have been using the dso tc2 for some time now , it works ok but it can measure an input voltage up to only 16volt, but the dso tc3 really upgraded that issue .
Congratulations on the super complete DSO-TC3 Review. I purchased this device, however, as soon as it arrived, I realized that the device incorrectly measured some components informing capacitor instead of register and so on. Plus it wasn't calibrating either. Anyway, what could be the origin of this problem? See, firmware updated to the latest. Thank you in advance for your work and if possible, please clarify this doubt.
Hi, sorry to hear that. A new firmware update might help. Please join the FNIRIS whatsapp support group and expose that problem to them. They're a quite responsive and probably will figure out a solution. Thanks for watching,
I have to ask. Which is better the DSO-T3 or the Zeeweii DSO154? Or better yet, what is the best Budget 3-in-1 oscilloscope? I can get both of these for similar prices $50-60 but I just need one oscilloscope as a beginner. What would you get ?
Hello Terence, if you JUST want the oscilloscope, go to the Zeewei, it has a function generator also and it goes up to 18Mhz, it will allow you to handle for example the clock of arduino (16Mhz). If you want something more complete with also a component tester, DSO-TC3 is a good option. The oscilloscope is very limited, much more than the DSO154, but you a lot of other function delivered. Bottom line, it depends on you final objective. Hope it helped and thanks for watching!
I buyed the dso120 because i saw your video, now ..can you use a protoboard AND test a cristal 200 mhz? If you do note have a signal generator, maje a full test
Hello! I have here several crystal to create a board in a project to test up to 350Mhz, unfortunetally didn't had the time yet to make it happen. Thanks for watching!
Great video thanks! My issues are when i short the 3 wires to calibrate mine it doesn't recognize it and does nothing. Also it doesn't let me use the generator on the oscilloscope to do that calibration either. Please help!
Hi, thanks for watching, if this is not working properly, you should contact FNIRSI, they will help. Just enter the FNIRSI whatsapp support group as ask there for help.
Hi Tron, there's plenty in Aliexpress. It really seems they make an effort this time. For me the only thing missing is a little more juice in the analog bandwith of the oscilloscope, but I get it, it is made to be cheap, so... thanks for watching!
Nice bit of kit, you should also know you can upgrade the firmware, the only odd thing is on the website you can't down load it for some reason but other youtube's have provided access to the the firmware for version 3
Hi, the website is not working correctly, if you got to the whatsapp channel and ask for it, they will provide you a Google drive link with all the info on all the devices. Thanks for watching!
Hi, it doesn't have the BNC connectors, but has MCX that will allow you to use a MCX to BNC adapter. I would buy for sure a set of probes. Regarding the DSO, you can't save the waveform as you do on some digital oscilloscopes. Thanks for watching.
Olá Sérgio, faz tanto tempo 😁 espero que esteja tudo bem contigo! Desculpa não ter conseguido voltar ao vídeos em português, mas já luto para conseguir fazer um vídeo por semana em inglês. Obrigado por assistires e tudo de bom!
Hi, im looking for a budget oscilloscope for a vintage stereo amplifier repair and restoration project. Is this recommended and suitable or should i get a better one? Thanks.
Hi, if you don't need bandwidths over 200Khz, this one would work. If you need something over that, you should consider the FNIRSI that wll be released this month or even a Zeeweii. Thanks for watching!
Great review. I thinking about ordering one of these , But Im curious 1) is there a way to set the test frequency for inductor testing if so what frequency options does it have? 2) does it display the Q factor of inductors or does it require manually calculating the Q factor?
