As someone who used to work as an assembler at a home improvement store, I can say that that is an accurate representation of how to put together an actual lawnmower.
Installed these on a riding mower ruclips.net/user/postUgkxetgfkJxfdT_B2vGYP-uNTLaBbim9OKTD . They were sharp out of the box, although I've never liked blade edges that were coated...not quite as sharp as I personally want. Using my belt sander, I removed the coating from the cutting edges and refined the edge enough to shave with them. So far, after three runs, these blades are holding up as expected. Even after hitting a few fallen 1/2 inch or so branches, the edges are still sharp as heck. No edge dings, no warping, etc. As far as installing them, the cutouts were of the proper size and shape to fit my aging Craftsman mower. Very satisfied.
I wasn't sure if I'd like this video and I almost didn't watch it, but I figured that I'd give it a shot because I usually enjoy our videos, and I'm glad that I watched it.
That sounds cool, but if they aren't made from aluminum they're made of crappy pot metal. An edge would never last with either, but if it's pot metal it would most likely crack. He could maybe make some razor razor blades though.
REED BROOKS you know what would be cool though? If he took all the wiring, separated it by material, and made some sort of a Damascus (like Alec Steele did with the copper and nickle) and made something like box cutter blades.
I know you didn't intend to give the larger one a 'rough' finish, but I think I like it better this way. The contrast between the small/neat cleaver and the big/rough one really adds to the vid imo.
Anthony Vandeput yup, that’s what turned me from being kinda annoyed at the super hack jokes and anti-Trump lame comments. I literally spit taked my coffee on my phone.
I honestly don’t care who is for or against the president of the USA. I’m definitely against bitch’n about it for four years and not actually getting anything done. Is Trump an egotistical douche? For sure but that’s every single president ever, it’s kind of a requirement for the job. Also he kinda looks weird and is bombastic but that’s no something that should prevent someone from doing the job especially according to a group of people looking for equality and acceptance, it works for people you don’t like as well. (I don’t like the man but have trouble finding his work in any way worse then some of the “better” American leaders, he’s just extra douche about it, and quite frankly me liking him has nothing to do with the work he needs to do.)
Dang. That looks and is one hell of a quality knife. You could probably sell things like that for good money seeing how much work goes into making these and the quality. You could probably do that as a side hustle or even main source of income if youtube ever comes to an end. Making handmade knives and axes and stuff like that.
Oh okay. That's interesting to know. I don't know much about it but just thought the end result looked really professional. Thank you for clearing that up. Either way, Eli is very talented imo and puts in lots of hard work.
King Panda new mower blades yes but old circular saw blades and old mower blades were made out of extremely good high carbon steels my dad and I make and sell handmade knives and we use these a lot
Just some tips to help you out a lil Don't use your vacuum cleaner to collect metal filings off the grinder, due to it being able to set fire to a bag/filter (if you got one in there) or sawdust. I'm glad that you didn't get discouraged from the last fire but I don't want you to ever just give up. Your work is truly inspirational (and inspired me to start making on RUclips (btw Thanks)) Secondly when hand sanding and moving through the grits change the angle between each grit, by about 30-45 degrees, this will allow the sandpaper to cut more effectively and it will be easier to see the the scratch marks for you to follow and if you can get higher grits try and go above your desired finish and go back (this will get you the best possible finish for them crazy shiny blades, its time consuming but if you have time the finish is well worth it!) thanks for being inspirational stay safe and happy crafting!
This video is proof that your videos are becoming different. Your channel is headed in a different direction, and it's looking awesome so far! Keep up the awesome work, can't wait to see what's next.
It's been a while since I've watched. The leap in production quality in the past half a year or so has been awesome (and it's not even that they were lacking in presentation before!). You've done a super good job, keep at it.
duuuuuude you need to grind away the oxide (the black crap ) with the angle grinder because the oxide is super hard thats why it took so long to grind away , plz like so eli sees this
I almost don’t care about the build. The first half a dozen lame lawn mower anti-Trump jokes had me groaning but Eli didn’t let up and I actually spit my coffee on my phone. While I was cleaning up that mess I dropped it in the sink and kept laughing.
