If this video helped you out and saved you a service fee, please feel free to SUBSCRIBE to my cause. I'd love to hit 100k subs before Im 90 years old. 😂
I’m just saying what everyone else is saying. Concise, accurate , no extra steps of cute commentary. ALL the other videos and written instructions were ambiguous or misleading. I followed your clearly shown and described steps and in literally 1 minute I had a working remote. Thank. You.
I know this video is 6 years old, but YOU ARE THE MAN. I've watched so many videos, and none of them worked. I was missing the program the remote portion. Once I did that for a red button, it worked. A thousand thanks
You were MUCH easier to understand than even the CHAMBERLAIN site! I was going in and out of the house to the garage trying to understand the instructions. I thought I'd try another RUclipsr, who speaks ENGLISH! You Done Good!
Thank you. Wish I had started here. Spent 2 hours trying to get the remote and opener connected yesterday, was ready to return the remote. Watched your video, not even to the end, and in less than 5 minutes I was up and running.
OMG I've been fighting with the supplemental remote i bought for this system for 6 months. Read the manuals watched other videos but nothing worked. Your video solved my problem in under 3 minutes. THANK YOU!!!!!!!!!
Thanks! That was SO much simpler than that truly horrible Chamberlain video (which was so busy qualifying everything that it was impossible to follow). Pretty straightforward when you get right down to it: - before you start, identify the wire/button color on the opener (purple for me) which will determine the number of presses below - put the remote in program mode by pushing its program button - press the remote button you wish to program the number of times needed (2 for purple), then press another button - on the opener, press the learn button - on the remote, press the same remote button as above (the opener light should flash) - additional remote button presses should open or close the door
Every “expert” out there did it wrong. The number of clicks based on the color of the button was key. Wish I found your video first. Would have saved so much time and frustration. Thanks !!!
Thank you! I have been getting out of car for two years. MN winters no less. Was at Home Depot and stumbled across the garage door openers. Instructions in the box were not clear. Found your channel and wa la - 2 openers programmed in 2 min. Thank you !!!🎉
This was a great help. Others failed to point out the button under the remote clip. This step was not mentioned in the owners manual of cheap remote. Thank you very kindly
Thanks for the detailed demo. I tried to follow the instructions to no avail. I think I was clicking too fast. You showed how to click, wait and click. Nice job!
Huge thanks. The garage door at my other place took 15 seconds to program. At my new place, I couldn't figure it out for the life of me. I remember it being an easy process, but didn't recall exactly what that process was. This video came through. One thing I messed up on was the color. The light was kind of a tennis ball color. I figured that as yellow, and kept trying to press one time. No luck. Then it hit me that it was green. Tried pressing 4 times, and viola!!!!
You rock man! The pre-programming setting of the remote by pressing the back button and using the chart with the color code and the amount of clicks is what I was missing.
We went through a thousand videos on how to sync the remote not one video mentioned the little button on the back of the remote really appreciate the video like subscribe to your Channel looking forward to more videos and your video should be put it number one on the algorithm
Thanks for the comment Christopher! I'm not sure why Google don't put most of my helpful videos at the top of the algorithm. I really try to have a relevant title and tags. I need to figure out how to do better at getting my video's at the top.
I couldn't have done this without your video. I am almost in tears. It's very hot here in California and I was getting frustrated. God bless you. Have a wonderful day
Thank you so much for this video! I couldn't figure it out how to program my remote, even after looking at the video on their website, but your instructions were so simple, and it worked the first time!
Thank you for helping the remote program of a garage door opener with a chamberlain or lift master. When I talking out of the clip a remote and I using the clip push down a remotes it on the light red, then I push the button color of a different with the machine and I click the remote but it’s flash by itself and sound the machines Garage door opener. I press remote again went it goes running the garage door open and close. Because I think it’s very easy for remote programming.
Wow - I just ordered this for my new car that does not have Homelink built in. I previously ordered the wrong remote due to the PURPLE button being so faded that I thought it might be ORANGE/BROWN, and that clicker did not work (since it was for ORANGE). I found out that the wire hanging down is the same color as the Learn button, and it is PURPLE. I hope this new 953EV remote works and is as easy as you showed. Crossing fingers. Subbed and Liked. Thanks.
@@garagedoorgenius Woohoo - got the new remote today, and after missing a step 3-4 times, I finally managed to get ALL the steps that you told me to do. Thanks for your help.
Dude you were better than the video, which was the same as my instructions. No way in hell that button was purple, but I read your post - and damn if there wasn't a purple wire hanging down. Bingo! thanks brother.