Parabéns pelo Review do equipamento. Estou escrevendo em português porque descobri nos comentários que é brasileiro 😃. 👏👏👏. Você pagou alguma taxa ou passou ileso pelos famintos por imposto? Um abraço
Olá Franco, na realidade sou Português. Hoje em dia para importar pago sempre taxa, é uma politica da união europeia mas tenho vários amigos youtubers do Brasil, o Daniel do canal @EletronicaeTecnologia, o Ronivon do @SERTECMANUTENCAO, a Juliana do @ju_lab entre outros e o que tenho ouvido é que está mau nas encomendas que vem do exterior, o imposto é muito alto. Alguns ainda conseguem alguns produtos que passem sem imposto, mas acho que está cada vez mais raro. Um abraço e obrigado por assistires.
Hi, I bought this device without a probe, can I still use it to test my car amp for clipping, the amp outputs 500watts 30volts, it's a car audio amplifier. Thanks. I've never used a oscope before.
Hi Jonhy, you should. Without the probe you can test only up to 40V, I'm not sure if it is Vpp but I think it is. The probe is extremelly cheap, is always good to have one, but please veritfy in the manual if what I told you is right. Thanks for watching!
@@TechCornerTVthe amp output at 2ohms is 30volts so it should be ok, I'll order a probe, I live very remote takes 3 weeks for anything to arrive. But thanks for taking the time to respond.
Have you done a measurement comparison on the TC2 and TC3? I found my TC2 both more accurate and more stable in measurements than the TC3 (even after calibrating as suggested by FNIRSI) and readouts on the TC3 tend to jump all over the place.
Hi, to be honest, not really. I'm a bit tight on time for those reviews and evend trying to make it short already takes so much time. I will leave it as topic for another video. Thanks for watching!
Hi, thx for the video. I have a problem to conect it to my Pc, when i plug the Usb it tries to find the port Com drivers, but nothing, it can't find any driver. I use Win7 64bit, maybe the old win7 can be the problem? Do you know where i can download the drivers manually? Grazie
Hello! Sorry for late reply, house move and vacations. Normally, if you have the CH340/1 drivers and Texas instruments drivers installed on you PC, you can connect almost any chinese test device (oscilloscopes, multimeters, etc) and they will be recognized by the system. Thanks for watching.
Hi , thx for answer, but do you have a link for Texas instruments drivers? I found CH340/1, but i do not know where to get the Texas instruments drivers. Grazie
I got it, and i do not understand why when i measure a capacitor, it gives to me different value of Vloss. If i make 10 measurement on the same capacitor i get 8 different value of Vloss...... what is the reason? Thanks for the video
Hello! Sorry for late reply, house move and vacations. A capacitator is a analogic device (if can consider it like that) and you don't have always the same result because the internal reaction to the charge is different. Well, this is my opinion, but if someone else wants to chip in, we can all learn a bit more! Thanks for watching and sharing!
I updated the fw but I encountered problems. It doesn't recognize a 6.8 mf capacitor if connected between pins 1 and 2. It can read it between pins 1 and 3.....
Hello, it seems like you found a bug, you can always enter the FNIRSI support group on whatsapp and report that, they will correct and release a new firmware. Thanks for watching!
Hola! My writen spanish ends here 😁 The DSO-TC3 (blue one) is more complete, brings ESR for capacitors, function generator and few other perks. It is the model to replace the DSO-TC2 (yellow one). Thanks for watching.
China is not suffering from inflation for over a year - quite the opposite: in july the had over -5% deflation and also the currency has stalled compared to US $ This is caused by lower demand, cheapest russian oil and gas, and a general economy on the verge of collapse cause there is no growth anymore and the purchase index is also low, so their outlook is terrible. but they tend to raise prices and only in a feew spots you find the real chinese street prices which are 1/3 less than those on Aliexpress. At the end of the year they will have to cut the prices too the lowest ever just to achieve their sales goals and to meet the contracts they had signed, usually 10% more than last year which is close to impossible but they will try to lower the damage for missing the goals or forced payments.