My one constant thought from seeing the thumbnail to the completion of the hog splitter was just the phrase “good for the taking of heads”. That is easily the most *brutal* thing I’ve seen in months. 🤘
It’s honestly so cool to see someone really care about what they do and watch them put time and effort into something to get the results they want. Respec
This was my first ever ZNA video. I saw it after ignoring it in my recommendations for about a week. So glad I was bored at two am and went down the rabbit hole of this channel
The editing of this video is much better than previous videos. I especially like how the cuts match the rhythm of the song, not only does it feel natural but it also makes the video look much more professional. P.S. the hug splitter is a definite go-to zombie apocalypse melee weapon :)
I can really see why you said you were proud of this vid, bro. You nailed it with the skit at the beginning. I thought that's all the video was going to be, but we get a build too :D
Love the work you put into your videos and I hope you know you are very appreciated for it. The quality of every single one of your videos (past 2015) is just amazing so don't worry bout like "would my viewers care if I do or do not do this?" don't worry about it. Every time you post I get excited so don't worry bout pleasing the viewers cause by doing what you like you already do my dude. Keep up the very hard but good work!
Very satisfying video eli. The cleavers look clever. If I had the tools and the space I would be doing what you are doing on my free time. Make a little extra money aside from my job.
Aj V Rebar is melted down scrap steel, so it can be what ever steel quality. That means that one piece of rebar can have one inch high carbon stell and the rest mild steel, which means it is unfit for making tools and weapons.
@@AFUVFX Mild steel will not harden during a heat treat, that's the problem. It has too little carbon in it and stays soft and even brittle, it's not good knife steel, much less sword steel
You should try to make an actual everyday carry style fixed blade. Like make it look really nice with a decent steel and all around good materials that will last long. Take time with the design and make it something durable and pretty to look at. Just a suggestion, but I think it would be really cool and I want to see what you can create and design.
Loving the new kind of montage towards the beginning of the build. Great video. One criticism is that I remember a time where I felt like i learned a new build technique in each video and I feel that the educational aspect of the builds seems to be missing in this one and I hope that's not foreshadowing the future of these builds. Still an awesome video.
Absoloot Disastr What im saying is a long time ago videos were basically a how-to guide or at least he explained his process each step of the way so you learned things. I'm not saying it's a problem that this aspect is gone I just miss it.
You need to get your content on instagram, your content would do amazing there. Take angled high quality photos of all your builds, put a cool filter, post and profit. You could also do teaser videos to drive traffic here.
Lil Chromezome If someone said that to me in real life I would assume that they were saying it Sarcastically so I was clarifying that I was not saying it sarcastically. Does that answer your question?
Watching this channel made me realize that modern epoxies would be an unbelievable wonder to people even a century and a half ago. Forget the advancement of techniques and machinery, I'd imagine that the ability to mix two compounds and get a very resilient bond would blow minds. Doubly so when it's something so absurdly available, to the point that it's barely remarkable. Sure, glues have been a thing since before written history, but epoxy is a whole different animal.
Damn dude, these videos are so much different stuff all piled into one. lawnmower jokes, cleaver building action, chopping and cooking. Noyce. Glad I found this channel.
![ROSÉ (로제) - number one girl [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/A9oByH9Ci24/mqdefault.jpg)
not even joking that lawn mower shooting bubbles is pretty sick
Yea I just ordered one similar for my baby brother.
I think I might get one for my self just to put on display.
its the exhaust
Just implement that feature to a real lawnmower
but is it californa legal tho
A six minute skit to set up a lawnmower blade build?
Not even mad.
Pleased
I genuinely appreciate the fact that he reviewed a toy lawnmower. A+
One is a cleaver, the other is a darksouls weapon. God damn
Nah. Bardiche, Brush Axe, or Hog Splitter.
It’s the weapon you get after killing Mildred
So basikly level one and level 200 on cleavers in an mmo rpg
Shit looks like a monster Hunter weapon
No curses please
I didn’t realize the whole calling skit was fake until Wumbo
Same xD
ikr i thought he actually called a lawnmower company
It's real though. The Hell are you talking about mate?
Captain I dint no you were till this.
What do you mean its fake its real wumbo is for work m is for mini
this was 30 minutes without a second being boring. I didn't even notice the time passed while watching this amazingly enjoyable video.
