The information and detail how to remove and install a diesel injection pump was Marvellous, Also working with a 1970’s Ford 5600 was a change rather then JD or international 🇬🇧🇮🇪.
I have a Ford 5000 that was leaking diesel from the end of the injection pump. I was told the injection pump needed rebuilding tonthe tune of $1,200.00. It was still running good so I let it slide. Later saw a tractor mechanic, told him what I had and he asked if I had changed the lift pump on it. He said 9 times out of 10 that was the problem. Bought 1 for $35.00, changed it, drained and refilled the oil in it, crossed my fingers, started the engine, and it never leaked another drop.
my 1964 ford 5000 probably needs the injection pump rebuilt. it takes 8 turnovers before it starts up. replaced the fuel lift pump as well. does that make sense there jacob?
Great to get her going I left ours running today and accidentally run her out of diesel and now won't start so just changed filter hopefully can get mine going tomorrow
The information and detail how to remove and install a diesel injection pump was Marvellous, Also working with a 1970’s Ford 5600 was a change rather then JD or international 🇬🇧🇮🇪.
👍👍👍👍 May GOD bless you 10,000 TIMES for being a BLESSING to us. Love those close up shots with the phone.
you are very detailed about taking this pump out ,.. helped so much thank you God bless
No problem
I have a Ford 5000 that was leaking diesel from the end of the injection pump. I was told the injection pump needed rebuilding tonthe tune of $1,200.00. It was still running good so I let it slide. Later saw a tractor mechanic, told him what I had and he asked if I had changed the lift pump on it. He said 9 times out of 10 that was the problem. Bought 1 for $35.00, changed it, drained and refilled the oil in it, crossed my fingers, started the engine, and it never leaked another drop.
What’s the lift pump?
Working like new, now! 🚜 Thanks for sharing!
What a GREAT install and video! Thank you for your business and promoting our services!!!
No problem. You all do Great work. Hope I’m sending some business your way!! 🤘🤘
How much?
Yes how much. I’ve got one that needs rebuild
What was the symptoms of a bad injection pump?
Just sub’d your channel after seeing you on BTP. Thanks for sharing what you do.
Right on. Thanks for subscribing
my 1964 ford 5000 probably needs the injection pump rebuilt. it takes 8 turnovers before it starts up. replaced the fuel lift pump as well. does that make sense there jacob?
Great to get her going I left ours running today and accidentally run her out of diesel and now won't start so just changed filter hopefully can get mine going tomorrow
Good Luck 👍🏻
Bleed the lines I guess
How much did it cost to get the pump rebuilt?
Did you have to set it on top Dead center if so where are the timing marks
How do you connect the clip behind the pump that goes back to manual lever at steering wheel
How much did they charge to rebuild your pump?
You need to show folks how, where and how much oil to put in the injection pump. Looks like that part got skipped....
I have a 7600. In the process of take my pump off. Mine is a little different than your 5600.
7600 had a Simms inline pump. Removing those are totally different than the Cav rotary pump.
Was hoping for pressure washing lol
Yea. Need to use the hot water pressure washer on this tractor.
I like it ford 5600
All the handheld shots are hard to watch. Makes one nauseas... Other than that I appreciate the content