Thanks for sharing, I came across one 2017 Nissan Sentra push start today and I tried everything with 3 different programmers but no success, it bipps 3 times and the dash kips off and idea will be very helpful. Thanks much
For Altima/Maxima say 2012 or so, do you have to re-program the original and new keys for adding a key or AKL? Must put on hazard lights for all Nissan programming I guess, and all doors close?
hi friend >>> how can i know these steps after the device say ( success ), like push first control then off lab lab alb, you have any source or what , thanks
Is this fully safe on all Nissan Proximity remotes. I have heard of the XPAD bricking the ECU and car not starting even with original key. Do you think this was operator error and not using the right procedure as you have shown. Great video by the way. Very clear and concise. Cheers
Great videos, are you going to do any with that key programmer and the various accessories that comes with it. Like the eprom, or the re flashing? I have the same programmer but dont know how to use all the stuff they send with it.
We're in the same boat I don't know how to use any of the AutoProPad accessories ... Xtools has a RUclips channel ruclips.net/video/hjJoRB3Xaoo/видео.html they have 5 videos about the accessories / the videos are not very helpful!!
If only adding a key do you need to program the original key again? Sometimes my programmer says hold the first key to start button. Does that mean the original or first new key being programmed? Also At the start it says to tap start button with key. Is that the original or the new key I’m supposed to Be tapping it with?
question my friend, i have an autopropad too, why you have to turn the flashers first to program this car you doing now? 2016 nissan sentra, im still trying to learn all this, why and also when they mention what type? ok i wait for you answer
whey you did all those step at the end when you were programming both keys? does the autopropad was telling you to do? i didn't see that , you didn't have the cam showing on the screen
Hello dear brother I've a nissan sentra 2020 with a specific FCC ID: KR5TXN4 AKL. but i can't get the fob until another 4 weeks can i generate and do it with Xhorse smart key?
I have the xpad1002 it's the same thing I've been using it for more than a year now and only have issues with some Honda's 98-2000 and Fords same year. And some early Chevy's that use a circle plus.
Good evening I have a question I'm walking on 2008 Nissan Maxima and I buy the smart key for it and I don't know how to reprogram it and I do have the same scanner can you help me out to please
I found out that the difference between the Auto Pro Pad and X100 Pad 2 is that the Auto Pro Pad can do gm pin read, chrysler pin read newer system, Toyota h key and smart key reset. Nissan pin bypass key programming. Ford 128 bit Key and smart key programming.......Is that worth it or should people still get the X100 Pad 2? Are there side tools we can buy that can do the things the Auto Pro Pad can do, but not the X100 Pad 2? Your feedback is greatly appreciated.
They say it works on Ford 128 bit but it doesn't I tried 3 times A 2016 Ford edge / 2013 & 2014 Ford fusion... That's why I got rid of my AutoProPad I returned it and got a full refund thank you American Key Supply! It also sucks on the new Chrysler thumbstone proxies tried it on 4 cars got it to work Only1 time on a 2015 Chrysler 200 and it wouldn't even pull the pin... It works great on toyota H Chip takes 1 minute to program all keys lost super fast.. I use trueCode for Ford's using 128 Bit System I did A video on it it worked flawlessly I also Use the trueCode for the new Chrysler Thumbstone proxies .. And for Toyota H Chip all keys lost I use X100T.. That what I use..
I spoke with someone at Xtool and he told me they fixed the issue for Ford 128 bit chip....don't know how accurate that is though. I just purchased the X100T from yellow key supply. I never heard of True Code or seen your video, but I will check it out now.
