Plastic pipe fitting mould: a special 90° elbow injection mould.
HTML-код
- Опубликовано: 20 авг 2024
- This video introduces a set of plastic pipe fitting molds of 90-degree elbows. Bent pipe fittings, especially plastic elbows. Although the structure looks simple, in fact their corresponding injection mold structure is indeed very complicated. Common plastic elbow are 90 degrees and 180 degrees. The mold structure often uses core-pulling structures such as arc core and chain core.
The 90° elbow introduced in this video does not use the structure described above. Instead, it uses straight core pulling. Because the arc segment is relatively short. Of course, this is just one of the mold design solutions. It may not be the best mold design solution. But this is also the fun of mold making.
This mold has two cavities. Two 90° elbows can be produced at a time. This plastic elbow mold has two horseshoe-shaped cores. The driving device of the core pulling mechanism includes oil cylinders on both sides and a guide rail in the shape of a boomerang. In the video there are detailed analyses of various institutions. We can clearly know how it works.
If you want to know more about the structure of injection molds, please subscribe to our channel. You can also follow our blog to get items.
www.spark-moul...
thanks I was wondering how to do the inner wall in a 90° bent pipe. much appreciated
Uauuuu top this mold. Mechanical perfect.
👏👏👏👏👏👏👏👏👏
Es un buen diseño de molde
Thanks
gorgeous
Great. Thanks you very much
Please see how the close slider like going forward
شكران
PVC pipe fitting mould
एन्डकेप 4 इन्ची 5 इन्ची बनाने के लिए मोल्डिंग मशीन+ पूरा सेट कितने रूपये में सेट हों सकता है सम्पूर्ण जानकारी चाहिए
at 1:18 when yellow poll pulls the brown round slider, it came out after bending. My question is that when it will close again will it create problem by rotating itself or damage cavity block while closing please clear this
The green stopper behind the yellow round bar will help push it to it's initial position you can see a round hole is provided till a certain distance which will help it, just need to be too sure and confident of the pin used to connect the yellow and horseshoe block that's still a concern
❤
Can you do aluminum elbow in HPDC?
सर इस मशीन की रेट क्या है बताई जा सकती हैं
Which software do you use to do the animation of the mold components?
If we inspect triada view then that may be NX
haw to communicate
Sir, what is the start cost of this business
Hi,Could you provide me with the specific needs of the pipe fitting mold? like 2D/3D Model or samples.I can provide you with an accurate quotation.Thanks
whatsAPP/Skype :+8618902444748
@@SparkMould prize
Cost ?