Hello! Sorry for late reply, house move and vacations. I have an account on Taobao, the chinese AliExpress and the prices are 30% lower, sometimes more. I think that is because of the warranties AliExpress had to start giving to have the sucess than eBay or Amazon and conquer the ocidental clients. I don't think china will sofer much with the war, the major problem is conducting espionage that made them have santions from the USA, even if in my personal opinion, that might happened also to slow them down a bit, 5G was on full speed on chinese manufactures and the american ones didn't have that implemented, so a problem to the USA. But that's politics, for me, I just review stuff, chinese, american, german, whatever, if is electronics, just send it and I will review it 😁 Thanks for watching!
Unfortunately, it seems like you actually cannot run the signal generator and the oscilloscope at the same time. At least I was not able to run e.g. the sine wave and read it directly with my probe.
Hello, thank you so much for bringing this up and really sorry for the wrong information I passed. I selected the square wave because I wanted to compensate the probe, but I didn't test it with the sine wave (or any other wave for that mater) at the same time... what a shame... it should be possible to work with both at the same time. I went running to my unit to test what you said and I confirm it. Again, really, really sorry for passing wrong information. Thanks for watching and for reporting this!
Nice description & it is a very useful instrument for any Electronic service ,repair & testing lab /workshop ! Thanks a lot !
That’s a nice feature packed piece of test equipment. Thanks as usual for the detailed review Hugo.
Hi! Thanks for being here so regurlarly... feel really supported! Thanks!
Thanks for sharing this video and your insights. I have ordered one via your link to Amazon. Also subscribed to your channel.
Hi, Glad I could be helpful,. Thank you so much for your support and for watching!
have been using the dso tc2 for some time now , it works ok but it can measure an input voltage up to only 16volt, but the dso tc3 really upgraded that issue .
Hi Andy, yep that's true, now you have an increased voltage also on the "voltemeter", thanks for watching.
Thank you for the introduction - I am waiting for my DSO-TC3.
Hi! Hope you enjoy it and thanks for watching! It's a nice unit to have around and test components.
Congratulations on the super complete DSO-TC3 Review. I purchased this device, however, as soon as it arrived, I realized that the device incorrectly measured some components informing capacitor instead of register and so on. Plus it wasn't calibrating either. Anyway, what could be the origin of this problem? See, firmware updated to the latest. Thank you in advance for your work and if possible, please clarify this doubt.
Another question, too, is how to do the reset procedure on the device? Maybe this procedure will solve my problem.
Hi, sorry to hear that. A new firmware update might help. Please join the FNIRIS whatsapp support group and expose that problem to them. They're a quite responsive and probably will figure out a solution. Thanks for watching,
You use the factory defaults, should be an option on the menu.
I have to ask.
Which is better the DSO-T3 or the Zeeweii DSO154?
Or better yet, what is the best Budget 3-in-1 oscilloscope?
I can get both of these for similar prices $50-60
but I just need one oscilloscope as a beginner.
What would you get ?
Hello Terence, if you JUST want the oscilloscope, go to the Zeewei, it has a function generator also and it goes up to 18Mhz, it will allow you to handle for example the clock of arduino (16Mhz). If you want something more complete with also a component tester, DSO-TC3 is a good option. The oscilloscope is very limited, much more than the DSO154, but you a lot of other function delivered. Bottom line, it depends on you final objective. Hope it helped and thanks for watching!
I buyed the dso120 because i saw your video, now ..can you use a protoboard AND test a cristal 200 mhz? If you do note have a signal generator, maje a full test
Hello! I have here several crystal to create a board in a project to test up to 350Mhz, unfortunetally didn't had the time yet to make it happen. Thanks for watching!
Great video thanks! My issues are when i short the 3 wires to calibrate mine it doesn't recognize it and does nothing. Also it doesn't let me use the generator on the oscilloscope to do that calibration either. Please help!
Hi, thanks for watching, if this is not working properly, you should contact FNIRSI, they will help. Just enter the FNIRSI whatsapp support group as ask there for help.
This looks really nice and something I could use in the field. Hopefully I can find a nice case for it to fit in.
