do that. 🙏🙏👌👌👌👌
Big fan from South Africa.This vid is a great surprise. Awesome to see the progress. Now go break those records!!!
Congrats George and Stav! Wookie noises are here! Can't wait to see what this thing does at the track! 👏🔥
Will be a lot of fun. Really excited to see where we can take this
gotta love that product placement harbor fright built hell yeahs
So stoked to see this! Looks and sounds amazing! I was so pumped to see this thing at the Big SoCal Euro meet last October--just the sheer size of the intake is ridiculous! Happy for you guys, looking forward to seeing more content about the R30/VRS3, and it was awesome meeting and getting to talk to you, George and Stav! Two of the most genuinely good dudes in the Euro scene. Wish you guys the best, and hope to see you at the Big SoCal Euro meet in a few months! 🤘🏼
1100hp “minimal dyno number” 😂 love it! Great job guys, this is some amazing work
WD guys, that hard work has paid off.
Been waiting for this video. Mad respect for these malakas pulling this off all by themselves in a garage at home!
Gotta say despite being utterly sickened, revolted and down-right offended by the engine swap ... watching you guys work hard, learn and get it done bit by bit has been the most touching youtube series I watch. I really hope your rods stay straight, your valves unbent and your boost unleaked. So happy to see the results.
Dont understand why’d you be offended when vr6s come from vw/audi group. And plus one of the best motors out there. This is a one of a kind unique build. Doubt we’ll see more of these, one to be appreciated and looked at😊
@@8vdrei It was said with a wink and a smile, part of the fun of this build is upsetting people who find it atrocious.
The intriguing piece of this entire project is that it's YOUR BUILD... Facts. You proved a lot of people wrong, yet proved a lot of people RIGHT. Plz dont stop. Thanks for setting a great example, my dudes. Cheers!
Good job guys.. It's only a matter of time till I see this on Hoonigans This VS That.
We got some drag strips to hit first. And get some solid numbers
You guys did an awesome job on this build. I knew you were talented but I have to admit at first I thought this wouldn't get finished. The amount of work, determination and fabrication that went into this is crazy. The engine bay looks perfect and the car sounds amazing. Great job 👍
This was quite the undertaking. We are just two malakas with full time jobs that work opposite shifts and had a lot to figure out but it’s only hard if you take the whole project and don’t break it down into sections and figure out one issue after another. It’s been a lot of fun learning to wire and syvecs ecu
-stav
glad to see you doing well
car sounds amazing
Y’all are inspiring. Keep up the great content, I learn something with every video you guys make. Hoping to VR6 swap my B7 once the 2.0 grenades!
I have a 2008 Volkswagen Passat VR6 4MOTION Wagon that runs and drives but needs some work that I KNOW you want to bless with your magic!
First of all, Congrats! I will admit, I was one of the people who was slightly upset at first. If I'm being honest, it was partially because you were 80% of the reason I even bought the rs3 to begin with lol so I felt betrayed for some reason... and the other part was now that I have spent 50k on the car I felt the need to justify it.. but I've come full circle and am happy to support you guys. You're breaking the mold, expanding the knowledge for everyone, and just all-around good people.
"Lets make a right turn"...Turns Left. LOL, Amazing car, sounds epic. I want one.
George’s sense of direction is on full display
George and Stav 👍 well done guys 👌. The engine sounds great. Can't wait to see silver piggy burn up the road and track Gents 👍. You both did one hell of a job. Getting to where you are now my friends. Jasos from Melbourne Australia 👍
Again by far my favorite build on RUclips
I live in that same city can’t wait to see you fly by in it
Well done George and Stav . Dream Build Huge respect . 🇿🇦👏
But let’s be honest you would of picked a better color lol
-stav
@@MalakaMotorSports Just as it is is fire Brother 🙌🤣
Im motivated, i like your narrate anything is possible....💚💚💚💚
You motivated me to build my mqb, that I documented on my channel, in my driveway under some poles with towels hanging over so the sun didn’t kill me. I was told so much it would blow on the first start up and now this sucker is going on 12000 miles without a hiccup 😂
congrats - nice work ! love the wookiee sound...
