I had a lot of fun with my reg Timber in the snow with floats on.. When you live in WI , you take what you get. I would love to have this version as well. Great flying Ali !
I really love these “On The Fly” video series. Ali is a such a cut up! Awesome and fun videos - yes you always represent the products, but in a way that’s fun and entertaining!
Mainly I fly and enjoy the warbirds but I got a timber when it came out and I fly it more than any other plane. I just got the turbo timber today and taking it out tomorrow if the wisconsin weather permits
Great video! These guys have a lot of fun doing them. Makes them more enjoyable to watch. Thanks guys. Waiting for the next. Love the plane. I have the regular, haven't flown it yet. I put carbon fiber rods through out the plane, wings, tail and nose.
Mine is due in tomorrow. Going to use the floats on the EC-1500 . Actually work very well off the grass. Full Flaps , Full back Elevator , GO! Have done the same way on the original Timber. Arrgh. Capt Mrgn.
Great video! I got one also now and I am very pleased. Practicing with no-Safe and skills are improving quickly. Looking forward to STOL on water soon!
I own one, and I have a question. How can I center the ailerons? Is the screw that adjustes the aileron rod in with the servo behind that plastic door on the wing? Or where should I adjust it? Can I even center it without triming?
Ahoy to all . It arrived and in process of putting it together. Very Nice Bird . Seriously this is Sweet. Engineering a quicker way to swap from wheels to the Floats. Yet , they are due to go on the EC-1500. Well , going to mount an FPV on the Nose. Have a Great Night and Keep them Flying. Capt Robert.
hi everyone NEED HELP !! I have a Turbo timber 1.5 Blue the first edition, my battery is Tattu 2700 mAh 3 cell 11.1V, Radio is specktrum NX6. kinda new to this binding stuff. The problem is that the plane flies like a gentle lady at full throttle, barely able to keep it in the air which is quite frustrating hence the term Turbo does not apply at all here. Reading the manual seems to point to a binding problem. My next ques. Are there two ways to bind my plan? I know about safe mode binding...kinda. will binding in safe mode (if there is such a thing) stop the motor from having full throttle? If so, it shouldn't. this should be a user decision hence throttling down! not something controlled by the radio. Also If the latter is true then how do i bind the plane so that i get full throttle. Thanks for any help or advice given. 👍😊
Hi all, well this was the video that that did it, I just received my Turbo. But I do have one question, I’ve asked others but I have received no reply, I’m hoping you or someone can help me on this. This is my first plane so this may be a stupid question. While inspecting the fuselage I noticed that while the rudder was flush even with the vert. stab. the servo arm was not centered. I thought that when control surfaces are in their center position, the servo arm should also be centered. If you could help me on this I’d appreciate it. Thanks.
Greatttt video! You convinced me! After my UMX Timber I love, my next one will be this Turbo Timber! A question: I used my UMX Timber on snow with floaters with great success. Could I do the same with the Turbo Timber without modifications to the floaters? Or shoud I remove the floater's rudders, or something else? Thanks again for sharing this nice video. Waiting for your answer!
Great Video Guys, my brother has one of these Turbo Timbers and he's really enjoying it. My question is on recording this video. How did you get such smooth chase video? Incredible! Flite Test does the same thing but yours is 10 X better. Any behind the scenes footage? How about a video on how to do that.
I think you guys need to do more videos like this with the laid back chill vibe. Fun. Very appealing.
I had a lot of fun with my reg Timber in the snow with floats on.. When you live in WI , you take what you get. I would love to have this version as well.
Great flying Ali !
Thanks for the idea. Gonna have to try that on my turbo timber when we get some snow here in PA.
@@jimhimesjr just make sure it's powdered snow Jim...
I'm looking forward to my maiden.... I love my regular Timber but it was a must to own the Turbo Timber as well...
Great job!
I really love these “On The Fly” video series. Ali is a such a cut up! Awesome and fun videos - yes you always represent the products, but in a way that’s fun and entertaining!
Ali's enthusiasm sells it well!
Great video of the Turbo! Incredible in-flight shots from drone. Very entertaining. Mine arrived yesterday. Can’t wait.
Mainly I fly and enjoy the warbirds but I got a timber when it came out and I fly it more than any other plane. I just got the turbo timber today and taking it out tomorrow if the wisconsin weather permits
Love the Turbo Timber have two for myself . Amazing Aircraft!
Thanks HH for the Turbo Timber!
Great video! These guys have a lot of fun doing them. Makes them more enjoyable to watch. Thanks guys. Waiting for the next. Love the plane. I have the regular, haven't flown it yet. I put carbon fiber rods through out the plane, wings, tail and nose.
