Your video is great. Just 1 concern that I see is the horizontal weight is basically sitting on 2 bolts. It's not likely it will shear.. buuut.. supporting under the horizontal with a vertical is better. Maybe turn the bolt around, set the angle over the top and secure it to the other side. Then all the weight sits on the vertical supports? Thanks so much for sharing and helping others.
What height do you have on your columns. Going from top to bottom? The unistrut Going into the ground. And how much spacing in-between. I'm wanting to install the same setup with unistrut. But a small system like only 10x10 unistrut with 8 panels.
great job good video
Nice job like it
Your video is great. Just 1 concern that I see is the horizontal weight is basically sitting on 2 bolts. It's not likely it will shear.. buuut.. supporting under the horizontal with a vertical is better. Maybe turn the bolt around, set the angle over the top and secure it to the other side. Then all the weight sits on the vertical supports?
Thanks so much for sharing and helping others.
Thanks for sharing 👍
What height do you have on your columns. Going from top to bottom? The unistrut Going into the ground. And how much spacing in-between. I'm wanting to install the same setup with unistrut. But a small system like only 10x10 unistrut with 8 panels.
I also would like to know some spacing details. I’m very interested in installing the same type system. Thanks in advance!
There is so much information missing in these videos
Next time place a wood on top of unistrat if you gonna hummer it down ....