Mine arrived and your mold doesnt fit. I called, and was told they all fit. Well, not sure you are aware but every console is hand put together. My leather which folds over (around the outside of the aluminum trim) is thicker, and would require both the bottom curves and the side thin strips to be more narrow. It will not sit flush and it will not hold down. Due to this, the reverse lifts up the entire piece when you go into reverse. So I basically have a useless piece. Just be aware it make or may not fit flush for your ride. Ive ordered a lot of pieces and they all look and fit great. But this was a let down cause it looks so good and the response I got when calling wasnt cool considering how much money ive spent.
Hello Sir! We recommend professional installation as this piece needs to be adhered correctly and properly as it is very important, as if it's off just a bit. We can send a replacement if needed or new tape to help out with this, and will try our best to help you out. We have sold many, many from the same mold and have it on our Next-Gen C8 without any issues (:
BUYER BEWARE……..This item is no good. Tried reapplying 3m tape twice. Defective product. NExt Gen will tell you itS you not applying it correctly. Not my first rodeo. Bad Product!
Hello Lance! We are truly sorry about your experience! We will be glad to send one with fresh tape, but truly recommend professional installation with adhesive promoter and firm pressure. We have this on our own since the release, without issue. And also install many, many for local customers without issue since release last year. If off by just a hair, it can cause obstructions since the button lever clearance is so tight. With over 500 customers on this product, we have seen the common thing happen, but with slight adjustments, adhesive promoter, and or extra tape the item stays down in place. I hope we can help get this firmly installed for you and get this resolved.
@@NextGenSpeed your reply if a bit insulting. I have been installing carbon fiber parts for year. I have always use alcohol to clean, promoter and pressure…..is not my first rodeo!
Mine arrived and your mold doesnt fit. I called, and was told they all fit. Well, not sure you are aware but every console is hand put together. My leather which folds over (around the outside of the aluminum trim) is thicker, and would require both the bottom curves and the side thin strips to be more narrow. It will not sit flush and it will not hold down. Due to this, the reverse lifts up the entire piece when you go into reverse. So I basically have a useless piece. Just be aware it make or may not fit flush for your ride. Ive ordered a lot of pieces and they all look and fit great. But this was a let down cause it looks so good and the response I got when calling wasnt cool considering how much money ive spent.
Hello Sir! We recommend professional installation as this piece needs to be adhered correctly and properly as it is very important, as if it's off just a bit.
We can send a replacement if needed or new tape to help out with this, and will try our best to help you out. We have sold many, many from the same mold and have it on our Next-Gen C8 without any issues (:
Take my money right now. Please. I need this.
Just placed my order for this piece, , just waiting on the dash trim notification once that is back in stock.
Stay tuned in a few minutes (:
@@NextGenSpeed I’ll be waiting
DAMN!! you wasnt playing!!! im ordering right now
Done, i have two orders with you now... one yesterday and one today..
When will you get C8 Corvette Carbon Fiber Door Striker | 2020+ Corvette back in?
🎉
“Guys” count: over or under 10 for a 3:33 min vid.
13. I would have been under.
Sorry man! I’ll try to be better😂
BUYER BEWARE……..This item is no good. Tried reapplying 3m tape twice. Defective product. NExt Gen will tell you itS you not applying it correctly. Not my first rodeo. Bad Product!
Hello Lance!
We are truly sorry about your experience! We will be glad to send one with fresh tape, but truly recommend professional installation with adhesive promoter and firm pressure. We have this on our own since the release, without issue. And also install many, many for local customers without issue since release last year.
If off by just a hair, it can cause obstructions since the button lever clearance is so tight.
With over 500 customers on this product, we have seen the common thing happen, but with slight adjustments, adhesive promoter, and or extra tape the item stays down in place.
I hope we can help get this firmly installed for you and get this resolved.
I did use the promoter twice since you guys sent me more tape from the first time that it didn’t adhere. @@NextGenSpeed
@@NextGenSpeed your reply if a bit insulting. I have been installing carbon fiber parts for year. I have always use alcohol to clean, promoter and pressure…..is not my first rodeo!
Stick on trash
@@TBagr We offer replacements too😎