You are so lucky to not only have Allison, there for instant information, but to be able to work on your rig at the shop! Nothing like saving money by doing it yourself!
If you have clutch fan problems there is company out there called "Kit Master" that builds exact replacements that will probably never fail again. I've replaced all my Horton clutches with them and have had great success.
One reason not to run skirts is if you back the trailer down an incline the skirts can bottom out and get messed up. Some say that the fuel savings isn't worth it.
Justin you were looking into that 587 Pete. That truck has 800,000 + miles and you were talking about an in-frame or close to one. Just fyi, there was a recall on the ISX fuel pumps due to them having ceramic plungers that were known to go to pieces and fall through the cam shaft it runs off of. If your oil filter didn't catch all the pieces the pieces that made it pass the filter would get into the lower bearings and ruin those. Also Paccar has a current recall on the aftertreatment filter can for most ISX exhaust systems $3000, but fully covered by Paccar. Ask the current owner or check that vin# and contact Peterbilt. I know because that was a recent truck I just got out of and bought a 389 with the isx. If you want to chat about it we can figure something out. The mirrors on the 587 have a single arm that when your going down the hwy it causes drag and pulls the top of the door down and creates a lot of wind that comes into the cab. When I had my truck I took it to a body shop to have the doors adjusted to fix that gap issue. Look at the Pete's with the split V- shaped mirror mount. It allows the air to pass through and not cause drag in the top part of the door. My bad for turning this into a story but I thought if you didn't know at least you do now.
Those mats can be used for transporting barrels that are not strapped together. They prevent the barrels from moving. I worked on a loading dock once and we used cardboard to do the same thing. I would save them.
On my way to search fir Allison’s Channel! Man that Side by Side looked sic, never seen anything like that up here in Michigan. Most of the off roaring up here is on the sand dunes. Or it’s a really popular place to take off road vehicles.
Justin I see WHY you have been taking your 🚛 to Alison so long when it's something that would give you problems. Knowledge is always good to get. Alison is 6'10" in knowledge ❤️
wish i had seen this. I have a 2015 pete 579 and the dang fan will come on when i stop for a few mins and wont go off the rest of the day.i have a cummins but its driving me nutty. And then today, the fan at high speed was ok, but when it switched to slower speeds its started sqreeching the belts.
What were the symptoms that your fan clutch was failing? I have an issue I think is the fan clutch leaking air… compressor cycles every couple of minutes, but only while driving, no leaks while idling, no psi loss while turned off with or without air to trailer, only while I’m driving. Fan clutch seams to operate just fine, but I can’t think of anything else that uses air ONLY while in motion. Is this something you noticed with your bad fan clutch?
If u pull air 2 air pipe on driver side and move power steer reservoir and bracket u can do job in about 3rd the time no reason to pull surge tank and shroud
Awesome video 📹 👏 Mr.Just Truck'in 🚛🚚.. a lot of area to get to , switch from old part to new part , it seem easy .. Question, if you never become a Truck Driver, would you became a mechanic working on 🚚 Trucks for a living ?? I like that buggie 😍😍😍 Big tries .. I been looking for a limousine golf cart over the summer / fall last year a bit expensive, 11k to 14k ..
Hey Justin didn't see you check the fan hub bearing assembly you have to remove the belt to check it and spin it shake it I did not and 3 weeks later the fan hub fell bearing came loose and the fan went through radiator. Its the second time I changed my fan hub the. Plastic connecctor you showed was melted so was mine the second time from the bearing failing on the hub melted that plastic connector trust me it was Expesive lesson $3500.00 with tow bill to my house and me doing the work so you doing long haul could be really costly. If it was me I would change that fan hub to only another $600.00
I do have an isx Cummins 2008 Volvo vnl and just replaced all parts for AC but still AC works only when driving highway and when I come to a stop then no AC and it starts top overheat
Looked like what we call a "proper job" in the UK busted knuckles and black hands. Know all about posh tools worked on aircraft for 45 years even made what I couldn't buy. Thanks for the insight.
I have a 2012 kenworth T660, Cummins 600hp every time the fan engages it screeches like a Banshee, do you think I can get the mechanics to change the Fan Hub, Im just about ready to quit...
I don't know where you get 1100 bucks for repair I had 2 replaced on my 2011 Volvo ISX new clutch and mechanic bill was less than 650 bucks per time you may need to find a new shop if that is what they quoted you . That is including clutch fan .
could you not have saved some $$$$$ and just replaced the item and damaged oring that was at fault. Not sure the price of the complete clutch, or was it also damaged.
If those bullets on your front wheels ever tangle with a bicycle or pedestrian's legs, it will be a blood bath of horror. That's why they're illegal on a federal level. There are safer ways to trick out your truck.
Hey man! I just got hired at a company running regional trips. If you have some time I’d appreciate if I could ask some questions via email. What is the email you guys use for the channel?
Having someone like Allison to help out is golden !!
Allison it's the best mechanic I ever seen 2 weeks ago when she working on my isx.
thumbs up for Allison.
Yep
You are so lucky to not only have Allison, there for instant information, but to be able to work on your rig at the shop! Nothing like saving money by doing it yourself!