Dude! Thank you! This was so much easier than the manual and other videos. So simple! I almost gave up! Been having this for days and couldn't figure it out! Omg! Thank you so much.
Thank you so much! I had no idea💡 the instructions meant the square ⬜ red button. This was not the 1st or 2nd remote I've programmed, so... 🙄 I've learned my lesson and in my garage pamphlet drew a square red button to push 3x, because it's too hawt (Mississippi 🔥) to play around in any garage. I appreciate your simple step by step directions.
I agree. My opener has the purple button. In the past the directions on the back of my Chamberlin Garage Opener worked fine. My new opener required the button under the clip to be pressed as demonstrated in the video but the instructions on the open don't mention it. Very happy to be educated by this video. I was going to return the remote and I am, sure the remote instructions would show it but I have programmed remotes for relatives and house guests for years the old way. I didn't read or keep the remote instructions (my fault) The directions in the video worked perfect. Thank you Garage Door Genius.
Holy cow… I am so glad I found your RUclips channel… As easy as it seems I skipped a step every time I tried it before I watched your video… One more time after the video and it is sat... thank you very much
Thanks for this video. I couldn’t get it to work at first because I interpreted the red button on the opener as the corresponding color, so had pressed 3 times to program instead of two for purple.
Thank you for this!! Now I can get into my new house when locked out. The Chamberlain video was horrid! Didn’t help at all. It didn’t even tell me to push the button on the back of the opener w clip. Thanks again.
Is it possible to program a Chamberlin 3 button remote by using an opener you already have to a gate? The gate remote is an older style with the Dip Switches in it… I have one button already set for a garage door, however, I’d like to set the last two buttons for two gates we use. Great videos by the way, very helpful.
Hey Brian thanks for the comment! Unfortunately you can't program your remaining 2 buttons to the gate remote. If it was a Genie universal remote you could. They have a CLONE feature. Does your vehicle have the built in HomeLink? You could program that to accomplish what you want.
Thank you Mr. Genius. I watch the 2:20 video which I assume was provided by the garage door opener manufacturer. At least it was identified as ChamberlainDIY. You know the one I mean. I watched it several times, but learned nothing. I watched your video once, executed the steps in sequence and everything worked. Just like you said it would. The company ought to hire you to write and record their DIY material. Thanks.
Hi, thanks for your video.I have three remote for my 3 cars. After I set up the first one, when I test it working great.Somehow when I set up on the second one then the other one stopped working even I already tested it work before I set up the second one?. What I have to do to set up the orther?
While doing some electrical work in my Garage I disconnected the Garage door opener from the outlet. After I was done I plugged the wire of the opener back into the outlet. I just recently purchased a Chamberlain 953EV-P2 & programmed the remote 2 days earlier which worked fine. Now all of a sudden the remote does not work. I tried several times to re-program the remote exactly like I did days earlier but for some reason the remote is not responding. Is there something I am not aware of or doing incorrectly? Thank you for your attention to this matter. William.
thank you much..was doing instructions it said nothing about center button..gave up after 1.5 hrs watched your vedio had it programed less than 10 min..thank you
THANK YOU SOOO MUCH! I’ve watched a lot of tutorials but yours was the only one that worked. Had no idea there was a button on the back you pressed. The original instructions didn’t mention any of that. Thank you 👏😎
I have a purple model, and I went through all the steps, and got the unit to flash the light on the first press, and on the second press, it open the door. All subsequent presses did nothing. So I am pairing it successfully, but as soon as I’m done, it’s not working at all and it’s back to the button on the wall. Any idea why that would happen?
I have the Chamberlain unit has worked perfectly till I screwed up somehow when the door was opening half way. I will try to follow instructions to program remote again. Can not do it the Light on unit keep blinking remote does not open door, will let you know my experience.
You are a pure genius!! My color was yellow 💛 and I was able to program my husband's remote because you showed the chart. Thank you so much. P.S. Chamberlain needs to delete their video.
Then how do you program the second garage door opener to the smaller button on the remote? I was waiting for that next step but then the video ended.... thanks
Omg please I need ur help I watched ur video twice and I kno I’m doin it right!! My only problem is after I program it and press the remote button it only works one time after that nothing happens no light clicking or anything please reply and help thanx!!
After you press the remote once after programming, the LED on the remote doesn't flash or blink? The reason I ask is that I've had remotes where the battery signal is so weak it triggers the opener once, but not enough juice to do it again. If you haven't changed the battery I would try that. Especially if you've done step by step and can get it to work at least once.