Hey im having a problem that my steering wheel lock actuator got mess up. so i put a new one while i was doing the steps i mess up so i stop and try to do ot againg but my key fob stop working .so i call a lock smith to try to program it and he saids that is not connecting to obd2 ...im in Hartford Ct ...is there anything u can said to help me please
AutoProPad Can do Toyota H Chip all keys lost, New Ford's example :2016 Ford fusion, new Honda proximity keys & Subaru 80 bit.. I sent my AutoProPad back for a full refund I bought the x-100 pad 2 haven't used it yet AutoProPad sucks not reliable!! Don't waste your money the 100 pad 2 does almost the same thing without the heafty price tag and a ridiculous $1,000 subscription per year
Are you serious??? I was considering to purchase the AutoProPad from American Key Supply, but now I'm having second thoughts after hearing you. Are you sure the X-100 Pad 2 is reliable? Can you make a video on it? Also, is the x-100 pad 2 the best alternative or is there a better machine available now? Please let me know as I take your advice very seriously, thanks!
That's so funny i couldn't reach the 5 digit pin to day with my Aute im508 i guess i might have choosed the wrong 1. As you selected nissan infinity i just choosed nissan.
Хобби
Thank you for the video.... you are the man chris,i love how clear and simple your videos are... keep them coming
Thank you for your help. I'm a locksmith here in Brazil and I did a Sentra 2016 with your video. 🍀
Great video chris...keep them coming,thx
much better than other videos out there ...
very good job sir,thank you for your hard work.
Do you recommend x100 pad, or Pro for programming 2017 Nissan Pathfinder? THANKS! Great Video
Nicely done, from one locksmith to another.
Thanks for sharing, I came across one 2017 Nissan Sentra push start today and I tried everything with 3 different programmers but no success, it bipps 3 times and the dash kips off and idea will be very helpful. Thanks much
For Altima/Maxima say 2012 or so, do you have to re-program the original and new keys for adding a key or AKL? Must put on hazard lights for all Nissan programming I guess, and all doors close?
I’m wanting to buy the auto pro pad but I’m not sure if I want the basic or the light which one do you recommend?
For programming i need to buy new key or can i take used to ???
Is device need to pincode reader or only it can be programmed ?
Do you need the original key, I lost mine & need a new key
hi friend >>> how can i know these steps after the device say ( success ), like push first control then off lab lab alb, you have any source or what , thanks
Is this fully safe on all Nissan Proximity remotes. I have heard of the XPAD bricking the ECU and car not starting even with original key. Do you think this was operator error and not using the right procedure as you have shown. Great video by the way. Very clear and concise. Cheers
Great videos, are you going to do any with that key programmer and the various accessories that comes with it. Like the eprom, or the re flashing? I have the same programmer but dont know how to use all the stuff they send with it.
We're in the same boat I don't know how to use any of the AutoProPad accessories ...
Xtools has a RUclips channel ruclips.net/video/hjJoRB3Xaoo/видео.html they have 5 videos about the accessories / the videos are not very helpful!!
li am from iraq .....nice job you are clever
Subscribed and thumbs up.
What do you think about obdstar.x300
If only adding a key do you need to program the original key again?
Sometimes my programmer says hold the first key to start button. Does that mean the original or first new key being programmed?
Also
At the start it says to tap start button with key. Is that the original or the new key I’m supposed to
Be tapping it with?
Does it do the 20 digit pin ?
Please help me is this device fit for 18 nissan sentra or no ?
question my friend, i have an autopropad too, why you have to turn the flashers first to program this car you doing now? 2016 nissan sentra, im still trying to learn all this, why and also when they mention what type? ok i wait for you answer
Can I use the xtool d7 to program the 2016 Sentra key fob?
whey you did all those step at the end when you were programming both keys? does the autopropad was telling you to do? i didn't see that , you didn't have the cam showing on the screen
Thank you very much
You are the best
Hello dear brother I've a nissan sentra 2020 with a specific FCC ID: KR5TXN4
AKL.
but i can't get the fob until another 4 weeks can i generate and do it with Xhorse smart key?
2018 nissan kiks keys can be programmer?
Hi
Where did you get the auto pro pad
I been looking online but I only see the x100 pad 2
What’s the difference in between?