Allison is dope!!! Definitely someone you need in your corner when the truck needs some work!!! Good video!!!! 😎✌️
She had my truck for 2 weeks throughout the holidays. Truck is running good. Just gotta come back threw to pick up the pickup truck tomorrow
If you have clutch fan problems there is company out there called "Kit Master" that builds exact replacements that will probably never fail again. I've replaced all my Horton clutches with them and have had great success.
I'm glad you saved money but make damn sure you look after Alison. That lady needs to make a living at this.
Any reason why you haven't added the side aero skirts to your trailer? Im just a simple dentist, but I find this stuff fascinating and mezmerizing.
One reason not to run skirts is if you back the trailer down an incline the skirts can bottom out and get messed up. Some say that the fuel savings isn't worth it.
@@zavery1645 Makes complete sense. Thanks.
i did not realize volvo used cummins engines. i always thought volvo used a volvo engine exclusively. thanks for the video man
That's so awesome good friends and family love these topic's and videos
If you own trucks you MUST have a relationship with places like that.I am retired now but I always could call or go to a couple of places like that.
Justin you were looking into that 587 Pete. That truck has 800,000 + miles and you were talking about an in-frame or close to one. Just fyi, there was a recall on the ISX fuel pumps due to them having ceramic plungers that were known to go to pieces and fall through the cam shaft it runs off of. If your oil filter didn't catch all the pieces the pieces that made it pass the filter would get into the lower bearings and ruin those. Also Paccar has a current recall on the aftertreatment filter can for most ISX exhaust systems $3000, but fully covered by Paccar. Ask the current owner or check that vin# and contact Peterbilt. I know because that was a recent truck I just got out of and bought a 389 with the isx. If you want to chat about it we can figure something out. The mirrors on the 587 have a single arm that when your going down the hwy it causes drag and pulls the top of the door down and creates a lot of wind that comes into the cab. When I had my truck I took it to a body shop to have the doors adjusted to fix that gap issue. Look at the Pete's with the split V- shaped mirror mount. It allows the air to pass through and not cause drag in the top part of the door. My bad for turning this into a story but I thought if you didn't know at least you do now.
No , that tells me something isn't going right LoL . Good job though when can I bring my Cummings over for a compressor change .
They appear to have SUPERIOR customer service.
Do you have a link for Allison’s channel?
You are so lucky you have a place to work on your truck and a place that has all the tool and lets you borrow them
Love watching your videos. Very informative. Keep up the great work driver
What’s her YT channel?
Thanks video is awesome
That part needs to be made out of brass not plastic.
First thought that came to my mind. There has to be a better designed fan clutch system.
@@DannyWalker247 its a Cummins, what do you expect, Lol
that kid knows how to do a in frame that’s awesome..
Justin great job as usual piece of mind now while on highways JUST TRUCKIN!!!!!!T&PS!!!
Even though you're helping you're still a expensive bill. But that's your money maker. It pays the bills and take care of your family B SAFE
Did y'all check the bearings in the hub I had one where the bearing heated up and fried the o ring
Giddy up, and git’r done! Another great video 👍🏻👍🏻
Those mats can be used for transporting barrels that are not strapped together. They prevent the barrels from moving. I worked on a loading dock once and we used cardboard to do the same thing. I would save them.
Thanks, I subscribed to Allison;s channel. Take care on the road. I'll be watching.
Can’t find it 😞 What’s the Channel called?
@@martinjuulandersen9694 It’s ALLISX. You have to put it in all caps or you will get someone else’s channel.
On my way to search fir Allison’s Channel! Man that Side by Side looked sic, never seen anything like that up here in Michigan. Most of the off roaring up here is on the sand dunes. Or it’s a really popular place to take off road vehicles.
I have the same exact set up 2013 vnl 670 with cm2250. Been pretty good except for Def problems
Good shop and people seem very professional . So you getting tdubs the buggy...lol
Good to have friends. 👍👍you working hard. True worker there is blood 😁😁
Justin I see WHY you have been taking your 🚛 to Alison so long when it's something that would give you problems. Knowledge is always good to get. Alison is 6'10" in knowledge ❤️
New follower. Good stuff man!
wish i had seen this. I have a 2015 pete 579 and the dang fan will come on when i stop for a few mins and wont go off the rest of the day.i have a cummins but its driving me nutty. And then today, the fan at high speed was ok, but when it switched to slower speeds its started sqreeching the belts.
Hopefully it stops giving you problems
Did you keep the old part to rebuild for backup seeing how your getting another Cummings truck?????
Just wondering why you didn't change the belts while you were there? Keep the old ones in the just in case pile.
Do they let everone work on their stuff there or just you because you know them?
Lol I see my truck in background ;-) white Volvo in first bay
What were the symptoms that your fan clutch was failing? I have an issue I think is the fan clutch leaking air… compressor cycles every couple of minutes, but only while driving, no leaks while idling, no psi loss while turned off with or without air to trailer, only while I’m driving. Fan clutch seams to operate just fine, but I can’t think of anything else that uses air ONLY while in motion. Is this something you noticed with your bad fan clutch?