If this video helped you out and saved you a service fee, please feel free to SUBSCRIBE to my cause.
I'd love to hit 100k subs before Im 90 years old. 😂
I’m just saying what everyone else is saying. Concise, accurate , no extra steps of cute commentary. ALL the other videos and written instructions were ambiguous or misleading.
I followed your clearly shown and described steps and in literally 1 minute I had a working remote.
Thank. You.
@@StevenBanks123 thank you for the feedback! This comment really made my otherwise crappy evening into one that has me smiling. 🙏🏼
I know this video is 6 years old, but YOU ARE THE MAN. I've watched so many videos, and none of them worked. I was missing the program the remote portion. Once I did that for a red button, it worked. A thousand thanks
The video is an oldie but a goodie still in 2024!
I really appreciate the awesome feedback.
This guy did a great job. I programmed two remotes in less than a minute. There was no fluff, right to the point.
@@R4829-m1n thank you for the awesome feedback! I really appreciate it 🙏🏼.
You were MUCH easier to understand than even the CHAMBERLAIN site! I was going in and out of the house to the garage trying to understand the instructions. I thought I'd try another RUclipsr, who speaks ENGLISH! You Done Good!
Thank you Susan!
Thank you. Wish I had started here. Spent 2 hours trying to get the remote and opener connected yesterday, was ready to return the remote. Watched your video, not even to the end, and in less than 5 minutes I was up and running.
@@lisatrace4123 that's awesome! Thanks for the comment 🙂.
OMG I've been fighting with the supplemental remote i bought for this system for 6 months. Read the manuals watched other videos but nothing worked. Your video solved my problem in under 3 minutes. THANK YOU!!!!!!!!!
That's awesome! Thanks for the feedback. I wish you could have found my video sooner. 👍🏼
Thanks! That was SO much simpler than that truly horrible Chamberlain video (which was so busy qualifying everything that it was impossible to follow). Pretty straightforward when you get right down to it:
- before you start, identify the wire/button color on the opener (purple for me) which will determine the number of presses below
- put the remote in program mode by pushing its program button
- press the remote button you wish to program the number of times needed (2 for purple), then press another button
- on the opener, press the learn button
- on the remote, press the same remote button as above (the opener light should flash)
- additional remote button presses should open or close the door
Thanks for the positive feedback Mark. I try to make these videos as easy as possible to follow.
Every “expert” out there did it wrong. The number of clicks based on the color of the button was key.
Wish I found your video first. Would have saved so much time and frustration.
Thanks !!!
Thank you! I have been getting out of car for two years. MN winters no less. Was at Home Depot and stumbled across the garage door openers. Instructions in the box were not clear. Found your channel and wa la - 2 openers programmed in 2 min. Thank you !!!🎉
That's awesome! 👍🏼💯
This was a great help. Others failed to point out the button under the remote clip. This step was not mentioned in the owners manual of cheap remote. Thank you very kindly
@@gregcabral201 I'm glad I could make the programming process make sense and work!
Thank you for the awesome feedback ☺️.
Thanks for the detailed demo. I tried to follow the instructions to no avail. I think I was clicking too fast. You showed how to click, wait and click. Nice job!
I appreciate the positive feedback! 🙏
Huge thanks. The garage door at my other place took 15 seconds to program. At my new place, I couldn't figure it out for the life of me. I remember it being an easy process, but didn't recall exactly what that process was. This video came through. One thing I messed up on was the color. The light was kind of a tennis ball color. I figured that as yellow, and kept trying to press one time. No luck. Then it hit me that it was green. Tried pressing 4 times, and viola!!!!
I'm glad the video helped you out! Thank you for the awesome comment I really appreciate it. 🙏🔥🤘🏼
You rock man! The pre-programming setting of the remote by pressing the back button and using the chart with the color code and the amount of clicks is what I was missing.
Thanks bruh! 💯
Thank you very much! It’s quick and easy…disconnected the remote to connect the garage door to my car…now had to switch back to remote!
i am now a runner up master of garage remotes, all grand thanks to you!
You're very welcome 🙏.
Thanks for watching!👍🏼
We went through a thousand videos on how to sync the remote not one video mentioned the little button on the back of the remote really appreciate the video like subscribe to your Channel looking forward to more videos and your video should be put it number one on the algorithm
Thanks for the comment Christopher!
I'm not sure why Google don't put most of my helpful videos at the top of the algorithm. I really try to have a relevant title and tags. I need to figure out how to do better at getting my video's at the top.