Thank you in advance
I have the xpad1002 it's the same thing I've been using it for more than a year now and only have issues with some Honda's 98-2000 and Fords same year. And some early Chevy's that use a circle plus.
how do you know this procedure?
Hi bro can it program Europe and Asia cars or only America cars
Good evening I have a question I'm walking on 2008 Nissan Maxima and I buy the smart key for it and I don't know how to reprogram it and I do have the same scanner can you help me out to please
What kind of programer are you using?
Nice sir 👍
nice thank you
EXCELLENT
I found out that the difference between the Auto Pro Pad and X100 Pad 2 is that the Auto Pro Pad can do gm pin read, chrysler pin read newer system, Toyota h key and smart key reset. Nissan pin bypass key programming. Ford 128 bit Key and smart key programming.......Is that worth it or should people still get the X100 Pad 2? Are there side tools we can buy that can do the things the Auto Pro Pad can do, but not the X100 Pad 2? Your feedback is greatly appreciated.
They say it works on Ford 128 bit but it doesn't I tried 3 times A 2016 Ford edge / 2013 & 2014 Ford fusion... That's why I got rid of my AutoProPad I returned it and got a full refund thank you American Key Supply! It also sucks on the new Chrysler thumbstone proxies tried it on 4 cars got it to work Only1 time on a 2015 Chrysler 200 and it wouldn't even pull the pin... It works great on toyota H Chip takes 1 minute to program all keys lost super fast..
I use trueCode for Ford's using 128 Bit System I did A video on it it worked flawlessly I also Use the trueCode for the new Chrysler Thumbstone proxies ..
And for Toyota H Chip all keys lost I use X100T..
That what I use..
Did you see the video I did using The trueCode On A 2016 Ford Edge (128 Bit) ?
I spoke with someone at Xtool and he told me they fixed the issue for Ford 128 bit chip....don't know how accurate that is though. I just purchased the X100T from yellow key supply. I never heard of True Code or seen your video, but I will check it out now.
May I ask for the data loss key help me, my car failed the add program please help

I have A Porsche 911 turbo 2010 Can you use this same procedure to program the keys?
No
Thank
Hey im having a problem that my steering wheel lock actuator got mess up. so i put a new one while i was doing the steps i mess up so i stop and try to do ot againg but my key fob stop working .so i call a lock smith to try to program it and he saids that is not connecting to obd2 ...im in Hartford Ct ...is there anything u can said to help me please
Sorry don’t know how to fix your problem...
maybe you have a problem with the j1939 wring or can communication wiring , you have to check all that too
@@hinojosa552 I fix all that about 2yrs a go it was my computer wasent communicating with my obd2 ..put new bcm and started working?
Hi there, what´s the difference between this tool and x-100 pad2? I´ve seen AutoPro Pad is nearly $2k which is a lot more than x-100 pad 2, thanks
Great question, I'd love to here an answer. I don't know which one to get.
AutoProPad Can do Toyota H Chip all keys lost, New Ford's example :2016 Ford fusion, new Honda proximity keys & Subaru 80 bit..
I sent my AutoProPad back for a full refund
I bought the x-100 pad 2 haven't used it yet
AutoProPad sucks not reliable!! Don't waste your money the 100 pad 2 does almost the same thing without the heafty price tag and a ridiculous $1,000 subscription per year
Are you serious??? I was considering to purchase the AutoProPad from American Key Supply, but now I'm having second thoughts after hearing you. Are you sure the X-100 Pad 2 is reliable? Can you make a video on it? Also, is the x-100 pad 2 the best alternative or is there a better machine available now? Please let me know as I take your advice very seriously, thanks!
Yes, please share your experience because I need to purchase a new programmer and have no idea which one to get.
@@calireviewer1322 What did you purchase?
That's so funny i couldn't reach the 5 digit pin to day with my Aute im508 i guess i might have choosed the wrong 1.
As you selected nissan infinity i just choosed nissan.
X-100 pad the same software you have
What's your question ?
You have to program the key part first.. and them smart key