I couldn't concentrate on anything but that stuffed nitrous bottle rolling around behind you. Get a proper mount for that thing. LOL !!! Jokes aside that beast sounds wicked (DTF).
Just the sound of that motor man! loved the sound of the Wookie War Cry 👌🏾
George with the classic Dunning-Kruger effect. You guys are not a bunch of idiots. You are legends and have inspired me to move over to this platform. Shout out from the east coast. I hope to hear this car in person some day.
Thank you so much for the compliments. East coast is on our list sometime next year if everything goes as planned
LOVE the closing statements and the shots fired ! Give all the doubters something else to lose sleep over!
Sounds amazing, awesome to see it moving. Excited to see its numbers.
Sounds better than German v8's and v10's. VR6 > Everything else. Great work guys!
Good inspirational words! Always be learning, folks! Keeps life interesting!
Rs3 it's my dream car, but this built is insanely gorgeous makes it perfect! Hope once you guys finish developing everything we get the chance to order from you guys 👌👌💪
Best part of the video🙌🏼is the motivation at the end.....much respect to you guys on this awesome build.... definitely gained a new subscriber and follower of your craft,love it🙏 wishing you nothing but the best in whatever you guys do
Sounds Amazing, nice work so far..
Such a sick engine bay. Good lord man!
I am so proud to call you guys friends and brothers. The work you are doing is nothing short of jaw dropping. That extraneous cylinder sure do be sounding throaty. 👍
Thanks bud. The future development looks promising
@@MalakaMotorSports nothing matters if you're enjoying the ride, and I know that you are.
Bro you've got that skyline sound track 👊🏿🔥💯
stav is the man that can 💯💯
nice! it sounds amazing. cant wait to see it make a full pass
My god this is something else
Thank you very much
Those who can, do. Those who can't, talk crap behind people's backs. This is awesome! keep up the work so they can continue to talk.
Great video George, can’t wait for the beast to get on full noise. Keep up the great work lads 😁
Continuously impressed with and proud of you guys! Awesome work.
Love the build and the message at the end. VR6 FTW! 🔥 🔥 🔥 👏
Awesome 👏, can’t wait to see this lay down some power and hit the track!
Congrats, freaking built!
Greetings from the team from the PROJECT CARS TUNING You Tub channel, we are also preparing the Vr6 3.6 Turbo in the Audi TT RS and a big greeting from the BALKANS
Oh awesome. That sounds like a very fun project. What turbo?
@@MalakaMotorSports By Garrett Gtw38
That sound straight outta HELL I Love It Massive ROAR
Well said to haters out there! I’m not VW/Audi guy but I follow the channel because of this unique awesome 👏 build. Well done 👍 guys 👌
Sounds heavenly my boy!!!!!!
Congratulations guys!!!!!!!! Car sounds absolutely wicked!!! Through all the negative shit you guys have succeeded😁 can't wait to see what's next looking forward to seeing the first run and we gonna be holding you to the 8 sec off the trailer lol
Definitely gave me motivation to get some upgrades done on my R32 project...I miss that sound.
It sounds soooooo good George-I am sure you and Stav are super stoked!
Very happy
Excited to gap this rs3 for the second time
-stav
Μπράβο Γεώργιο και Σταύρο 🇬🇷👍
from seeing this in person break the world record in Sacramento to this now its insane congrats man doing the audi community proud brother
Glad for you George👍🏽 I love seeing the lil guy showing the nay sayer’s 💪🏾
Car sounds amazing!!!!!!!
Engine bay is 🔥🔥
Love it love it love it!!! You guys are Golden, keep doing what you're doing. It was a pleasure seeing this car in person. Can't wait to see/hear it now.
Thank you very much.
BEAUTIFUL ALL ROUND
👏🏿👏🏿👏🏿💪🏿💪🏿
🎶 ❤️🎵❤️ 🎶❤️🎵❤️🎶❤️🎵❤️🎶❤️🎵
Amazing work guys! Vr6 with the beauty of an rs3 man, best combo. Screw the hater’s “they hate us cuz they aint us” y’all built a bad ass car.