After the 3 minute video, I was able to program the remote in n 30 seconds. Took longer to park the car in the garage than program the remote. Thanks!
You're very welcome!! 🙏
I couldn't have done this without your video. I am almost in tears. It's very hot here in California and I was getting frustrated. God bless you. Have a wonderful day
I live to make someone's day! Glad I could help you get unfrustrated. Stay safe out there 🙏.
The most helpful and easy to follow tutorial ever!!! Took me less than 5 mins to do. Thank youuuu!
Glad to help! Thanks for the comment.
This is super helpful. I've tried to figure out the remote for more than 6 months until I saw this video
💯❤️
God Bless- thank you! You saved me on a day I had zero patience left!
Glad to help! 🙂
Thank you so so much! My issue was the light bulb was out. I changed it, followed your instructions and it worked no problem!
🙏
Excellent, I'll give it a try tomorrow. Thank you for taking the time to help me out. You just got a new sub, thank you again.
Anytime my friend! Good luck, you got this. 👊🏼
Thank you so much for this video! I couldn't figure it out how to program my remote, even after looking at the video on their website, but your instructions were so simple, and it worked the first time!
Thanks for the comment! I really appreciate it. Glad to help.
Thank you for helping the remote program of a garage door opener with a chamberlain or lift master. When I talking out of the clip a remote and I using the clip push down a remotes it on the light red, then I push the button color of a different with the machine and I click the remote but it’s flash by itself and sound the machines Garage door opener. I press remote again went it goes running the garage door open and close. Because I think it’s very easy for remote programming.
Awesome. Try your best a remote the program or using the keypad code too.
Wow - I just ordered this for my new car that does not have Homelink built in. I previously ordered the wrong remote due to the PURPLE button being so faded that I thought it might be ORANGE/BROWN, and that clicker did not work (since it was for ORANGE). I found out that the wire hanging down is the same color as the Learn button, and it is PURPLE. I hope this new 953EV remote works and is as easy as you showed. Crossing fingers. Subbed and Liked. Thanks.
Thank you for the sub and like!
Good luck programming. You got this. 🙏👊🏼
@@garagedoorgenius Woohoo - got the new remote today, and after missing a step 3-4 times, I finally managed to get ALL the steps that you told me to do. Thanks for your help.
@@StreakingTiger that's awesome BROH!!
Thanks for watching the video. I appreciate it! 🤘🏼
Dude you were better than the video, which was the same as my instructions. No way in hell that button was purple, but I read your post - and damn if there wasn't a purple wire hanging down. Bingo! thanks brother.
Great job...right to the point about first setting the remote button before getting started...thanks.
Life saver dude thank you!! Unreal it says nothing about programming the remote before you pair it to the opener
@@The-808 I appreciate the comment bud! 👍🏼 I'm glad the video helped.
I tried all the other tutorial here in youtube and yours works the best and very clear step by step instruction and info. Thank you! You’re the best!
Glad to help, Fely! 🙏
Not even close to what the manufacturer said to do, but 1000% correct! Thank you so much!
Glad to help! 🙏
I guess I just can't read instructions. I was so confused by the learn button mentioned...and you cleared it up!
Glad to help you my friend! 👊🏼💯
The instructions that came in the box are useless. Thank you for this video!
I'm so glad the video helped! Thanks for the comment.
Dude! Thank you! This was so much easier than the manual and other videos. So simple! I almost gave up! Been having this for days and couldn't figure it out! Omg! Thank you so much.
Glad the video helped out! 💯🤘🏼🔥
I am by far an idiot for these things but this video should be in all manuals. Thank you thank you
I appreciate the awesome feedback! 👍🏼
Your video was much more helpful than the official chamberlain video, good job 👍
Thanks for the comment! 🙏
Saved my ass man I was reading instructions and thought they meant the dam LED light color so I was programming the clicker incorrectly thanks man
You're welcome bud! 👍🏼
By far the easiest DIY video! Thank you so much 😊
Glad to help!
Couldn’t be explain better than you did. Simplest.. Thanks for posting it
I appreciate the positive feedback! Thank you.
Thank you so much I was watch others videos and almost gave up😩 urs was right on time
Glad to help! 🙏
Thank you so much! I had no idea💡 the instructions meant the square ⬜ red button.
This was not the 1st or 2nd remote I've programmed, so... 🙄
I've learned my lesson and in my garage pamphlet drew a square red button to push 3x, because it's too hawt (Mississippi 🔥) to play around in any garage.