Hi Tron, there's plenty in Aliexpress. It really seems they make an effort this time. For me the only thing missing is a little more juice in the analog bandwith of the oscilloscope, but I get it, it is made to be cheap, so... thanks for watching!
Nice bit of kit, you should also know you can upgrade the firmware, the only odd thing is on the website you can't down load it for some reason but other youtube's have provided access to the the firmware for version 3
Hi, the website is not working correctly, if you got to the whatsapp channel and ask for it, they will provide you a Google drive link with all the info on all the devices. Thanks for watching!
Simply fantastic your review! Thank you.
Hi, Thanks & glad it was helpful! Thanks for watching!
I have a question. It is DSO, which stands for Digital Storage Oscilloscope. Does it have event capture storage ability?
Hi there, nice catch... 😁 no, it doesn't. The save waveform function is not available in this oscilloscope. Thanks for watching!
If the FNIRIS DSO-TC3 has BNC connectors, I would buy class sets of them.
Also, does anyone know if it can store and playback readings as a DSO can?
Hi, it doesn't have the BNC connectors, but has MCX that will allow you to use a MCX to BNC adapter. I would buy for sure a set of probes. Regarding the DSO, you can't save the waveform as you do on some digital oscilloscopes. Thanks for watching.
Hugo, parabéns. Como sempre, seu vídeos muito bem produzidos e explicações muito esclarecedoras.
Olá Sérgio, faz tanto tempo 😁 espero que esteja tudo bem contigo! Desculpa não ter conseguido voltar ao vídeos em português, mas já luto para conseguir fazer um vídeo por semana em inglês. Obrigado por assistires e tudo de bom!
Hi, im looking for a budget oscilloscope for a vintage stereo amplifier repair and restoration project. Is this recommended and suitable or should i get a better one? Thanks.
Me too
Hi, if you don't need bandwidths over 200Khz, this one would work. If you need something over that, you should consider the FNIRSI that wll be released this month or even a Zeeweii. Thanks for watching!
Great review.
I thinking about ordering one of these , But Im curious
1) is there a way to set the test frequency for inductor testing if so what frequency options does it have?
2) does it display the Q factor of inductors or does it require manually calculating the Q factor?
Hello! Answering your questions 1) not that I'm aware 2) don't think so. Thanks for watching!
whre do you buy the adapter for oszilloskop?
Hi, what do you mean? Power supply? That a normal USB one... thanks for watching
Parabéns pelo Review do equipamento. Estou escrevendo em português porque descobri nos comentários que é brasileiro 😃. 👏👏👏. Você pagou alguma taxa ou passou ileso pelos famintos por imposto? Um abraço
Olá Franco, na realidade sou Português. Hoje em dia para importar pago sempre taxa, é uma politica da união europeia mas tenho vários amigos youtubers do Brasil, o Daniel do canal @EletronicaeTecnologia, o Ronivon do @SERTECMANUTENCAO, a Juliana do @ju_lab entre outros e o que tenho ouvido é que está mau nas encomendas que vem do exterior, o imposto é muito alto. Alguns ainda conseguem alguns produtos que passem sem imposto, mas acho que está cada vez mais raro. Um abraço e obrigado por assistires.
can you use the wave generator channel and the oscilloscope probe one at the same time ?
Hi Lisa, no, I don't think so. But the square wave is always available. Thanks for watching!
Hi, My tc3 is not measuring bt136 and bt151 thyristors. I do not know why. Have you tested with these components?
Hi, sorry no and don't have none here right now to test. Thanks for watching!
Hello. can an attenuator be used for this device, so that it can also be used in higher voltages? thank you.
Hi, you mean a probe with 10x or 100x, yes you can use it with this device. Thanks for watching.
Hnk you very mutch i'm from algeria
Hi, thanks so much for your nice comment, big cheers from Portugal and thanks for watching.
