Woodturning - How to Grind a 40/40 Bowl Gouge - Vevor Grinder Review
HTML-код
- Опубликовано: 29 июл 2023
- In this week’s woodturning video, Harry was contacted to see if he wanted to try out an 8-inch Variable Speed Bench Grinder. What beaver doesn’t want new tools to play with his wood with?
Vevor sent us along a grinder with a 36 and 80 grit wheel. I was wanting to get a second grinder to keep course grit wheels on to do tool reshaping and reprofiling so it was a great opportunity.
As for the grinder itself it did a good job. If you’re planning to use this for woodturning an upgrade in a platform system or a Wolverine Jig would be a must. You can’t get an accurate grind with these platforms as there is too much play.
If you’re looking for a cheap 8in grinder I think this might work for you. It’s about $70 less than most on the market and with any of them you’re most likely going to get a grinding jig of some sort such as the Oneway Wolverine Jig - amzn.to/3hUZRh9
If you’re in the market for a grinder and don’t want to spend an arm and a beaver check out the Vevor! Use the code SAVEMORE5 to save 5%.
VEVOR Grinder: s.vevor.com/bfQmxi
I managed to get a good 40/40 grind on my Glaser V15 gouge. The most challenging part of it might have been getting the platform to 40° but after it was complete it cut like a champ!
Harry and I hope you enjoy the video!
Got a woodturning question? Post it in the comments and possibly get
featured in a future woodturning video!
Interested in pieces I turn? Check out my website!
www.hodgepodgeww.com
Feel like buying a beaver some wood?
www.buymeacoffee.com/hodgepod...
Ack’s Abrasive and Polishing Paste. If you would like to try some save 10% off your order by use the coupon code "hodge10" at checkout!!
ackswoodpaste.com/shop
Get the Freshest CA glues in the market at Starbond www.starbond.com/?rfsn=457360...
Use Code HodgePodge at checkout to save 15% amount on your purchase
Checkout my Etsy Store:
www.etsy.com/shop/HodgePodgeW...
HodgePodge WoodWorks Merch here:
teespring.com/stores/hodgepod...
Inclined to help the project fund:
www.paypal.com/paypalme/Hodge...
Follow me on Instagram and Facebook:
/ hodgepodgeww
/ hodgepodgeww
Products I use:
POWER TOOLS:
Powermatic 3520 Lathe (newer model) - amzn.to/3hUz3h1
Foredom Woodcarving Kit - amzn.to/3i16cY3
CHUCKS/MOUNTING:
Nova Titan III Chuck - amzn.to/3u1ho9v
Nova Supernova 2 Chuck - amzn.to/33YCU4m
Oneway Live Center - amzn.to/3wsydMt
MISC:
Oneway Wolverine Jig - amzn.to/3hUZRh9
6in Stainless Steel Ruler - amzn.to/33Z7ElP
WEN 400CFM Air Filtration System - amzn.to/3yoxc9Q
8in Compass - amzn.to/3bHTpWu
Lincoln Omnishield Face Shield - amzn.to/3hDJqpf
3M Half Respirator - amzn.to/3wq1fMn
General Tools Moisture Meter - amzn.to/341R1pv
Plastic Center Finder - amzn.to/3u6JlNd
Deluxe Rotary Inertia Sander - amzn.to/2RtbXmO
Robust 9” Small J Curved Tool Rest - amzn.to/3u6GT9J
FILMING:
Sony a6000 Mirrorless Camera - amzn.to/3f71QNk
Ranger 56” Travel Camera Tripod - amzn.to/2SaDhpJ
FIFINE USB Microphone - amzn.to/3f7lpVC
Neewer Photo Light Box - amzn.to/3v5G8Pi
*Some of these links may be affiliate or sponsor links. Any potential purchasing or even clicking on these links will help support Harry and I and help us make even better content.
Thank you very much for all of your support!
#woodturning #40-40 grind #vevor #woodworking #woodporn #projectsthatsell #giftideas #woodlathe #lathe #woodworking #art #vevordiyproject #diyproject #howtosharpen #4040grind #4040bowlgouge 
Хобби
Thank you Robert and Harry for the information
Great instruction, Hodge! Tough to do on that small platform. Looks like a pretty decent little grinder though overall. Nice review!
Great video Robert.
Thanks. Cool.
Cold grinding.
Nice Jerry Glaser T15 bowl gouge. They take and hold an edge better than carbide in my opinion.
Invest in the Oneway wolverine sharpening system, you won’t be disappointed.
Thanks! I was super excited when I saw it on a tool auction and the seller made no mention to the fact it was a Glaser gouge. I've got the Oneway sharpening jig on my other grinder as well as Stuart Batty platforms. I was just testing out this other grinder that was sent to me, which will ultimately be used for reshaping.
Nice job of re-grinding. I cannot imagine what he did to get that big notch in the side.
Thanks Doug my guess is the gouge some how fell into a gap and got sort of stuck between wheel and platform.
@@HodgePodgeWoodWorks could be. You said early in the video, he didn’t know what he had. Too bad for him, but great for you.
Pas facile à réaliser mais efficace bravo Hodge 👍👏
👍