I appreciate your simple step by step directions.
You're welcome! Glad to help. Stay cool in Mississippi. That's a different kinda hot from Texas.
I agree. My opener has the purple button. In the past the directions on the back of my Chamberlin Garage Opener worked fine. My new opener required the button under the clip to be pressed as demonstrated in the video but the instructions on the open don't mention it. Very happy to be educated by this video. I was going to return the remote and I am, sure the remote instructions would show it but I have programmed remotes for relatives and house guests for years the old way. I didn't read or keep the remote instructions (my fault) The directions in the video worked perfect. Thank you Garage Door Genius.
@@dalediersing7335 I appreciate the positive feedback!
Thank you so much this was so much easier than the chamberlain tutorial video, follows the steps with you and had it going in seconds!
No kidding!
Holy cow… I am so glad I found your RUclips channel… As easy as it seems I skipped a step every time I tried it before I watched your video… One more time after the video and it is sat... thank you very much
You're welcome Chad. Thanks for watching 😊!
You saved me a good chunk of time. Thank you! 👍🏽
@@carlosbedoyaortiz5792 glad to help! 👊🏼
The best video on program garage openers.
@@Betterbeing45 I really appreciate the kind feedback! 🤗
Great information! Just what I needed to add my opener!
@@PaulEM53 awesome! I really appreciate the comment. 🤗
Wayyyyyyy easier than the chamberlain video. Thank you!!
🙏
Thanks for this video. I couldn’t get it to work at first because I interpreted the red button on the opener as the corresponding color, so had pressed 3 times to program instead of two for purple.
Glad to help 🙂!
Great video, I was confused and your video cleared up my questions
Glad to help! Thanks for the comment. 👍🏼
Steve thank you for the donation! That's very nice of you. 🙏🏼
Good video. Easy to understand. Good job.
@@grace2u238 thank you for the comment! 😊
Thank you for this!! Now I can get into my new house when locked out.
The Chamberlain video was horrid! Didn’t help at all. It didn’t even tell me to push the button on the back of the opener w clip.
Thanks again.
🙏
Good video, got mine programmed in instantly compared to other videos I was watching 👌
I appreciate the positive feedback! 🙏
Thank you soooo much for your video! You made it so easy compared to other videos
I really appreciate the positive feedback 🙏.
Excellent step by step guidance ! Thank you so much
🙏
Is it possible to program a Chamberlin 3 button remote by using an opener you already have to a gate?
The gate remote is an older style with the Dip Switches in it…
I have one button already set for a garage door, however, I’d like to set the last two buttons for two gates we use.
Great videos by the way, very helpful.
Hey Brian thanks for the comment!
Unfortunately you can't program your remaining 2 buttons to the gate remote. If it was a Genie universal remote you could. They have a CLONE feature.
Does your vehicle have the built in HomeLink? You could program that to accomplish what you want.
Thank you for the first step!!!! That’s what we were missing.
You're welcome 😊
Oh man! Thanks very much for the great video! You save me a ton of frustration!
Glad to help, Tom!
Thank you so much for the video! Clear and concise information
I appreciate the awesome feedback!
Thank you Mr. Genius. I watch the 2:20 video which I assume was provided by the garage door opener manufacturer. At least it was identified as ChamberlainDIY. You know the one I mean. I watched it several times, but learned nothing. I watched your video once, executed the steps in sequence and everything worked. Just like you said it would. The company ought to hire you to write and record their DIY material. Thanks.
You're very welcome!
Thanks for the kind words.
Thank you so much for making it look so easy, I will try this. Thanks!!!
You're welcome! Good luck, you got this. 👊🏼
Very helpful my guy!! Now have enough enough openers for everyone per door
🙏
Awesome video. Thank you so much for uploading this. Made the job quick and easy!!!
I appreciate the positive feedback! 🙏
Glad to help, Christopher.
Exactly what I needed. Thanks
Glad to help! 👍🏼
Best video so far
Thanks 🙏🏼!
Thank you Garage Door Genius for the video. Very helpful.
You're welcome!
You are the best all other videos were so unclear.
Thanks!
Thanks so much for this wonderful tutorial video. It was so easy to follow! Really appreciate it!
You're welcome 😊!
Took 5 mins. Exactly what I needed lol. Thanks!
You're welcome 😀!
THis is why I love this country. for people like you ;)
BuyCryptoPig
Awe thanks man!
You're welcome!!
Thank you. You saved my day!