Wow, talk about overpowered! I love it!
Mine is due in tomorrow. Going to use the floats on the EC-1500 . Actually work very well off the grass. Full Flaps , Full back Elevator , GO!
Have done the same way on the original Timber.
Arrgh. Capt Mrgn.
Great job guys. Cool looking plane
I have already gotten mine and i have only flown it on 3s and i already love it
That is so funny. Easy flight!
just got one. I love it. its a pleasure to fly!
For Timber floats on snow, any need to apply slippery tape to float bottoms ?
Great video! I got one also now and I am very pleased. Practicing with no-Safe and skills are improving quickly. Looking forward to STOL on water soon!
From the mud to the stars.....at 1:30...thanks so much.
I own one, and I have a question. How can I center the ailerons? Is the screw that adjustes the aileron rod in with the servo behind that plastic door on the wing? Or where should I adjust it? Can I even center it without triming?
Beautiful plane. 👍
Ahoy to all . It arrived and in process of putting it together. Very Nice Bird . Seriously this is Sweet. Engineering a quicker way to swap from wheels to the Floats. Yet , they are due to go on the EC-1500.
Well , going to mount an FPV on the Nose.
Have a Great Night and Keep them Flying. Capt Robert.
hi everyone NEED HELP !! I have a Turbo timber 1.5 Blue the first edition, my battery is Tattu 2700 mAh 3 cell 11.1V, Radio is specktrum NX6. kinda new to this binding stuff. The problem is that the plane flies like a gentle lady at full throttle, barely able to keep it in the air which is quite frustrating hence the term Turbo does not apply at all here. Reading the manual seems to point to a binding problem. My next ques. Are there two ways to bind my plan? I know about safe mode binding...kinda. will binding in safe mode (if there is such a thing) stop the motor from having full throttle? If so, it shouldn't. this should be a user decision hence throttling down! not something controlled by the radio. Also If the latter is true then how do i bind the plane so that i get full throttle. Thanks for any help or advice given. 👍😊
There's a blooper reel?........
Beautiful plane.
5:31, bottom right: Next gen iX Spektrum Radio? iX20 maybe? That would be cool!
I love my turbo timber! I haven't found anything it can't do (yet)...
Can it hover?
Quite probably, but If hovering is your thing, get the timber X 1.2 ......
@@chanceym6000 yes it can hover.
I just wanted to know to get a good idea of its power/weight
Love on the fly! keep em coming
That is some piece of flying foam!
Cool video. Fun to watch. Thanks for sharing👏
Hi all, well this was the video that that did it, I just received my Turbo. But I do have one question, I’ve asked others but I have received no reply, I’m hoping you or someone can help me on this. This is my first plane so this may be a stupid question. While inspecting the fuselage I noticed that while the rudder was flush even with the vert. stab. the servo arm was not centered. I thought that when control surfaces are in their center position, the servo arm should also be centered. If you could help me on this I’d appreciate it. Thanks.
Good day .Guys grate video my turbo just arrived wats the feeling with the Wing slats on or off ? Cheers
Greatttt video! You convinced me! After my UMX Timber I love, my next one will be this Turbo Timber!
A question: I used my UMX Timber on snow with floaters with great success. Could I do the same with the Turbo Timber without modifications to the floaters? Or shoud I remove the floater's rudders, or something else?
Thanks again for sharing this nice video. Waiting for your answer!
Would be cool if you could use reverse thrust in it since it theoretically would have reverse thrust since it’s a turboprop
Great video
Does this plane have. Beginner. Mode?
Boy I'm torn x or turbo
cool video
The thing actually took off in less that 4 feet
👍👍👍👍👍👍👍👍👍
Duh, THIS is why I have 4 of them!🤣
Woow Nice
Looks like a fun plane to fly ^^d
Yes sure Ali is going home to play with the timber. Have you seen the Jets he has.
No matter how much you have in the hobby, there is always more fun to have with something else!
Boom!! Well said Ali well said.
@@horizonhobby so true!
Great Video Guys, my brother has one of these Turbo Timbers and he's really enjoying it. My question is on recording this video. How did you get such smooth chase video? Incredible! Flite Test does the same thing but yours is 10 X better. Any behind the scenes footage? How about a video on how to do that.
Practice.
A good eye for photogenic scenes and lots of practice....good communication with the pilot flying helps too.
Umx timber x .. and turbo timber umx....with floats as well please...
the camera work my me dizzy sorry!
I got one it’s too good
me dumped the floats in the bin
Specialized 29er why lol
;)