Hi, I bought this device without a probe, can I still use it to test my car amp for clipping, the amp outputs 500watts 30volts, it's a car audio amplifier. Thanks. I've never used a oscope before.
Hi Jonhy, you should. Without the probe you can test only up to 40V, I'm not sure if it is Vpp but I think it is. The probe is extremelly cheap, is always good to have one, but please veritfy in the manual if what I told you is right. Thanks for watching!
@@TechCornerTVthe amp output at 2ohms is 30volts so it should be ok, I'll order a probe, I live very remote takes 3 weeks for anything to arrive. But thanks for taking the time to respond.
Thank you very much for the perfect video👍
Hi, You're welcome and I«m glad you liked it! Thanks for watching. PS - Sorry the late reply, but time for replies is really short these days.
Have you done a measurement comparison on the TC2 and TC3?
I found my TC2 both more accurate and more stable in measurements than the TC3 (even after calibrating as suggested by FNIRSI) and readouts on the TC3 tend to jump all over the place.
Hi, to be honest, not really. I'm a bit tight on time for those reviews and evend trying to make it short already takes so much time. I will leave it as topic for another video. Thanks for watching!
Does this not have a VI curve tracer? Otherwise it is really a missed opportunity.
Hi, don't think it has. Thanks for watching.
How to know unknown voltage rating on SMD capacitor? the capacity 240uF
At 27:46 a little bug : Vpeak = 0.48 and Vrms = -0.02 whereas it should be always >0, i.e 0.7xVpeak ≈ 0.35 V
Hi Patrick, thanks for sharing and for watching!
Enjoyable and useful thanks ☺
Hi, glad you enjoyed it and thanks for watching!
What is the maximum current that the signal generator can withstand ?
Hi, if you mean current, I don't know, ir can ouput an adjustable 3.3V. Thanks for watching.
Hi, thx for the video. I have a problem to conect it to my Pc, when i plug the Usb it tries to find the port Com drivers, but nothing, it can't find any driver. I use Win7 64bit, maybe the old win7 can be the problem? Do you know where i can download the drivers manually? Grazie
Hello! Sorry for late reply, house move and vacations. Normally, if you have the CH340/1 drivers and Texas instruments drivers installed on you PC, you can connect almost any chinese test device (oscilloscopes, multimeters, etc) and they will be recognized by the system. Thanks for watching.
Hi , thx for answer, but do you have a link for Texas instruments drivers? I found CH340/1, but i do not know where to get the Texas instruments drivers. Grazie
Nice video, that is one thick usb c charging cable you got, where did you get it?
Hi! Yes it is, check it in this video, just need to see the unboxing ruclips.net/video/U56baCDtDrg/видео.html . Thanks for watching!
Great review 👏 I like mine!
Hi, I love mine also, use it frequently to test components. Thanks for watching.
Is it applicable to use generator at the same time using oscilloscope
Hi, don't think so. You can use the square wave output, but I don't think it will work both at the same time. Thanks for watching!
I got it, and i do not understand why when i measure a capacitor, it gives to me different value of Vloss. If i make 10 measurement on the same capacitor i get 8 different value of Vloss...... what is the reason? Thanks for the video
Hello! Sorry for late reply, house move and vacations. A capacitator is a analogic device (if can consider it like that) and you don't have always the same result because the internal reaction to the charge is different. Well, this is my opinion, but if someone else wants to chip in, we can all learn a bit more! Thanks for watching and sharing!
Hi, it could be, but, in that case also the Esr should change..... but it does not. @@TechCornerTV
Thanks
Hi, glad it was useful, thanks for watching.
Excelente 👌
Ola! Gracias, your support means a lot. Thanks.
коментарий для продвижения.канала.Благодарю
Hi, thank you so much for your consideration and for watching!
I updated the fw but I encountered problems. It doesn't recognize a 6.8 mf capacitor if connected between pins 1 and 2. It can read it between pins 1 and 3.....