I cannot believe this was 5 years ago. Time flies, and I still love watching some ZNA
Lawnmower reveiw
Knife
Burning Grinder
Big Knife
Cooking Food
Boi what a ride this video was
How could yoy forgery it started p
Out with DRUMP being a facist lawn keeper
As someone who used to work as an assembler at a home improvement store, I can say that that is an accurate representation of how to put together an actual lawnmower.
Im especially crying at his face when he spilt the whole bubble “fuel” on his pants
That beginning skit had me in tears!
Yeah it just makes me uncomfortable. Don't see how the confused political commentary/obtuse attempt at a joke adds anything to the build/video.
Did not expect a wf partner do be here 😐
FourEye it adds comedy...
FourEye I think he was just mocking people on the left in the fact that they exaggerate every thing, it was pretty funny
Shout out to the libtards
Installed these on a riding mower ruclips.net/user/postUgkxetgfkJxfdT_B2vGYP-uNTLaBbim9OKTD . They were sharp out of the box, although I've never liked blade edges that were coated...not quite as sharp as I personally want. Using my belt sander, I removed the coating from the cutting edges and refined the edge enough to shave with them. So far, after three runs, these blades are holding up as expected. Even after hitting a few fallen 1/2 inch or so branches, the edges are still sharp as heck. No edge dings, no warping, etc. As far as installing them, the cutouts were of the proper size and shape to fit my aging Craftsman mower. Very satisfied.
I wasn't sure if I'd like this video and I almost didn't watch it, but I figured that I'd give it a shot because I usually enjoy our videos, and I'm glad that I watched it.
Masterwizard25 slow burn build up. Definitely worth it. Actually super worth it.
Why did you say “our” lmao
Ricardo Celaya Maybe I meant to say "your", maybe I'm just a communist; you'll never know.
I was in the same boat as you man, this is wonderful!
Masterwizard25 same
Meme king is back from the ashes
Kevin Stutzman They say he rose like anew phoenix. Fresh born from the unkindled remains.
Kevin Stutzman literally.
YES
It takes time to clean that forage of his
Oof. Too soon.
Burny Sander is honestly the most perfect name you could’ve ever given to that belt sander
Random stuff with Michael I Just realized the sheer significance of that statement.
Says “im gonna use my blowtorch” proceeds to use flame thrower
AprilandLuke it’s called the inferno it’s a legit blowtorch that you connect to a propane tank
What a long and convoluted way of informing us that you'll be using lawn mower blades... I love it
Make a razor sharp blade out of a razor scooter
^^^^^^
Fishy McFishy razor scooters are aluminum. It will not hold an edge.
That sounds cool, but if they aren't made from aluminum they're made of crappy pot metal. An edge would never last with either, but if it's pot metal it would most likely crack. He could maybe make some razor razor blades though.
REED BROOKS dammit, why didn't I think of wheel bearings? 😂
REED BROOKS you know what would be cool though? If he took all the wiring, separated it by material, and made some sort of a Damascus (like Alec Steele did with the copper and nickle) and made something like box cutter blades.
I know you didn't intend to give the larger one a 'rough' finish, but I think I like it better this way. The contrast between the small/neat cleaver and the big/rough one really adds to the vid imo.
When he pours the “fuel” on his pants I died
Man, I swear there's no other content creator like you. Perfection I say.
Can we just take a moment to speak about how far his editing skill has come
I lost it when the "fuel" spilled 😂
Anthony Vandeput yup, that’s what turned me from being kinda annoyed at the super hack jokes and anti-Trump lame comments. I literally spit taked my coffee on my phone.
John-Paul Silke he's pro Trump tho
This is my second time watching the video the first time I didn’t Notice And later in the video I thought he Peed his pants
I honestly don’t care who is for or against the president of the USA. I’m definitely against bitch’n about it for four years and not actually getting anything done. Is Trump an egotistical douche? For sure but that’s every single president ever, it’s kind of a requirement for the job. Also he kinda looks weird and is bombastic but that’s no something that should prevent someone from doing the job especially according to a group of people looking for equality and acceptance, it works for people you don’t like as well. (I don’t like the man but have trouble finding his work in any way worse then some of the “better” American leaders, he’s just extra douche about it, and quite frankly me liking him has nothing to do with the work he needs to do.)
