LOTS OF MOSS! ROOF CLEANING / PRESSURE WASHING
HTML-код
- Опубликовано: 21 сен 2024
- Really heavily contaminated with moss. Lots of gutter clearing on this one. Because this roof is so old I used as little pressure as possible to remove the majority of the moss. There’s still a small amount of stubborn moss spores left but these will die off with the bio treatment! Please like and subscribe. Thanks for watching
Hey dude nice job 🙂👍 can i ask what power pole set up you use and where you got it from , all the best 👍
Hi buddy. Thanks for watching, this is the watertek power pole with foot pedal from Rutland pumps. Hope that helps. Please like and subscribe for more in depth videos in the future 👍🏻
great job - i do roof cleaning in Ireland - how long did it take you - i use twin pressure washer - never used single turbo or fsc
Thank you. This took me just over two days. I work alone so everything so done by myself so it takes much longer.
Fsc is great for speeding the job up but only works on certain tiles (low profile or flat tiles) and doesn’t work properly if the build up of moss is really bad as it leaves bit in between the gaps in the tiles
Lovely job, did you use any heat on this one
Hi mate. No heat on this roof just water. I’m looking at investing in the system in the near future though.
@@Avonandstourexteriorcleaning Same here I only scrape and bio at the moment. Can I ask when you turn pressure down do you alter your unloader. I do pressure wash with a slipstream pro20 but have never adjusted the unloader didn't know if your meant to or not I'll be using this pressure washer for roofs to begin with
That’s how I started out buddy. No I just simply adjust the pressure on the valve on the foot pedal which saves me getting back down ect. My new pressure washer(eventually) I’m getting the auto rev system on so when I turn the flow down up near the pedal it slows the revs down on my machine which saves me getting down plus saves on fuel and rpm meaning I should get a longer life out of my machine.
Mine ones a 10pm machine at the moment do the flow is just not quite enough, but if you were running a 21lb m machine then yes you would probably have to adjust the loader to compensate for it.
@@Avonandstourexteriorcleaning Sounds a good machine