Hello, it seems like you found a bug, you can always enter the FNIRSI support group on whatsapp and report that, they will correct and release a new firmware. Thanks for watching!
39:00 - That looks like a UART header or similar above the main CPU. I'm sure someone will figure out what it is.
Hi Frank, agree with you. Thanks for watching!
Me gustaría saber si existe una actualización del firmware para el TC-2
Hi, not that I'm aware. Thanks for watching.
Can we look wave of 220v ac?
Hi, yes but need probes at 10X attenuationm, but always check the specs and the manual, don't trust me 😁. Thanks for watching.
@@TechCornerTV this grey prob for this function right?
I heard it's not safe to touch the coupler if when checking AC with the probe. (the coupler that connects to the unit)
Is that true?
Creo compro este rápido si gracias pondré un video jjjj
Ola! Muchas gracias por ver el video. That's my all spanish there 😁 Glad it was helpful.
Cual es mas completo amarillo o celeste saludos desde Perú
Hola! My writen spanish ends here 😁 The DSO-TC3 (blue one) is more complete, brings ESR for capacitors, function generator and few other perks. It is the model to replace the DSO-TC2 (yellow one). Thanks for watching.
It still lacks some vital feature , 2 ch scope.
Hi. They will have a totally different device this month, 2-ch 180Mhz,.... different price also. Thanks for watching!
China is not suffering from inflation for over a year - quite the opposite: in july the had over -5% deflation and also the currency has stalled compared to US $
This is caused by lower demand, cheapest russian oil and gas, and a general economy on the verge of collapse cause there is no growth anymore and the purchase index is also low, so their outlook is terrible. but they tend to raise prices and only in a feew spots you find the real chinese street prices which are 1/3 less than those on Aliexpress.
At the end of the year they will have to cut the prices too the lowest ever just to achieve their sales goals and to meet the contracts they had signed, usually 10% more than last year which is close to impossible but they will try to lower the damage for missing the goals or forced payments.
Hello! Sorry for late reply, house move and vacations. I have an account on Taobao, the chinese AliExpress and the prices are 30% lower, sometimes more. I think that is because of the warranties AliExpress had to start giving to have the sucess than eBay or Amazon and conquer the ocidental clients. I don't think china will sofer much with the war, the major problem is conducting espionage that made them have santions from the USA, even if in my personal opinion, that might happened also to slow them down a bit, 5G was on full speed on chinese manufactures and the american ones didn't have that implemented, so a problem to the USA. But that's politics, for me, I just review stuff, chinese, american, german, whatever, if is electronics, just send it and I will review it 😁 Thanks for watching!
Had the same thing but it broke after three times of use.
Hi, sorry to ear that. I have two, TC2 and TC3 and never had major problems with it. Might a bad batch... thanks for watching!
Why isn't there auto power off?
Hello, I believe there is, almost sure of that. Thanks for watching.
Unfortunately, it seems like you actually cannot run the signal generator and the oscilloscope at the same time. At least I was not able to run e.g. the sine wave and read it directly with my probe.
Hello, thank you so much for bringing this up and really sorry for the wrong information I passed. I selected the square wave because I wanted to compensate the probe, but I didn't test it with the sine wave (or any other wave for that mater) at the same time... what a shame... it should be possible to work with both at the same time. I went running to my unit to test what you said and I confirm it. Again, really, really sorry for passing wrong information. Thanks for watching and for reporting this!
可以請您製作字幕嗎?謝謝
Hi, you have to wait a few hours for youtube generate the subtiles in your language. They should appear soon, thanks for watching!
@@TechCornerTV 謝謝
Este equipamento não é confiável costuma muito trava e nau tem concerto
Olá, obrigado por assistires!
pls give me fnirsi whatsapp group link
Hi! Just to to www.fnirsi.cn/support and you'll have it on the top of the page on a QR Code. Thanks for watching!