Thank you sooo soo much finally able to get it set up and you explain it so easy now for the other remote.
Hi, thanks for your video.I have three remote for my 3 cars. After I set up the first one, when I test it working great.Somehow when I set up on the second one then the other one stopped working even I already tested it work before I set up the second one?. What I have to do to set up the orther?
While doing some electrical work in my Garage I disconnected the Garage door opener from the outlet. After I was done I plugged the wire of the opener back into the outlet. I just recently purchased a Chamberlain 953EV-P2 & programmed the remote 2 days earlier which worked fine. Now all of a sudden the remote does not work. I tried several times to re-program the remote exactly like I did days earlier but for some reason the remote is not responding. Is there something I am not aware of or doing incorrectly? Thank you for your attention to this matter. William.
William have you changed the battery in it? A weak battery = weak signal.
Awesome work in seconds
Thank you for the comment!
Worked like a charm and saved some money, thank you
You're welcome 😀!
Thank God for your video. I must have watched like 6 videos and they skip the the first step. 🤦🏾♂️
I like to be nice and thorough! I really appreciate the feedback. Thanks for watching. 👍🏼🔥
Much easier than the company video!
Thank you for the comment!
thank you much..was doing instructions it said nothing about center button..gave up after 1.5 hrs watched your vedio had it programed less than 10 min..thank you
@@Sandy-pt4nl I really appreciate the awesome feedback!
I'm not sure why those instructions are made to not work.
THANK YOU SOOO MUCH! I’ve watched a lot of tutorials but yours was the only one that worked. Had no idea there was a button on the back you pressed. The original instructions didn’t mention any of that. Thank you 👏😎
You're very welcome 🙂!
Very quick and simple. Thank you
Thanks for the video. The wallet card instructions I got with my new openers was terrible.
Great tutorial. I was able to program easily after watching. Thanks!!
You're welcome!
Thanks for watching.
I have a purple model, and I went through all the steps, and got the unit to flash the light on the first press, and on the second press, it open the door. All subsequent presses did nothing. So I am pairing it successfully, but as soon as I’m done, it’s not working at all and it’s back to the button on the wall. Any idea why that would happen?
I appreciate you sharing your wisdom my friend. God Bless! 😎👍
😎🙏
easy, peasy. Thank You.
You're very welcome! Thanks for the awesome feedback. 👍🏼
Y made mu day thank u i love smart people like you
🙏
Im just wondering why the remote has 3 buttons if you’re only gonna use one? I have this same remote but the other two buttons dont do anything
Some people have 2 car or 3 car garages.
Thank goodness I found this! Great explanation.
Thanks for watching 😊!
Hell yeah thanks i programmed my controller first try!
@@Ecobeast559 BOOYA!! That's awesome bruv! 👊🏼
Thanks for the comment.
Best video I came across for programming the remote. very clear and easy
Andrew Warnes
I appreciate it!! Thanks!!
I have the Chamberlain unit has worked perfectly till I screwed up somehow when the door was opening half way. I will try to follow instructions to program remote again. Can not do it the Light on unit keep blinking remote does not open door, will let you know my experience.
10 blinks from the unit means safety sensors. Make sure they are lined up.
You are a pure genius!! My color was yellow 💛 and I was able to program my husband's remote because you showed the chart. Thank you so much. P.S. Chamberlain needs to delete their video.
Excellent! great video, I got the remote working! THANKS!!
🔥🔥 AWESOMENESS 🔥🔥
My light didn't blink at all so what do you do then? Yours worked on the 1st try.
Which light? On the opener?
Thanks for your video, helped me a lot.
Glad to help! 🙏
Then how do you program the second garage door opener to the smaller button on the remote? I was waiting for that next step but then the video ended.... thanks
It's the exact same process. Except you use a different button on the remote. 👍🏼
Very helpful. Thank you.
@@MicheleOwens-kj9lo your welcome!
Omg please I need ur help I watched ur video twice and I kno I’m doin it right!! My only problem is after I program it and press the remote button it only works one time after that nothing happens no light clicking or anything please reply and help thanx!!
After you press the remote once after programming, the LED on the remote doesn't flash or blink?
The reason I ask is that I've had remotes where the battery signal is so weak it triggers the opener once, but not enough juice to do it again. If you haven't changed the battery I would try that. Especially if you've done step by step and can get it to work at least once.
Absolutely perfect thanks for the help 👍
You're very welcome!
Your instructions are very exact! Thank you!
Thanks for the positive feedback! 👍🏼
Sweet!!! Best video for this!
Thanks!