Keep up the great work guys.. been following on IG since your "skinny" Audi 😆 then fat silver pig and now this one.. Positive vibes Brothers 🤘
This is INSANE
The Car sounds Beautiful Bro.
Thank you so much
@@MalakaMotorSports Your Welcome.
Cant wait to se it on full boost. Great work 👍🙏
I was so disappointed when u pulled the 2.5 out as didn't feel like it was in long when running big power but I must admit I'm loving the new engine can't wait to see where it goes 👌👍
Yessssss!!! Finallyy
The vr6 sounds so damn sexy, I want to own one again one day, I miss mine so much.
Do it
B R E H. SO SICK! CONGRATULATIONS
Danger to manifold custom laptop mount, w/ that NOS bottle! lol
I'm gonna have to go back and watch some back videos to catch up. I kinda lost track of your channel. Awesome build 👏 👌 😎
Hi George, hi Stav, just a few words from France to congratulate for all the great job you did so far and to thank you for all the information sharing about your incredible journey that I'm following since the beginning with a lot of interest.
I'm a big fan of VW and Audi, especially G60, VR6 and Audi's 5 cylinder, but the swap and all the related building and adaptations you guys decided to perform is just amazing and your challenge is a source of motivation to overcome difficulties for all enthusiasts that have the will and the capabilities to engage themselves in the same kind of adventure. I wish you all the best for the future and once again congratulate you for your passionate, methodical and professional approach (whatever the stupid haters can think or say about your project), you're doing a great job, you're doing it the right way and with the right spirit !!! Good luck to you for the coming steps, stay the same and just carry on as you did so far 😉👍
Thank you sir
Congratulations on this wookie power RS3. Sounds amazing and everything looks super clean and nicely done. That’s cool that you guys took control of your build and didn’t let the ney sayers discourage your dreams. I’m also starting to do all my own work on my own VW’s . I used always paid for work done to my car. But now it’s so empowering been able to do it myself. Keep up the good work.
Brooooo 🙌 am just excited as you are pleaseeee put the OEM driver seat back you guys rock 1LOVE from 🇿🇦....
What Malaka Motorsports has pulled off is motivational to say the least.
Well Done Guys. Time to make some JAM now.
Awesome build! Stoked to see it on the road! Car sounds amazing! Nothing like a VR6!!!!!!!
6 > 5
I'm in the same boat with you malakas, people telling you how to do stuff and how it should be. Fuck that and do it just the way you want. So much respect for doing what you do. Can't wait for new videos.
Congratulations on the car guys, you should be proud, sounds incredible!
Congrats Malaka! She sounds good. Look forward to going for ride in it again.
sick build dude!
Everyone hates the AWD GLI, "Just buy an A3". Like no dude, I like to build things and I'm going to build what I want not just buy it. Not to mention you learn so many new skills doing this kind of stuff. That's the real enthusiast level stuff.
Awesome guys!!!! Inspires me to maybe rethink my Golf R! 🤘🏻🤘🏻🤘🏻🤘🏻
Well done guys this car sounds incredible and especially on idle love the sound of the cams can’t wait to see further progress just an amazing job and good on you and your brother for pushing on ,you guys should be proud of your innovation and not giving up!!!
Yes sir always trying to be different. Vr6 FTW
@@MalakaMotorSports makes me want to do the same thing in a golf r instead of a 5 pot swap!!!
VR6 is still my favorite sounding motor. Especially boosted.
wow just wow
Amazing achievement to you both! Only recently started "subscribing" to you tubers and you were the first! Love that you are throwing it out there proving things can be done with all the persons failing you before you finished! Love the noise this thing is making and tells me i should start looking back into increasing the power back in my T/C R32 Golf.........Keep the good work and producing these videos!
Thank you for subscribing
Extremely Cool! I need this on my Q5!👌
Awesome build bro!! I've always built honda/acura engines, but I absolutely love the VR engines!! That sound is noticeable from blocks away!😂
My boys did it thanks for the material i been rooting for yall since the beginning queens gets the money !!!!! Enjoy the car you guys rocC