If u pull air 2 air pipe on driver side and move power steer reservoir and bracket u can do job in about 3rd the time no reason to pull surge tank and shroud
What the base behind the clutch called? Is it the fan support bearing assembly? Have a video on replacing that on a 6.7 cummins? 2016 ottawa?
Awesome video 📹 👏 Mr.Just Truck'in 🚛🚚.. a lot of area to get to , switch from old part to new part , it seem easy .. Question, if you never become a Truck Driver, would you became a mechanic working on 🚚 Trucks for a living ?? I like that buggie 😍😍😍 Big tries .. I been looking for a limousine golf cart over the summer / fall last year a bit expensive, 11k to 14k ..
What the part number on fan clutch for the cummins isx? Or it take the same as the volvo engines?
If you were to do it all over again would you have bought Volvo again or just go with the Pete?
Great vid. Haggai saved to my phone.
Allison seems very knowledgeable
Thanks
Did good 👍 my friend 💘
Nice job brother you make it look easy.
Hey Justin didn't see you check the fan hub bearing assembly you have to remove the belt to check it and spin it shake it I did not and 3 weeks later the fan hub fell bearing came loose and the fan went through radiator. Its the second time I changed my fan hub the. Plastic connecctor you showed was melted so was mine the second time from the bearing failing on the hub melted that plastic connector trust me it was Expesive lesson $3500.00 with tow bill to my house and me doing the work so you doing long haul could be really costly. If it was me I would change that fan hub to only another $600.00
I do have an isx Cummins 2008 Volvo vnl and just replaced all parts for AC but still AC works only when driving highway and when I come to a stop then no AC and it starts top overheat
Fan kicking on ?
Looked like what we call a "proper job" in the UK busted knuckles and black hands. Know all about posh tools worked on aircraft for 45 years even made what I couldn't buy. Thanks for the insight.
Keep the Volvo you have enough time in it good job
My truck is brand new (less than 30k miles) and my fan clutch went in my cummins. Like seriously?!
Why did you get a rebuild kit and rebuild the old one? So is regular la or $1100?
I wonder if they could make the rubber piece out of aluminum?????or if it has to be rubber for air seal????
Sound like really good people.
Lovely little young lady with big burly man knowledge. 😎. Super cool👍🏾
Loose the borg Warner they suck. Most manufacturers have a Horton two speed option. It’s expensive but far more reliable.
I have a 2012 kenworth T660, Cummins 600hp every time the fan engages it screeches like a Banshee, do you think I can get the mechanics to change the Fan Hub, Im just about ready to quit...
Do volvos come with a cummins engine?..always thought they had a volvo engine
Mud flaps with Ksa map on?!
Good thing they take all the mud 😀
What would be the symptoms of the engine while driving with an air leak on the hub???
Good job.
God bless you.
Do the new 2022 volvos use Cummins engines?
Man I enjoy your video S
Caught before it flew apart!
We’re is this shop 😍
Griffin GA
How long did it take u to change the clutch?
Great video!!
Where is her shop at???
ALLISX 94 is her RUclips.
How many miles before it happens again???
How much it cost to rebuild Cummins engine?
I don't know where you get 1100 bucks for repair I had 2 replaced on my 2011 Volvo ISX new clutch and mechanic bill was less than 650 bucks per time you may need to find a new shop if that is what they quoted you . That is including clutch fan .
Hi I’m truck driver from UK 🇬🇧 can I work with Uk 🇬🇧 license in USA 🇺🇸 ? Thank you so much brother
Where are they located?
Griffin GA
could you not have saved some $$$$$ and just replaced the item and damaged oring that was at fault. Not sure the price of the complete clutch, or was it also damaged.
You Need to Get A
Peterbilt 579
Good job!
Man I'm wondering if that's what making boise on my cummins sound like whindin turbo going when I'm stopped then it stops idk
For me just starting out would you recommend leasing or buying a trailer?? Any money in power only loads?
lease a trailer
Great job
Do not judge a book by the coveralls!
Shop location?
Atlanta Ga south HAGGAI DIESEL
You show check “crows feet” wrenches. Open wrench heads to use with ratchet.
I actually live pretty much right in the middle of high falls and Atlanta in hampton georgia
Anybody know the name of her shop?
What's up
wow your giving up your secret.
Allison's channel -- ALLISX (caps) ruclips.net/channel/UCGQJkyvcsf_2hkN-PObmREgvideos
If those bullets on your front wheels ever tangle with a bicycle or pedestrian's legs, it will be a blood bath of horror.
That's why they're illegal on a federal level.
There are safer ways to trick out your truck.
Allison renamed her channel : search NUT-N-BUT ISX
Hi
Hey man! I just got hired at a company running regional trips. If you have some time I’d appreciate if I could ask some questions via email. What is the email you guys use for the channel?
Playing a game of bloody Knuckles?
I would love that here..lol...
Wow. You gotta know how to fix a truck to be a trucker.
What did you say her u tube channel name is ?
ALLISX ruclips.net/video/pVC2OF83r-k/видео.html
@@user54389 thank you
👍🤜🏽👍🤜🏽👍🤝