HI..AWESOME VIDEO GUYS..WHAT WERE THE SYMPTOMS OF THE CAR ,THAT YOU NEEDED TO DO ALL THAT..LOOKS LIKE A MAJOR PROBLEM ,AND THERE SHOULD BE A RECALL FOR THAT. YOU GUYS PUT IN A LOT OF WORK THANKS FOR YOUR VIDEO AND YOUR TIME.
The taking out the timing cove at the end was the hardest part for me, which you skipped in the video! I totally caught it, you could not take it out easily so so cut that part to hide the shame!!
Hey I'm watching your videos but I don't see the video for I got a 2016 Hyundai accent with 1.6 l inline 4 cylinder and it's got a timing chain and the water pump is connected to the timing chain cover plate and so I was just needing a little help with like setting the timing and making sure that I'm all set right before I but back up thank you
Interesting video thanks. Do you think if you are replacing the tensioner you should replace the chain as well? I have an i30 that sounds like it needs a new tensioner, about 130,000 miles, and I guess the labour is going to be expensive to get to the parts
Hi @AutoRepairGuys, My 1.6 i.3 DOHC is giving VVT failed on the diagnostic tool, the car seems to not have good power, I have replaced MAP/O2/VVT sensors, still power is low, I also checked oil level it is good. Any ideas?
Hi. I have 2017 Hyundai elantra runs good till 1 hour after oil gets hot car turning of and stopping and gives Camshaft pozition sensor code. After couple hours I start again runs good and same think happening.I replace all sensors. I think actuator, timing chane,variable valve those parts can cause a problem what you think please let me know
Interesting video. Is that a petrol engine? I have CRDT 1.6 i guess the procedure is the same but rotating the crank will be difficult due to compression? Open the injectors a little? So to repace tensioner needs no special tools? What if the chain needs to be replaced? Local mechanics say chain and tensioer needs special tools? So they wont do the job😟 What do you think? My engine runs fine but it sounds like chain is loose.
Thanks for your very helpful videos. But can i know how to clean or replace the EGR VALVE in the Hyundai tucson 2011 it is gasoline fuel engine not diesel
After you get it all back together, are there any certain requirements? I have a Kia 3.8 V6 and replaced the guides, tensioners, and chains. After put back together, I was thinking about pulling the fuse/relay disabling the fuel system and letting it crank for a minute or so to oil- prime the system? Any thoughts? thanks
hi Guys you are doing great job, on this channel, i'm really enjoying watching your videos!!!!! do u have, a torque spec for i20 for a tensioner and a chain cover
Cold start are difficult in morning and evening,rpm gage doesn't register and slippery road icone light in dash, i let engine running 20 sec. Stop and restart engine ,every thing back to normal.i can ear timing chain slack beeing pickup when oil pressure rises in tensionner
i just did an 2017 elantra gt 2.0L timing job cause the tensioner failed. however i have a feeling the new tensioner failed. the problem i have is, when i rotate the engine 2x my marks line up but i get slack in the chain.. any idea why? is there a new chain design compared to the oem one?
Good day guys i have a 2012 1.6 i20 can you please provide me with the torque setting for the engine as u have to replace timingchain tensioner. Please
Please my 16 elantra is driving me nuts I have done everything but the throttle body gasket and the intake and this stupid car shakes at every light stop sign drive through I will drive it to you I really just want the idle up and if I gotta buy a 1000$ scan tool ok but please tell me just how to turn the idle to about 800
Products that we use and recommend:
► Timing Chain Tensioner: amzn.to/2LDpaA9
► Timing Chain: amzn.to/2LBNkLm
► Timing Chain Kit: amzn.to/3Ns9qCt
► Assorted Fuses: amzn.to/4f6qJos
► Panel Removal Set: amzn.to/3YiMADu
►Torx Set: amzn.to/2hbyWgd
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Engine Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
HI..AWESOME VIDEO GUYS..WHAT WERE THE SYMPTOMS OF THE CAR ,THAT YOU NEEDED TO DO ALL THAT..LOOKS LIKE A MAJOR PROBLEM ,AND THERE SHOULD BE A RECALL FOR THAT. YOU GUYS PUT IN A LOT OF WORK THANKS FOR YOUR VIDEO AND YOUR TIME.