You cant watch tonnes of metal crafting videos on RUclips, but slim to none will be as funny and as enjoyable as ZNA. What a MEME lord
Only weapons channel that shows both the food tests and the eating of the foods used
Me: “oh what’s he doing putting the cleaver in between those bricks?
Eli: *literally grabs a flame thrower*
Thunderbob 56 It’s a torch, not a flame thrower
Oliver O'Keafe bruh just go with the joke
who else is here before youtube demonitizes love u eli
@@snakelord4080 its not demonized yet
Now that we got it perfectly straight shout out mike pence 😂😂😂😂
lmao got me too
Dang. That looks and is one hell of a quality knife. You could probably sell things like that for good money seeing how much work goes into making these and the quality. You could probably do that as a side hustle or even main source of income if youtube ever comes to an end. Making handmade knives and axes and stuff like that.
Oh okay. That's interesting to know. I don't know much about it but just thought the end result looked really professional. Thank you for clearing that up. Either way, Eli is very talented imo and puts in lots of hard work.
King Panda new mower blades yes but old circular saw blades and old mower blades were made out of extremely good high carbon steels my dad and I make and sell handmade knives and we use these a lot
King Panda lolol
King Panda I would put cpm-154 over s35vn but you are right
Van UnVanned
"Thats not a knife. This is a- wait, that's actually a knife"
That Mike Pence joke actually made me laugh way harder that it should have
P E R F E C R L Y S T R A I G H T
Me being the 69th like on this gave me a chuckle as well
Mike 'shock'em till they're straight' Pence
Mike "give 'em the shock till they don't like cock" Pence
Mike "the electric fence" Pence
Just some tips to help you out a lil
Don't use your vacuum cleaner to collect metal filings off the grinder, due to it being able to set fire to a bag/filter (if you got one in there) or sawdust. I'm glad that you didn't get discouraged from the last fire but I don't want you to ever just give up. Your work is truly inspirational (and inspired me to start making on RUclips (btw Thanks))
Secondly when hand sanding and moving through the grits change the angle between each grit, by about 30-45 degrees, this will allow the sandpaper to cut more effectively and it will be easier to see the the scratch marks for you to follow and if you can get higher grits try and go above your desired finish and go back (this will get you the best possible finish for them crazy shiny blades, its time consuming but if you have time the finish is well worth it!)
thanks for being inspirational
stay safe and happy crafting!
This video is proof that your videos are becoming different. Your channel is headed in a different direction, and it's looking awesome so far! Keep up the awesome work, can't wait to see what's next.
30 minuets is a long time but it held my attention and it was a great video I can tell you worked hard on it. Keep up the good work
I’m quite glad I didn’t skip to the build. Thanks eli
I wish there was a single zna video I havent seen
amen brother
love it when that “say it back” track drops during a ZNA build
I want to trust a girl as much as Eli trusts his two part epoxy mixing skills
Tom Cole #Dead
Gorilla epoxy doesn't require mixing really though...
I love the sheen in the dark all alone T-posing his little heart out
It's been a while since I've watched. The leap in production quality in the past half a year or so has been awesome (and it's not even that they were lacking in presentation before!). You've done a super good job, keep at it.
Watching these as I lay in bed and the montages with slow music put me right to sleep
Thanks
I can tell that you enjoyed making this video it’s really enjoyable to watch and entertaining
duuuuuude you need to grind away the oxide (the black crap ) with the angle grinder because the oxide is super hard thats why it took so long to grind away , plz like so eli sees this
That skit is hilarious.
Will K 1s nOt sK!t #Resistance
Assorted Subscriptions 😂
I almost don’t care about the build. The first half a dozen lame lawn mower anti-Trump jokes had me groaning but Eli didn’t let up and I actually spit my coffee on my phone. While I was cleaning up that mess I dropped it in the sink and kept laughing.
Those weren't anti-Trump jokes, they were jokes about certain types of vocal anti-Trump people.
EGRJ who are anti-Trump
My one constant thought from seeing the thumbnail to the completion of the hog splitter was just the phrase “good for the taking of heads”. That is easily the most *brutal* thing I’ve seen in months. 🤘
Shiny metal... Demonetized
Yo Eli I got 4 ads
I got 2
None
2
*H*ck yeah!* _its currently __1:30__ am and God has graced us with a half hour ZNA video_
It’s honestly so cool to see someone really care about what they do and watch them put time and effort into something to get the results they want. Respec
This was my first ever ZNA video. I saw it after ignoring it in my recommendations for about a week. So glad I was bored at two am and went down the rabbit hole of this channel
Brilliant intro!
I challenge you to remake your oldest build that you can find
Evan Reed the first build he's shown was essentially bladed squares in homemade weapons part 1
I feel like that's a good idea
i was going to say the same thing
It’s time to revisit... THE SQUARES
THE SQAURES!
"So even though this thing isn't absolutely pristine" *holds up mirror*
Dude, that was one of the best build videos I've seen ... way to Make Cleavers Great Again!!
I can't believe I thought that call was real 😂😂😂
Love S. Omg I know lol
Glad to see everything is ok after the fire :) God speed Eli and great vid as always
That intro was beautiful
Edit: rest of video was beautiful
That was a 6 minute intro.
It's so good tho, I can't even be mad lol.
I saw a new ZNA vedeo (at 12 :15 am), I wach a new ZNA video (in spite of needing sleep).
Jordan Stewart omg same goodnight bro
Fell asleep during it. Woke up at the sheen. Re watched it. Night guys and gals and cats and dogs and dangernoodles and my dream AR-15.
Bud
We won’t be mad if you split ur videos into part one and two, we get more video, you get more money :D
Jackson Smith
THIIIIIIIIIIIIIISSSSSSSSSSS
Easily one of the best videos you've come out with yet! So good.
5:11
I wasn't prepared for that reference ... WUMBO
The editing of this video is much better than previous videos. I especially like how the cuts match the rhythm of the song, not only does it feel natural but it also makes the video look much more professional. P.S. the hug splitter is a definite go-to zombie apocalypse melee weapon :)
Hog*
It could split hugs to tho
You should try and stream some of your work, would probably give you a lot more money. :D
I love Eli but, I don't know if I would watch 4 hours of sanding with no talking.
Friggin Boom Toys I agree and if he were to interact with the stream (read and respond to comments, etc.) It would probably take twice as long.
Yeah
I can really see why you said you were proud of this vid, bro. You nailed it with the skit at the beginning. I thought that's all the video was going to be, but we get a build too :D
Your channel is one of the most entertaining on all of RUclips. I appreciate your work and great sense of humor.
It never fails to make me laugh. Hysterically. For a while.
Love the work you put into your videos and I hope you know you are very appreciated for it. The quality of every single one of your videos (past 2015) is just amazing so don't worry bout like "would my viewers care if I do or do not do this?" don't worry about it. Every time you post I get excited so don't worry bout pleasing the viewers cause by doing what you like you already do my dude. Keep up the very hard but good work!
what he said
yeah^^^
Hey there's ads! Lol heck yeah
H*ck
eel1331 we really are the best fan base tbh
not anymore
Edit. oh there it is!
Yeah eel1331 you really have to watch your censorship this is a chrischan channel
Literally the only channel that I'm actually EXCITED to see ads on
Never been happier to watch an ad
"Not even nice enough to sell in a store"
Eli your modesty knows no bounds
That intro 😂😂
Zander Marriott Shills for a new sander after buying too big a house. Buys a junk children's toy to pad watch time.....
He is joking though? About trump?
EJ B ofc
That's just it, he's clearly not serious, but still doesn't parade his political views.
It just seems out of place and a little disconcerting.
*WUMBO*
wumbo
no its
*w u m b o*
*W U M B O*
He she we wumbos
@@masonwilkinson2300 wumboism wumbology the art of wumbo
Hey, look, ads! Still monotized!
Ethan Stevenson it's because RUclips doesn't detect satire
Not anymore D:
Ryan Edinger Still yes
Ursus Discursus Oh, It's back!
This is probably the most awesome machete making I've ever seen. Great project!!!
Very satisfying video eli. The cleavers look clever. If I had the tools and the space I would be doing what you are doing on my free time. Make a little extra money aside from my job.
Matt Nobrega Eeeeh I see what you did there
He....he....he
Build challenge: build a sword using no material other than one rebar scrap pine 4 feet of Paracord and 3 20d nails
rebar is mild steel
Aj V Rebar is melted down scrap steel, so it can be what ever steel quality. That means that one piece of rebar can have one inch high carbon stell and the rest mild steel, which means it is unfit for making tools and weapons.