The taking out the timing cove at the end was the hardest part for me, which you skipped in the video! I totally caught it, you could not take it out easily so so cut that part to hide the shame!!
Hey I'm watching your videos but I don't see the video for I got a 2016 Hyundai accent with 1.6 l inline 4 cylinder and it's got a timing chain and the water pump is connected to the timing chain cover plate and so I was just needing a little help with like setting the timing and making sure that I'm all set right before I but back up thank you
Interesting video thanks. Do you think if you are replacing the tensioner you should replace the chain as well? I have an i30 that sounds like it needs a new tensioner, about 130,000 miles, and I guess the labour is going to be expensive to get to the parts
Hi @AutoRepairGuys, My 1.6 i.3 DOHC is giving VVT failed on the diagnostic tool, the car seems to not have good power, I have replaced MAP/O2/VVT sensors, still power is low, I also checked oil level it is good. Any ideas?
Hello, how to make sure if the tensioner is good?
Drinking game. Everytime he's says "guys" ...take a drink.
Also thanks for the information lol
Hi. I have 2017 Hyundai elantra runs good till 1 hour after oil gets hot car turning of and stopping and gives Camshaft pozition sensor code. After couple hours I start again runs good and same think happening.I replace all sensors. I think actuator, timing chane,variable valve those parts can cause a problem what you think please let me know
Interesting video. Is that a petrol engine? I have CRDT 1.6 i guess the procedure is the same but rotating the crank will be difficult due to compression? Open the injectors a little? So to repace tensioner needs no special tools? What if the chain needs to be replaced? Local mechanics say chain and tensioer needs special tools? So they wont do the job😟 What do you think? My engine runs fine but it sounds like chain is loose.
Need special tools to replace timing chain as well as tensioner?
Thanks for your very helpful videos. But can i know how to clean or replace the EGR VALVE in the Hyundai tucson 2011 it is gasoline fuel engine not diesel
You did not need the ring gear holding tool sst 09231-3d100 to complete this job? It calls for it in the factory manual.
Fantastic video my friend 👍👍👍
After you get it all back together, are there any certain requirements? I have a Kia 3.8 V6 and replaced the guides, tensioners, and chains. After put back together, I was thinking about pulling the fuse/relay disabling the fuel system and letting it crank for a minute or so to oil- prime the system? Any thoughts? thanks
hi Guys you are doing great job, on this channel, i'm really enjoying watching your videos!!!!! do u have, a torque spec for i20 for a tensioner and a chain cover
Thank you! Excellent job. 👏🏽👏🏽👏🏽
could u make a video for valve spring removal for 2013 hyundai elantra gls 1.8l
Cold start are difficult in morning and evening,rpm gage doesn't register and slippery road icone light in dash, i let engine running 20 sec. Stop and restart engine ,every thing back to normal.i can ear timing chain slack beeing pickup when oil pressure rises in tensionner
i just did an 2017 elantra gt 2.0L timing job cause the tensioner failed. however i have a feeling the new tensioner failed. the problem i have is, when i rotate the engine 2x my marks line up but i get slack in the chain.. any idea why? is there a new chain design compared to the oem one?
Did you figure this out? I'm having the same issue, I've gotten 2 new tensioner under warranty but still getting slack.
Why was the oil pan pulled to do the timing? Can it be done without doing that?
Good day guys i have a 2012 1.6 i20 can you please provide me with the torque setting for the engine as u have to replace timingchain tensioner. Please
Is 1.4l mpi 2010 inteferance engine?
Please my 16 elantra is driving me nuts I have done everything but the throttle body gasket and the intake and this stupid car shakes at every light stop sign drive through I will drive it to you I really just want the idle up and if I gotta buy a 1000$ scan tool ok but please tell me just how to turn the idle to about 800
Good job man
Good job
Very good
After how many miles should the tensioner and chain be replaced on a post 2012 GD i30? That's the 1.6 diesel. Thanks
I’d be using my 1/4 air racket
What was wrong with that car? Howmany kms
To much explaining bolds!
Very nice