Anton Jonsson yea unless forged and heat treated
@@AFUVFX Mild steel will not harden during a heat treat, that's the problem. It has too little carbon in it and stays soft and even brittle, it's not good knife steel, much less sword steel
That's a u have and u font want 2 get anything else do u
It says razor in title *DEMONITIZED*
Love the music choices! Those fast cuts at the start of working on it were melting my brain though.
You have it set on M for Mini whne gotta set it to W for Wumbo
Surayaa was that a real call
You should try to make an actual everyday carry style fixed blade. Like make it look really nice with a decent steel and all around good materials that will last long. Take time with the design and make it something durable and pretty to look at. Just a suggestion, but I think it would be really cool and I want to see what you can create and design.
Swagfag 69 i think he would be too lazy
Cats are aliens m
"too lazy"
>Spends 3+ weeks making 2 cleavers cause one failed
:thinking:
BRO!!!!! IT'S YOUR 10 YEAR ANNIVERSARY!!!!! PLEEEEEEAAAAAAASE!!! REUPLOAD YOUR FIRST VID!!!!!!!!!!!!
I love how he answered by saying, hey it’s me 😂😂😏
The hog splitter looks like something that would be in Silent Hill.
Or Bloodborne.
it does tho
That's exactly what i was thinking lmao
Your profile pic doe
*hogg
Loving the new kind of montage towards the beginning of the build. Great video. One criticism is that I remember a time where I felt like i learned a new build technique in each video and I feel that the educational aspect of the builds seems to be missing in this one and I hope that's not foreshadowing the future of these builds. Still an awesome video.
Absoloot Disastr What im saying is a long time ago videos were basically a how-to guide or at least he explained his process each step of the way so you learned things. I'm not saying it's a problem that this aspect is gone I just miss it.
“Set it to 420 and u blaze it “
I wonder how he felt when the flap disk on the grinder brought the shine of the metal in a few seconds
Flap disks for initial rough work makes things so much faster, they're amazing
This video is Absolute perfection
Homeowner's Associations:
"YOUR GRASS MUST BE ZIS HIEL!" *leans over and holds nazi salute 2" from ground*
WUMBOLOGY, THE STUDY OF WUMBO? IT'S FIRST GRADE ELI
You should invest in a horizontal spindle surface grinder. Even a cheap crummy one would work wonderfully for that
You need to get your content on instagram, your content would do amazing there. Take angled high quality photos of all your builds, put a cool filter, post and profit. You could also do teaser videos to drive traffic here.
ryan904FC good idea. Really! Sorry if I sound sarcastic😅
Lil Chromezome If someone said that to me in real life I would assume that they were saying it Sarcastically so I was clarifying that I was not saying it sarcastically. Does that answer your question?
Best lawn mower review ever.
This video put me in such a good mood thank you for that
Brah you're so personable and easy to watch. I don't even know how I got here, but here's a sub.
Imma watch this video like 50 times just to see the ads and make you money 😂😂
Mac Baise or just share the video lol
Bro your humor, editing and building have gone stupid high. GG bro!
7:19 saw a meme in the bottom corner
✔ seen
Who didnt
@@camonsamon4894 idk ppl who are blind
@@SmokelessMeme actually nameless is correct
Yeah
Watching this channel made me realize that modern epoxies would be an unbelievable wonder to people even a century and a half ago.
Forget the advancement of techniques and machinery, I'd imagine that the ability to mix two compounds and get a very resilient bond would blow minds. Doubly so when it's something so absurdly available, to the point that it's barely remarkable. Sure, glues have been a thing since before written history, but epoxy is a whole different animal.
Somone say david hogg?
Garrison hogg splitter 😂😂😂
That's the reference he was gonna make?
I wish that’s the hog we could split
s glick indeed
Love the spongebob wombo refrence
It would be crayzy if RUclips demonetized this
RUclips devs: *nervous laughter*, yeah
3:33 i *literally **_DIED_*
no i didnt... or did i?
xDaRkSuNx no you were right the first time, don't worry though you get be ghost now.
*Incepcion horn*
Damn dude, these videos are so much different stuff all piled into one. lawnmower jokes, cleaver building action, chopping and cooking. Noyce. Glad I found this channel.